7 Construction Math Hacks: Estimating & More
Vložit
- čas přidán 26. 01. 2024
- Math is power... especially in construction. You can dive as deep as you want into mathmatics
as a carpenter and many times, the more you know, the more you make. The math shortcuts in this video are not complicated. Anyone can do them and every carpenter needs to be able to.
Here's another fun math hack: • How to “Quarter in an ...
Free Starter Blacksmithing Tool List bit.ly/blacksmithingtools
Free Guide - 100 Tools Every Craftsman Must Have bit.ly/EC100tools
Enjoy EC? Learn about Essential Craftsman Academy!
essentialcraftsman.com/academy
This is the best way to support Essential Craftsman and you get a LOT of perks as a bonus.
Check it out.
PODCAST👇
Spotify spoti.fi/39ezy3d
Apple apple.co/33dbrJQ
Stitcher bit.ly/3NWy8sY
CZcams bit.ly/2n4HCLG
Second Channel (Podcast video, family, misc content) bit.ly/2n4HCLG
If you are going to hire a contractor for a big project PLEASE read our ebook first!
amzn.to/2v6qZ6j
T Shirts, Hoodies, and other Merch: bit.ly/2C7JFRv
Instagram / essentialcraftsman
Twitter / ecnatwad
Facebook / essentialcraftsman
Amazon Affiliate Links:
Amazon Store amzn.to/2pcUk8G
Makita 18v Impact amzn.to/2R9uamN
4 ft level amzn.to/389qsQa
Utility Knife amzn.to/2RjVRJL
Palm Nailer amzn.to/2LhvTTd
Spencer Tape amzn.to/2EQWxPy
Carpenter Bags amzn.to/2XeBaC1
Belt bit.ly/3MsdijV
Hammer amzn.to/31y4q66
Tape Measure amzn.to/2WYg23Q
Skil Saw amzn.to/2UcQyLi
Video Equipment and Misc.
Main Camera amzn.to/2WG9qSC
Secondary Camera amzn.to/32tS2Vx
Microphone (for narration from office) amzn.to/2WquPnM
Wireless Microphone amzn.to/2IGpNto
Other Wireless Microphone amzn.to/397VmxJ
Tripod amzn.to/2XOJcOd
GoPro amzn.to/3znHgTA
GoPro Tripod amzn.to/3aL8pFH
Battery Bucket amzn.to/3GVR9cV
ActionPacker amzn.to/2l7Msqv
www.essentialcraftsman.com/
I run a small carpentry business with 2 younger (early 20's) employees. I had one employee tell me he was watching one of your videos the other day. I immediately felt comfort knowing that he was learning from a man of great knowledge and experience. Somebody who has a heart of a teacher and wise enough to have a CZcams channel to share that wealth of knowledge. Thank you sir for that. You are grasping the right audience that way.
He isn't teaching just the young!@ ones
Where are you located kasey lol, need another 23 year old???
This guy and Stumpy Nubs are my go to for teaching.
You lucked out with that employee. Self-motivation is hard to teach.
👍
Here a student of this great teacher
This makes me feel good. I’m 25 I wish my father was like this he does carpentry and knows a lot of every trade and has taught me a lot but this guy is what I aspire to be.
I was good at math in school. On my first construction job we were laying out lines on the site for a lazy el shape that had piles of fill around it that didn't allow for clear measurements and straight lines. (this was in the ground for a foundation). My boss was getting frustrated trying to lay it out and I finally opened my mouth and tried to tell him how to use Pythagorean's theorem. After a couple more failures he finally let me do what I was saying and laid I it out in perfectly. This was 1971 so I had to do the calculations on a paper bag. I immediately became his lead man. Math is good.
That's ago, some guys were trying to build the architect's stream, the builder's nightmare, of curved walls. This one with a 70' radius, that one with 112' radius, etc. They spent hours with take measures and line pieces of stuff wire and couldn't make it work. Finally, when it came to the wall that was a 250' radius, they were ready to throw in the towel.
I built them a spreadsheet that converted the radius into a table of offsets and they could lay it out in no time with a dry line and a flexible batten. Math
when young people like me say "where would this kind of math help" in school, NONE of my teachers have been as articulate as this. the hard part about "enjoying" math is seeing the fruit of all your memorization, but this REALLY helps!
This, so many times, this exact thing is what teachers need to understand. In school I didn't get this from a math teacher, I got it from a chemistry teacher making a comment about how they used trig to find the slope of a roof (small structure) and then taking those results to find area for sheeting and subsequent insulation and the like. It was a lightbulb moment for a lot of kids in the class.
I just use a2+b2=c2
I was no good at math in high school. Things didn’t start making sense till I went to college to learn forestry and a little bit of surveying. Every day I use pretty basic algebra and geometry and I wish teachers could have gotten me more into it earlier
I took a calculus course aimed at technical people. Practical calculus, and it was actually fun. No proving theorems, no graphing of equations, just take this number and that number and do this with them, and there's your answer. I was a civil engineering / survey tech, and I still use it for my building projects and handyman work sometimes. I had calculated many things by the "iterative" process, which means calculating a thing over and over until you move in on it and get close enough to the number you're looking for: for instance the high or low point of a ditch or berm. You can do it quickly and easily with calculus. I never thought of calculus as something practical that would make calculations easier. Same thing with geometry and trigonometry. They're not mysteries to be afraid of, they're handy tools to use when you need to plan and build something.
@@coyotech55 same. I never understood the point of trigonometry for example. Then I became an electrician and I realised it was needed for the triangle of power
PS - I forgot to mention as a DIY person. The amount of percentage waste I allow for depends on the material.
Reason I say that is, because if you’re dealing with timber or aluminium, you can get away with 5%
But if you’re dealing with something like floor, tiles or roof tiles
You’re better off with 15%
Because at the end of the day, when you have those extras left over, you now have spares that will 100% colour match the original
And as you know, tiles are baked in batches with glaze, and if you need to replace a few tiles here and there a few years later, the colour will be different
But if you were to allow 15% overage that covers the breakages on the job, the odd normally here and there, that gives you a good amount to stack in the corner of your garage as spares ……..
And if you have a damaged floor tile that you cut out with an angle grinder and drop in one of the spares because the concrete slab has settled and cracked a few tiles, you will be glad you had 15% overage……
I would suggest for your viewers, it depends on the material
I'm a carpenter here in Northern California been watching your channel for years now so many tricks and tips I've learned I always tell the guys I learned this from uncle Scott. Thanks the continued gift of wisdom.
I enjoy hanging around people smarter than me. Having a cup of coffee and your videos is truly a pleasure. Thank you.
So do I and so am I 😂
(That makes you both smarter - or at least wiser - than most people!)
You're not hanging around him though
I can’t say it enough. You amaze me. I would love to be your shadow. You have so many life skills that I and the rest of the world would benefit from. I am not in the same trade as you. But the knowledge you share translates across life. Thank you for being you. Thank you for sharing. Please never stop recording.
Mathematics is most definitely Power. It is the fabric of this Universe. Having earned a Bachelors Degree and a Masters Degree in Applied Mathematics, I can truly state the sheer elegance and power of Mathematics.
When I wrote my carpentry exam there were many questions where it asked you to measure quantities. The real skill as a carpenter is “what should I order”
Never been to school for my trade, but in my opinion, no matter how good you are at estimating, if you can’t work the tools, you ain’t no carpenter.
30% more
Story time: Math DID get me a raise and some job security too. Set up: I was putting up tar paper with a GC on the second story of a building with a nasty grade beneath. We needed a length of about 20 feet. Without thinking too much, I peeled off a length and started a "new roll," a circle with a one foot diameter--> rolled it 7 thick.... Here's the math: a circles circumference is pi if the diameter is 1-->7X3.14... is about 21, so about 20 (with a little bit to play around with). No multiple trips up the ladders or resets, no seams or waste, no wrestling around with a bulky roll and trying to manage it while positioning the piece and stapling... GC's face.. He asked me later if I would be happy with an X (about 20%) increase in pay (duh), and offered me one of the most genuine complements I've received in the trads or otherwise; said clearly wasn't another s*** head and he to keep me around.
TLDR: Use math to impress you boss.....
3 4 5 rule. 43 years as a plumber/plumbing contractor. Invaluable. I am retired now but I volunteer at a vocational training school here in Medford and we teach this to all. Keep up the good work brother
The next step from that is memorizing the standard triangles
Bigger areas use the 6,8,10
1.4142...
I’ve never built anything. In fact, I don’t even own a power drill, but for some reason, I really enjoy your videos. Keep up the great work!
You oughta change that! Building stuff, ANYTHING, is very rewarding.
I used to think the trades were for stupid people, but I've used more math as a builder than I ever expected to in my whole life. Arithmetic, fractions, and enough context to look up semi-complex formulas when you need them will give you a serious advantage in life and in the trades.
As a machinist always working with angles- a young man showed me a trig app. Wow! What a game changer. In 30 seconds I have an answer.
Care to share the name of the app?
@@esp1818 horitech trigonometry calculator
I use Trig Solver. I worker my career as a Machinist and used up truck load of pencils calculating angles. The app saves a lot of time but takes away the skill.
I'm not even in construction. I'm a Mechanic but I find your videos absolutely fascinating and I've learned things I never knew I never knew and even put a few of them into action. And I have to say thats one of the most succinct descriptions of Pythagoras Theorum I've ever heard, brilliant.
This might be the most important you tube channel ever
THE 3 4 5, 3x3=9
4x4=16
9+16=25
the SQUARE ROOT of 25=5
PERFECTION!!!
A good laser level helps. I hate green colored lasers. I red laser is still easier to see than green on red brick. Can't we get lasers in blue and orange some of the most contrasting colors. We order extra 2x4's so we can send junk wood back.
I am glad you mentioned the pythagorean theorem. I have worked with and around many carpenters through the years that knew the "3-4-5" rule but didnt actually know what it was or the equation for it.
Doesn't matter as long as they knew how to use it. Just like Plumber can determine the length of any 45° offset by measuring the distance between the two pipes and multiplying by 1.41. Where 1.41 is the square root of 2 which is the hypotenuse of a 1 X 1 unit triangle.
Is this information important to understand while attempting to determine other TRUTHS or LAWS if you will, yes! But certainly isn't important for the Plumber that is just concerned with HOW to solve for the field issues quickly on the fly.
Good useful tips. Hopefully the underlying message to young folks is "Yes, you will use arithmetic and math in your everyday life." I find that there is a disappointing number of people that see the simple math you describe as an insurmountable challenge.
I wish math teachers had presented these formulas in real life scenarios.
I started as a carpenter in 1976 building custom homes. Eventually I joined the Carpenter Union and started heavy construction. Eventually I started in WA State Department of Natural Resources in Engineering Division with the Carpenter Shop. We built fire lookouts and other projects statewide. Eventually I was appointed as Construction and Maintenance Superintendent. I started with DNR 1983 and retired in 2012. I still work in construction.
Another thing about that 3,4,5 square... it has an area of 6. So it's a 3,4,5,6 triangle. The rules of trig are very handy also. Always remember So... Cah... Toa. SOH, CAH, TOA. Sin of the angle = opposite/hypotenuse and so on.
I have a Construction Master app on my phone it figures every square including fractions, concrete for sauna tubes, walls footings floors roof rafters stairs and way more than you could ever imagine.
My general rule on concrete is to order a little extra. And have a place to go with the extra.
That's the Law of Material for any large quantity of material
Concrete estimating rule that never failed me: 1) Do the math exactly 2) Round up (no matter the remainder) 3) Add 1 more yard.
I figure 1 stud per foot and that gives you the trimmers and corners. That's even easier
beginning 2 AM, had a stressful morning. this..........calming, informative, worthy. Scott, gotta be lots and lots of builders who needed this and will use it. well done! ciao
I'm a drywall pro, you can rough figure the wall and ceiling footage in an 8' ceiling house at floor space times 3.5, a 9' house is 3.75. That'll give a good enough idea for a footage quote. Common applications only of course.
I think EC should do a video on valley/hip rafters when there are two different pitches coming together. I had a devil of a time figuring out the math when I had to do a rafter between 12/12 pitch and a 4/12 pitch.
Great tips, Scott! This was very informative for those of us who occasionally build stuff.
This is my favorite sort of video you produce. Explaining trade practices, or methods of how to use basic hand tools etc.
You sir are always a wealth of knowledge. Keep up the excellent work
WOW, you packed a lot of wisdom/knowledge in this short episode. “Keep on Keeping on!” Tim in northern TN
This is great stuff. Thanks for posting. Thumbs way up!
Passing on wise knowledge....thank you for the video and for always trying to teach us!
This man is a Gem to us that are always learning. Thank you for your time sir.
Not a contractor. At time I will skip some parts but it is always a pleasure to watch your advice.
Thanks for taking time to share your passion.
Awesome thanks
Fantastic video! Thank you!
In those two mathematical examples you showed with the squares saved me six months of studying and study fees. Blew my mind😲
I use the 3-4-5 rule when I need a parallel line to start running metal panels on a roof. Sometimes the eave is all wavey even on new construction so I make a bunch of 6 inch marks on the bottom then hold a chalk line and snap it when it looks like a good average. Then I do the 3-4-5 marks off that line to chalk a perpendicular line that will be parallel with the first panel. I also measure for roof penetrations so hopefully none land in the overlap of the panel.
Math memory tricks are useful in aviation too. You’ve given some great ones here. Your line about comfort with math leading to higher income is spot on…. I am proof.
The only difference between pros and newbies is the number of shortcuts we know - use the alligator to remember less than/greater than, i before e, etc.
I went into piloting from construction.
You’re the best, thank you for all of your wisdom
Keep up the good work
Another great one, thanks for all the knowledge..:)
That was just great video! Thank you 🤯
Thank you for sharing these skills here for future generations. I appreciate all the hard work you do to put out these videos and I'm sure I'm not alone. Keep up the great work sir.
For estimating, especially for precision I use ÷144 alot to get an acurate square footage. Measure to the inch, multiply and divide the answer by 144.
Very helpful and timely, thank you!
Most people learn the 3-4-5 rule pretty quick in their constuction careers, but really grasping and understanding the formula for the reason it works (A²+B²=C²) is a real eye-opener for so many other applications.
I love these videos. Really a great source for information
You're a hero. Thank you.
Muchas GRACIAS señor carpintero...👍🏼👌🏼
Thank u for the service you provide.
Great episode
For us amateurs building, eg, a garden shed, the tool of choice is Excel with every part in the sketch accounted for in the spreadsheet.
For my project there was very little waste material and no "missing" material.
(Also made cost estimating very easy to do).
Made your own Lego set 😂
@@clevernamehere7559 ?
Thank you for these crucial tips
What a smart guy! True craftsmen!
Math never lies. I was bad at math in high school but had some old guy teach me tricks (and I listened) when I was building the B2 and the F-22 for Boeing at 19 years old.
Excellent video full of usefull information. Another good channel that doesn't really teach but opens the books on estimates for lumber, concrete, sheeting, etc is Ken's Carpentry which is a crew that mainly builds garages in Maine. He has lots of solid info about bulk materials purchasing and forecasting materials costs.
Great concise and very helpful I hope to the young folks coming up
Absolutely great knowledge
Great information
The right triangle solver app is free and priceless.
Very wise video!
Nice lighting
Thanks!
Great tips! The hip or valley angle of rise/17 can also be understood using A squared + B squared = C squared. The hip or valley runs the hypotenuse of the 2 adjoining roof runs. Since those 2 adjoining roof runs are based on 12" run, you can calculate the Pythagorean theorem of 12 x 12 which equals about 16.97, close enough to 17.
Awesome video
Good man to explain this thank you
you have probablly already gotten many comments on this but just in case- i've been a carpenter since 1964, and enjoy your utube shows, but an easier way to figure concrete as told to me many years ago by a cement finisher)= feet x feet x inches x .0031 fast and easy. thanks for all rhe info, keep up the good work tom c western PA
Interesting, that seems a lot easier!
This guy gives off big "It's the right thing to do" Wilford Brimley vibes.
I hear Wendell berry vibes myself
Would that be the same as the Wilford Brimley vibes from The Firm?
@@reidflemingworldstoughestm1394 Wholesome contractor content by day, cold-blooded enforcer by night...
I love your channel. You’re like the Rick Steves of the construction industry 💪🏽💪🏽💪🏽
Dam good food for thought‼️
Ty🍻👍
Amateur "home pro" here on a couple of things that have turned out okay, mostly flooring, but a few odds and ends that turned into pieces of furniture and other things. But on flooring, with one exception, I have always added about 15% to the amount that I measure. Except for my first entry into putting a travertine floor in the guest bathroom. I measured the floor, and found a closeout on a stone that my wife and I likes, and they had exactly the amount I needed, per the drawings.
Bottom line, I ran out by "just a tiny bit" behind the toilet, but I was able to fill in the void with an offcut and some construction adhesive, and I will never tell anyone to look at the spot I know is a fill.
From that point on, I have always preferred to have a buffer for badly cut material or material that I don't want to put up with for whatever reason.
Thanks as always for your channel, your content, and your whole positive attitude.
A 3-4-5 triangle is called a pythagorean triple. 5-12-13 is another one. There are so many of them.
The law of cosines applies to any triangle, regardless of the interior angles. It is a more complex form of the pythagorean theorem. It is, for any three sides of a triangle, a, b, and c, and their opposing angles, A, B, and C, then
c^2 = a^2 + b^2 - 2ab*cos(C). When Cosine(C) equals 0, that is, when C=90 degree, then it becomes the pythagorean theorem. This assumes you can measure the angle C, between sides a and b. Any triangle will work for this formula if you have the angle included in two measured sides. There is also a law of sines that is really easy.
Also, if you really want to go hardcore on math, don't use degrees. Use radians, look them up. For example, if I know the angle of an arc in radians, I just have to multiply the radius of the arc by the angle in radians to obtain the arc length. Radians simplify a lot of arc maths. Of course, lines that aren't straight and angles that aren't 90 degrees (or pi/2 radians) aren't common so it makes sense not to need to know this stuff.
I have a degree in computer science, and work with math every day. My hobby is building and reno, this was still very useful.
Just the thumbnail alone got the gears in my head working
I love your videos
These are cool gotta sub for this
Hip and valley cuts -- using Pitch divided 17 only works if both sides of the hip and valley are the same pitch. If they're different (we call them bastard hips/valleys out east here), then that divisor has to change. The 17 is derived from the fact you're implementing a 3rd dimension into your slope calculation.
For a hip or valley with an 8/12 on each side, picture two right triangles with legs of 8 (vertical) and 12 (horizontal) at right angles to one another, with the vertical 8 leg in common. Looking top-down on this arrangement, you'll see that with the hip or valley (not the jack rafters) you'll be connecting the top of the common 8" leg with the perpendicular projections of the two ends of the 12" legs. Essentially trying to find the 3-dimensional diagonal of a box 12w x 12l x 8h. (12 * 12) *2)) = 16.971
This is one useful video hack. I am not a math genius, so I'll have to refer back to this video consistently.
I just square A hit add then square B and hit the square root button on me pocket calculator and there's my hypotenuse like you do as well another thing is handy to learn is converting tenths and hundredths into inches and fractions on the fly in your head
Enjoyed your explanation of trigonometry and used it many times. BUT, now there's a App for that. I use Trig Solver. Just fill in the blanks and the solution is pop's up. Works great.
Substitute 17 for 12 if the hip or valley is at 45°. Because the run is now the diagonal ( hypotenuse) of 12,12, which is 17 (16.96), but the rise remains the same.
yes. if the hip / valley rafter is 45 degrees. Be careful of the Bastard Hip!
my question .. 2779 . How did you get/find the degree symbol?? thanks.
@@williamdemilia6223 Press and hold the ALT key and type 0 1 7 6 on the numeric keypad of your keyboard.
ASCII code from way back. Alt + 248 is degree symbol. 90° forms a right angle. @@williamdemilia6223
"Waste happen"
Wise words indeed. 🤔
Nice.
1.2 construction sounds like a cool name for a company .
Goldmine!!!!!!!!!!!!!!!!!!!!!!!
As a life long metric user, I can't understand almost a word of what your saying. I feel like the imperial system is very good for the math brain
Glad the old man is back. It was a bear listening to Nate on the last video.
Hey ... Scott is not an old man. no way!!
I don’t have to remember cause I just saved this video! Thanks 😊
This guys a father figure for me
Scotty and I are just a few years apart… and I look up to him too!
I need this so bad
I don't do anything in construction, but I enjoy content even from Trinidad and Tobago
They may take that concrete back; and they may sellout to the next guy, but you ain't getting any credit for it. Always good stuff, Always. Thanks.
Hi I’m just starting in construction in Australia I was wondering if you could put a second conversion in, (kg,cm) ect when displayed on screen, appreciate your time and work.
IBEW loves the pythagorean theorem
if you are lucky enough to live in oregon and run in to him he really is an absolute legend of a man and great person
he spreads great knowlegde
much respect
3rd to comment!!
Thanks Scott, I hardly build anything, maintain lots of stuff, but find so much wisdom in these videos I watch them all and give them a thumbs up!
Very usefull! Unfortunately you don’t have a lookalike in the metric world.