Gavin - Ultimate Reloader | interview #21
Vložit
- čas přidán 9. 01. 2022
- Visit Gavin's website.
UltimateReloader.com
Jack Neary Interview:
• Jack Neary | Benchrest...
Visit my website for hardware and software that will help you achieve your competitive goals.
www.ShootSmallGroups.com
Thanks Erik for the opportunity to talk with you!
Two of my best CZcamsrs - Bam! It's great hearing how all this begin and where it's going. I wish both of you all the luck. For Gavin - go back to using the cheap presses to demonstrate consistency, low SD and ES. Because, I would argue, most of your viewer love to see the new Gucci stuff on your channel but, resolve to the much cheaper presses that they have. My two cents.
Gavin,
A recommendation on your three wire method would be to get a changeable anvil screw thread micrometer(which measures pitch diameter). Three wire method is really only necessary on very tight pitch diameter tolerances like thread plug gauges.
You can also document the approximate thread depth from the major diameter with given nose radii on the threading tool and the thread pitch(this works best with ground threading inserts).
Gavin should have 1 million subs on his channel and it's bullshit that he doesn't. He provides so much info to the world and he should be rewarded for it
Thank you Joe :)
Great interview! I've been reloading for 50 years and I'm still learning new techniques. Keep the video's coming, they are most appreciated!
It's watching videos like this that ALWAYS gives me hope. There is literally no perfect and it's gentlemen like these guys that gives me that drive to listen, watch and learn. I absolutely love the passion of reloading and shooting, but these cats are on such a different level I am in awe of their nerdiness (yeah I just made up that word)
Thank you gentlemen for this interview! You are both tremendous assets to the community.
“I need a creative outlet so… I bought a 44 Magnum” - YEAH!!! 😀😀😀
I can't believe I just found this channel... I had no clue you made this one but I've found it now and loving the content brother!!!
Erik, Absolutely loved the Let’s Go Brandon.
Keep it up, God bless America.
Thanks for having Gavin on with you. I have watched his videos for years and learned quite a bit.
Well the interviews get more interesting! I have learned alot watching you two. Thanks Erik!
Loved it. My new favorite channel for hours of brass prep, best background possible!
Great interview with Gavin. Looking forward to his upcoming projects.
I love listening to the types of conversations. Both of yall have been doing some and I hope you keep it up!
Great show.. my two favorite utube platform in one show.. thank u both
Erik you are the pinnacle of info, gavin your in there also
Awesome adventure Gavin! I'm glad it is working out for you and your family.
It’s fun to see you guys get your OCD on together- both of your attention to detail is the key to your success
I have enjoyed all these so far, listening to you guys jawing about all this fired me up! Great podcast!
Time for Gavin to build Eric an awesome precision rifle . Great interview fellas.
two of the greatest guys right here...... love this vid
Thanks for sharing these videos. If folks would try to learn rather than find something to criticize, we could further the sport. You can’t learn this from books alone. Priceless!
FANTASTIC REVIEW. The E C Tuner/Brake allows the shooter to get that last bit accuracy out of the system.
WISDOM!!! Thanks for sharing.
Great to see y’all get together! I love watching both of you throughout the week. Hey Erik, please do a video on your website, how it works, and some site navigation. Thanks!
Awesome to see the Collaborations!!! Keep it going
More to come!
More of this please!! So much knowledge being shared
Enjoyed that. Two of the individuals that I follow closely.
I follow these two all the time................................ nice little chit-chat .....thanks !!
Looking forward to what's possible with the mark II version of the tuner brake. Great content as always.👍
That was a good one, Thanks Guys
We do need a great rifle builder in Washington. Excited to see you open shop.
Another great interview Erik! I think it would be cool to see you and Gavin do something together. Not shooting but gunsmithing or lathe work.
Great content! I look forward to seeing more between you two. Unfortunately, some of the alternative platforms just aren't mainstream and well known. At least not enough to make them viable. In the meantime, I hope you keep getting the information out there, as much as possible.
Great interview. CZcams will go away or will be deeply modified. One way or another both of you will be able to video and show whatever you want.
Gavin mentions the tech/gear overload at a PRS match - When you're carrying >$20k on your back and your personal support trailer has what you couldn't carry - HOLY COW - being competitive feels like a pipe dream if you're just getting into the sport and it's easy to assume that if you keep showing up you might as well make a name tag that read "Hi my name is ___ , I'm a masochist." A strong club and community is everything to help get through that overwhelming feeling.
Great interview.
I really enjoy your interviews. I always learn a lot and have a few laughs at the same time. I think I am getting sucked into the vortex.
Great stuff 👍🏻👍🏻
Looking forward to seeing Gavins new lathe bells and whistles
thank you.
Great choice, Sir.
Erik's comments about recognizing barrels that don't shoot hits hard. I'm 1.600 rounds into trying to get a custom Bartlein .308 barrel to shoot. I had 1 miracle group during load development that kept me chasing but I should've pulled this barrel off right away and sent it back. This would've saved me a ton of time, money, and I've doubt of my ability lol
Eric,
A lot of gauge pins are center-less ground, which if not done correctly will produce out of round shapes. Internal material stresses can also change during the grinding process making the pins not straight.
I hope you have real success gavin
I quote that stuck in my head from the ATF agent that did my FFL interview..."We are here to keep you in business so don't hesitate to call us with any questions." He then proceeded to give me his cell number saying that this was the best way to get a hold of him.
Thanks I love it
Great video. Two of my channels.
New parts mean never ever worked before. New. Not saying they’re broken or bad. They have just never worked before. I always thought that was good to keep in mind.
Have any of yall used one of those 36' Structured barrels in dasher or 6x47 , or Gt, ?
💯💯💯💯🎯 excellent Gentleman 😎👣👍
Best part of this video? Nobody spitting chew on screen!
I'd love to have one of your tuners that works with a suppressor. Maybe a future project?
Hey Gavin, im a fan of your youtube channel. I bought a krieger blank about 3 yrs ago and after I saw this interview, I thought why not ask Gavin if he wouldnt mind chambering and gunsmithing this blank for my cz-455? Would you be interested?
What is the best/easiest way to ensure all bolt lugs are engaging? Figured this was a good spot to ask that question. Also, I love these interviews/podcasts. Very informative and interesting to listen to. Keep up the good work
He said in the interview that he lapped the lugs.
@@BelieveTheTarget Have to grab some lapping compound soon. 3rd lug on my .308 rifle isn't fully engaged/camming all the way.
Cool video enjoy both channels so when is Brian litz getting interviewed?
I love this stuff great content, keep them coming (would love some more speedy)
😎🎯👍
The biggest take away from both you two "IS" I have never seen a calibration cert on any of your tools... ? How do you know it is "NOT BROKEN" ? Torque wrench? Dial Indicator? etc-etc.
Hello to Erik and gavin
Black powder shooters load every shot and a chunk Gun that weighs 40 lbs. the Bullet it 3 pieces Nose Med. hard Mid body soft lead, nose hard lead, swaged together in a special tool. I have a flintlock named humility off hand 3 touching at 50 yds.
does speedy have a book...
Erik has a plethora of interviews, no?
I live in California, the ln of the dammed. Keep up the good work, however the trajectory needs to be changed. This has been a 50 plus year fight.
Good stuff!
CZcams must've thought you'd get a lot of views. Ads every 3 minutes!
Yes Please! Test the Gay Tiger!
Gavin was an engineer??? Never knew 🤯🤣
HOLY SANTA CLAUS SHIT!
I was wondering if you where going to start building rifles.
Hold up, are you calling Bartlien a hype barrel Gavin?
Tolerance stack
"Let's go Brandon!" Loved it! Great videos, guys!
You guys are expensive to watch on CZcams $$$$$ ;)
Do you mean pimp yourself out to be a shill?
That guy is a waist of my time. He is full of himself.
Booo ! No need for politics in ur reviews . I’m done . “ let’s go trump”