How to Replace Rear Wheel Hub 07-14 Ford Edge
Vložit
- čas přidán 27. 07. 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHF00214
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2007-14 Ford Edge.
• Check here for more videos on the 2007-14 Ford Edge: • Ford Edge 2007-2014 1s...
This process should be similar on the following vehicles:
2007 Ford Edge
2008 Ford Edge
2009 Ford Edge
2010 Ford Edge
2011 Ford Edge
2012 Ford Edge
2013 Ford Edge
2014 Ford Edge
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oeU/1AXAA00020
• 10mm Socket 1aau.to/ooB/1AXAA00017
• 15mm Socket 1aau.to/ork/1AXAA00015
• 19mm Socket 1aau.to/ohD/1AXAA00043
• 32mm Socket 1aau.to/oB/1AAST00003
• 1/2 Inch Air Impact Gun 1aau.to/obk/1AXAA00252
• Air Chisel 1aau.to/op/1AXAA00270
• T40 Bit 1aau.to/ode/1AXAA00008
• Ratchet 1aau.to/osE/1AXAA00016
• Torque Wrench 1aau.to/okx/1AXAA00044
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/obW/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/obo/1AXAA00343
• Center Punch 1aau.to/oaM/1AXAA00055
• Grinder
• Hammer 1aau.to/oeN/1AXAA00091
• Sledge Hammer 1aau.to/oeN/1AXAA00091
• Wire Brush 1aau.to/obx/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Ford Edge 2007-2014 1st Gen: • Ford Edge 2007-2014 1s...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Very professional I like the fact you give torque specs while doing the procedure. Thanks!
Just for clarity, the 2011-2014 is different from the 2007-2010. This must be the newer version, since there’s no drum e-brake or goofy Torx hub retaining bots.
Portion removing the hub at 3:23 you'd be pounding that until it was simply putty for something in a rust belt and still not have removed it without heat, oxy acetylene torch. 2012 Ford Edge left rear just did.
Doing this job on a 2013 Edge today. Thanks for the well narrated and perfectly detailed video. You have a new sub.
it doesn't get any better then this......Excellent jobs
BROKE THE TORX BIT. GREAT JOB TWO THUMBS UP.
Saw that too then I found your comment.
If you're using impact it's just a matter of time.
Busted! I see what you did to your torx socket when you tightened the rotor mounting bolt.😉🤫
What he do?
ha yeah...i noticed that too...i never use an impact on those ...and i never use a hollow security style bit either...they break too easily 👍
I read one of those bolts behind the hub is almost impossible to get without a special torx tool. Some of them have torx fasteners instead of the 15 mm bolt.. Is that correct? EDIT this must be later version. There's no tone ring on the axle either.
Thanks so much. Very detailed and helpful.
Excellent video and thank you for posting! Would you happen to know if this Ford Edge is the same has a 2013 Lincoln MKX AWD when it comes to performing the same job?
Thanks man. Video helped me out. Broke your torx bit huh. Lol
Nice camerawork. Thanks!
Great video... Thanks for sharing...
This was a big help. Im doing the front passenger side.
+Davarus Branigan Thanks for watching our video! 1aau.to/m/Shop-TRQ
Great video. Can you guys do a video on how to adjust the doors (driver and passenger side doors) for 2011 Ford Edge
Thanks was a big help.
Thank you for the guidance..
Yeah great job you made the extraction look easy
Thanks for the video 👍🏼
Perfect video 👍
great video - thanks
Well done 😁👍
Is this the same process for the front wheel bearings on the 2015 Edge? It would appear so.
something had to give, running that little torx in and out with the high powered air impact, do that one by hand people. you can see he snaps the bit off in the head of the bolt putting it back in.
+Carson Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
Me to blew it right up!
Ummm yeah I think they realized that
Can you list all of the tools required?
hi would this be the same for a 2015 edge Thanks
Are the wheel hub and bearing assembly the same for all 4 tires?
+Griffen Weber Thanks for watching! The bearings assemblies are not interchangeable from front to back on this vehicle.
Is this the same on a Ford Kuga?
some video's show that the bearing bolts are a T60 torx head, these require a BMW flywheel /ford edge wheel bearing tool. Is that for ABS only?
The t60 version is for fwd this video shows an awd
@@dbo52 mines an all wheel drive and I have to use the t60 torx.
@@stevematthews9724 mine is awd, 2008. Mine came out with t55. Positive about this
My 2007 awd also uses the T60 special tool.
My 2011 edge has abs ring on cv shaft, right in the way of the bolts??? Now what???
Ford 4WD Edges have some bad designs as PTU DRIVE TRAIN goes can't change the fluid on them unless u drill and tap drain and fill holes...they say it's not serviceable but it fails when the fluid goes bad and tears up the unit
258 ft./lbs sounds crazy high
You make it look so damn easy
+Dylan Hutchinson Thanks for watching our video! 1aau.to/m/Shop-TRQ
Is the Edge going to be the same as a 2013 Flex?
+Clifford Brammer The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
Same goes for 2007 Lincoln MKX right?
Yes
Watching this for my 11 mkx since ah wheel fell off
Straight snapped that torx bit off.
Where's the parking brake? Mine is getting caught on the brake rotor and I can't get it off, but it looks like this 2007 Ford Edge doesn't have one
Mine wasn't the same the bolts are hard to get too
6:39 Doh!!!!!!
anybody on youtube know how to to replace a wheel bearing on a 2013 ford escape
Thank you this is a very good video to get the job done....
Thats what I need a bigger F-in hammer!!!