PRO COPPER PIPE BRAZING | THESE JOINTS ARE FLAWLESS 😎

Sdílet
Vložit
  • čas přidán 11. 11. 2023
  • how to braze copper, I brazed these copper pipe joints like a pro notice that i didn't burn rubber grommet or ac unit panels . #d2dnyac
  • Jak na to + styl

Komentáře • 13

  • @Uptown212HVAC
    @Uptown212HVAC Před 2 měsíci

    Very nice! I think I may have parked next to your truck van thing on the dead end of 57th St on the east one day last year.

  • @LuisRamos-rw5yu
    @LuisRamos-rw5yu Před 8 měsíci

    Also I really like videos

  • @krishuntzeroable
    @krishuntzeroable Před 8 měsíci

    Turbotorch and stay silv?

    • @D2DNYAC
      @D2DNYAC  Před 8 měsíci

      Turbo torch and silver solder

  • @boywhohadatiger
    @boywhohadatiger Před 8 měsíci

    Do you use a b tank or Mc tank for your acetylene?

    • @D2DNYAC
      @D2DNYAC  Před 8 měsíci +1

      B tank

    • @boywhohadatiger
      @boywhohadatiger Před 8 měsíci

      @@D2DNYAC thanks. I’m have issues with my Asco air torch setup being inconsistent when my Mc tank is under med but from med to full lt brazes very well. I’ll give the b tank a try maybe the larger size tank will help

  • @LuisRamos-rw5yu
    @LuisRamos-rw5yu Před 8 měsíci

    How

    • @D2DNYAC
      @D2DNYAC  Před 8 měsíci +1

      Use a piece of cotton rag approximately 2 inches wide 12 inches long wet it dripping wet, then wrap it tightly around the pipe, while keeping it tucked to the unit and rubber grommet
      When you braze angle your torch so that the flame points away from the unit panels,and just go for it never be concerned about the grommet, try to braze the joint as fast as possible.

    • @D2DNYAC
      @D2DNYAC  Před 8 měsíci +1

      If your brazing skills is not up to par then have a spray bottle with water close so you can spray and re wet the rag on the fly, keep in mind if too much of the water evaporate from the rag then you can potentially ruin the grommet and whatever is attached to the pipe on the other side of the panels

  • @JDT738126
    @JDT738126 Před 7 měsíci +1

    I can do better 😎

    • @D2DNYAC
      @D2DNYAC  Před 7 měsíci +1

      😂 then my friend own a very valuable set of skills