Thank god I purchased this Total Gym over 10 years ago. Since we are sheltered in place in California, the gyms are closed so I'm finally setting it up 10 years later.
@@keshondagause3322 Love it! Can do resistance, circuit training, & cardio. So simple. When not in use, it only takes up a little over 1 square foot of floor space. Hated going to the gym. Can toss in a load of laundry between sets!
Shout out to Total Gym through the Coronavirus 3 days in. Iv had it for about 7 years but I haven't used it in a while I've been at a gym man I'm glad I got it now
I have the Fit Max. I’ve had the glideboard get stuck a couple times doing jump squats, but otherwise it’s great. One question: I keep getting black marks on the rails from the rollers; how do you clean it off? I’ve used soap and water and it only gets part of it off.
I am trying to change the position of my total gym from the slide position( inverted, complete slide) to a upright seat bench I need manual instructions, pictures I think im missing pins can someone help?
I’m a longtime Soloflex user who recently switched to TotalGym. I’m 65 and not as flexible as I once was, and the Soloflex was getting hard to use. No such problems with TotalGym, it is great for seniors.
May I ask how you're liking it? I was looking for a comment that wasn't that old. And yours is only 7 months old. I'm waiting for mine and I'm super excited. :)
@@edyann I like it, I have no problems using it. You just lie down on the TotalGym and do each exercise. As much as I loved my Soloflex, it just got too hard squeezing under the bar. With the TotalGym, you just increase the bench incline to make the exercises harder. But even a “pullup” at max incline is only about 50% of your body weight, so it’s still achievable. I can do maybe one real pullup on a bar, but on TotalGym at max incline, I can do 10-12. The only downside is that I like tracking my progress, and it’s not so linear with TotalGym.
@@razorback9926 Oh, wonderful! Thank you so much for answering. I just got tired of going to the gym with all its germs, haha. So I'm buying my own equipment, about 4 machines in total and this one is one of them. Thanks for the info!
+pam smith Sorry, this comment was filtered as spam for some reason. If you haven't figured it out yet, the ring attaches to a hook under the glideboard.
Please make a new video to ASSEMBLE FULLY the new PLATINUM PLUS Total gym. I would greatly appreciate it. I got it from QVC and it does NOT come fully assembled, hardly far from it. So disappointed. I have a bad back and fibromyalgia and no one to help me.
ok.. we need an updated video for the total gym supreme. I can't get the vertical column to lift. There is a spring loaded pin, but even when i pull it out i cannot get the bar to lift. This is so annoying with these products. There should be a DVD for setting it up,
+pam smith The same concept applies from the XLS to the FIT to any of the QVC models. You pull the pin on the tower, pull up or push down to the desired level and push the tower in at the same time.
Received today. Thank you for this video or I would have had issues. I suppose I can go right into squats and go from there, However, my cables are twisted when attached and unattached. HOW do I untwist them???? Is this something that I can do or was it a factory error? Please advise. Thank you!
I set it up with just a few changes and common sense. I watched the video a couple times, and looked at manual. Took my time about it. I bought a 1400. Before video and manual...I was doubtful, now I think it was fairly easy. Was different from video. No big deal tho.
I got mine used and there’s a problem with the bar. It’s off and can’t seem to fix it. Need to call the phone number for troubleshooting and hopefully they can help me fix it so I can finally use it.
The friggin column won't raise! I have a fit max and I pull on the green handle and try to raise the resistance level, but the thing seems completely stuck and refuses to lift!
Same happened to me, but then I observed more carefully the black metal handle for positioning the height. When at the desired height, rotate that handle down and the mechanism should snap into the holes in the vertical column. *Then* you insert the pin; not sooner.
Well Hello There #totolgymdirect How Are You Doing Today On Thursday !_?_! And I Have A Question Yes We Just Have The #totolgymsetup Machine Equipement So We Need This Help Do You Know Where Does Leg Pulley Accessory Kit Goes Please ? 9/17/20 11:02pm
I wish total gym had an app that tracked things like other body training programs - I don’t want to go to the gym with having a total gym at home but need the direction
I got the total gym for my birthday, and it is still sitting in my basement in several pieces. The manual sucks, and me and my husband, both, tried to put it together and both of us failed. Since it is just sitting there not being used I am thinking I should pack it up and send it back.
Hey Hey Excuse Me #urbanfrugalchick & #elilove I Know How 2 #setuptotalgym I'm Like The Professional 2 #setup Gym It's Pretty Damn Easy for Me In Just Two Day Thursday & Friday, but The Only Problem Is The #pulleyaccessorykit Those !!!!!!!!!_?_!!!!!
Not Simple! The stupid PIN to raise the resistance levels is STUCK! I can not even lift up the Support Column. Geez, do I need to return the entire machine?!?
There are two pins that keep the column in place. One with a yellow knob, and one with a yellow tag (safety pin). Make sure both of them are pulled out! Let me know if that works or not!
This us 2016. Why isn't there a DVD that comes with the Total Gym supreme? I have the other pieces that came with this equipment. It has been 1 week and still have not used the gym. If the instructions in the booklet were clearer, I wouldn't be writing this. I think it's rediculous, I'm wasting time trying to find an updated CZcams video.
+smithp556 Because the same concept applies. We will work on creating an updated video. If you'd like, you can call our customer service hotline and they may be able to assist you through the setup.
I purchased my Total Gym and was apprehensive if I would be able to assemble the little bit that needs it. It only takes reviewing the written material, sorting the attachments (because I am handy person challenged sometimes), I also watched this video. ANYONE who says it's difficult and they can't do it, is an idiot. ANYONE who says it belongs in a scrap yard, is an idiot. If you put on your adult britches and engage that muscle between your ears, you will be fine. HAPPY exercising!! 😎
I don't think mine is that easy to assemble it's the X-Force which is the low cost Costco one will see I've had it in storage for a year or so I have forgotten how to set it up
Bass member that was not nice. He was trying to help you. you don't say something like that when somebody is nice enough to try and get to your problem when he didn't have to. you acted like a mean person. Grow up please and be nice to people. Give them a chance. Bill
just picked up an unused one and so confused by all the parts and cables but this lady makes it look so easy, this is a developing story
Thank goodness for this video! You made it look so easy. I’ve had mine for years and never set it up.
Finally a video that helped me pull this apart, thank you!!! Been trying to get it set up over an hour!!!
Thank god I purchased this Total Gym over 10 years ago. Since we are sheltered in place in California, the gyms are closed so I'm finally setting it up 10 years later.
We moved & getting settled. This is much better than going to the gym, esp. since lockdown.
How do you like it
@@keshondagause3322 Love it! Can do resistance, circuit training, & cardio. So simple. When not in use, it only takes up a little over 1 square foot of floor space. Hated going to the gym. Can toss in a load of laundry between sets!
Same here.
WOW!! Thank you for making this so easy:) " I was getting frustrated until you showed me how to do this!! I can't thank you enough!
You are an asset to this company
The video was helpful. I just got today the totalgym xls and was able to set it up easy. Now let's see how it does on the workouts. Thank you.
Workouts are great. If you are consistent, you will see good results.
Shout out to Total Gym through the Coronavirus 3 days in. Iv had it for about 7 years but I haven't used it in a while I've been at a gym man I'm glad I got it now
IV got one when living with n'y parents , bien that i cant Do kendo cause of cauvid i purchase one
The same here!
Thank you! This video is exactly what I needed!
Thank you. Got it up and running in as long as your video was.
Thank you for your help, greatly explained 🤗
thanks for the post it helped a lot
Thanks for this video. It was lot more easier to follow.
Can’t lift the support column on total gym x force
Bought 1 used, no instructions. Thanks, the video was really alot of help.
I thought I lost a couple of parts, but had to watch the video, and found everything is there.
thank you the book directions were confusing
I have the Fit Max. I’ve had the glideboard get stuck a couple times doing jump squats, but otherwise it’s great.
One question: I keep getting black marks on the rails from the rollers; how do you clean it off? I’ve used soap and water and it only gets part of it off.
Very helpful. Bought a used one and without this video I'd have sold it for scarp metal :-)
agree, its heavy and Iam a senior parts were missing and broke
I am trying to change the position of my total gym from the slide position( inverted, complete slide) to a upright seat bench I need manual instructions, pictures I think im missing pins can someone help?
I am glad i watched it...Now i know where the hook up is for the pullie's for the arms...
Yeah Yeah I Just Find That Out Now #vincentferrigno ?
That living room is huge
Is it the same with the Total Gym Supreme when unboxing and is it fully assembled?
Love the gym! How much is the bicycle part
I’m a longtime Soloflex user who recently switched to TotalGym. I’m 65 and not as flexible as I once was, and the Soloflex was getting hard to use. No such problems with TotalGym, it is great for seniors.
May I ask how you're liking it? I was looking for a comment that wasn't that old. And yours is only 7 months old. I'm waiting for mine and I'm super excited. :)
@@edyann I like it, I have no problems using it. You just lie down on the TotalGym and do each exercise. As much as I loved my Soloflex, it just got too hard squeezing under the bar. With the TotalGym, you just increase the bench incline to make the exercises harder. But even a “pullup” at max incline is only about 50% of your body weight, so it’s still achievable. I can do maybe one real pullup on a bar, but on TotalGym at max incline, I can do 10-12. The only downside is that I like tracking my progress, and it’s not so linear with TotalGym.
@@razorback9926 Oh, wonderful! Thank you so much for answering. I just got tired of going to the gym with all its germs, haha. So I'm buying my own equipment, about 4 machines in total and this one is one of them. Thanks for the info!
when Rosalie says this is an easy set up right from the box..NO.. we need an updated video.
How do I connect the center ring of the cables?
+pam smith Sorry, this comment was filtered as spam for some reason. If you haven't figured it out yet, the ring attaches to a hook under the glideboard.
I
Please make a new video to ASSEMBLE FULLY the new PLATINUM PLUS Total gym. I would greatly appreciate it. I got it from QVC and it does NOT come fully assembled, hardly far from it. So disappointed. I have a bad back and fibromyalgia and no one to help me.
You still need help?
ok.. we need an updated video for the total gym supreme. I can't get the vertical column to lift. There is a spring loaded pin, but even when i pull it out i cannot get the bar to lift. This is so annoying with these products. There should be a DVD for setting it up,
+pam smith The same concept applies from the XLS to the FIT to any of the QVC models. You pull the pin on the tower, pull up or push down to the desired level and push the tower in at the same time.
Enter name of your gym into CZcams search - you'll find a video if this one doesn't help you
Received today. Thank you for this video or I would have had issues. I suppose I can go right into squats and go from there, However, my cables are twisted when attached and unattached. HOW do I untwist them???? Is this something that I can do or was it a factory error? Please advise. Thank you!
You can untwist easily. Unhook at top & reattach
I set it up with just a few changes and common sense. I watched the video a couple times, and looked at manual. Took my time about it. I bought a 1400. Before video and manual...I was doubtful, now I think it was fairly easy. Was different from video. No big deal tho.
I've got a unit from maybe the Chuck Norris days, looks very different from this newer model. I can't lift the support column; it's jammed.
My Guide board came off the track completely and I don’t know how to fix it it’s stuck I cannot move it any suggestions
I got mine used and there’s a problem with the bar. It’s off and can’t seem to fix it. Need to call the phone number for troubleshooting and hopefully they can help me fix it so I can finally use it.
The friggin column won't raise! I have a fit max and I pull on the green handle and try to raise the resistance level, but the thing seems completely stuck and refuses to lift!
Will you add English captions to your 30 second spot?
when I raise the seat to any level the pin doesn't snap in. Is it spring loaded? I just got it did they send me a broke TG? That would be great
Same happened to me, but then I observed more carefully the black metal handle for positioning the height. When at the desired height, rotate that handle down and the mechanism should snap into the holes in the vertical column. *Then* you insert the pin; not sooner.
Must be nice, I can't even get the reistance to move at all
I wish they would make an updated video as the new ones look nothing like this model.
Well Hello There #totolgymdirect How Are You Doing Today On Thursday !_?_!
And I Have A Question Yes We Just Have The #totolgymsetup Machine Equipement So We Need This Help Do You Know Where Does Leg Pulley Accessory Kit Goes Please ?
9/17/20 11:02pm
У меня 38 лет назад ,на лыжной секции этот тренажор был , только деревянный ! Вспомним Лужаева Анатолия Ивановича !
I wish total gym had an app that tracked things like other body training programs - I don’t want to go to the gym with having a total gym at home but need the direction
Check out Total Gym TV! Freshly filmed workouts. tv.totalgymdirect.com
I got the total gym for my birthday, and it is still sitting in my basement in several pieces. The manual sucks, and me and my husband, both, tried to put it together and both of us failed. Since it is just sitting there not being used I am thinking I should pack it up and send it back.
It's not that difficult...
Have you watched the video ?
How do I get it together
My flex cable broke. I bought a new cable one. I have no idea how to put it on.
Is this the same set Up for say the Total Gym x force ???
Hey John, yes, the basic concept is the same.
does NOT NOT NOT NOT come fully assembled.
My wing bar looks nothing like this. And can’t find these pins She talking about. 🤨
We didn't get the wingbares were they separate?
Not did we. Is it a accessory that needs to be purchased separately?
Center support does not lift up. If seems to be stuck between the rails. What can I do?
How did you get it up ? I can't seem to life mine either !
Hey Hey Excuse Me #urbanfrugalchick & #elilove I Know How 2 #setuptotalgym I'm Like The Professional 2 #setup Gym It's Pretty Damn Easy for Me In Just Two Day Thursday & Friday, but The Only Problem Is The #pulleyaccessorykit Those !!!!!!!!!_?_!!!!!
need to position the camera underneath so you can see where you are attaching the pulley.
Not Simple! The stupid PIN to raise the resistance levels is STUCK! I can not even lift up the Support Column. Geez, do I need to return the entire machine?!?
Is this the set up for the Apex G1?
This is the XL or XLS - set up is the same
i can not lift up my support column
Why not?
I can't get mind lifted up either and don't know why. Just got it last Thursday and haven't been able to call or get it total set up. Must be me.
There are two pins that keep the column in place. One with a yellow knob, and one with a yellow tag (safety pin). Make sure both of them are pulled out! Let me know if that works or not!
Cant find video for setup of 1400. Its not the same. Bumner
This us 2016. Why isn't there a DVD that comes with the Total Gym supreme? I have the other pieces that came with this equipment. It has been 1 week and still have not used the gym. If the instructions in the booklet were clearer, I wouldn't be writing this. I think it's rediculous, I'm wasting time trying to find an updated CZcams video.
+smithp556 Because the same concept applies. We will work on creating an updated video. If you'd like, you can call our customer service hotline and they may be able to assist you through the setup.
2018 here.
You can see workouts online at CZcams.
There are DVDs - go to eBay to find them, Got mine with the XL version.
Well no it does not come all assembled and i cant get anyone to help me put it together
I purchased my Total Gym and was apprehensive if I would be able to assemble the little bit that needs it.
It only takes reviewing the written material, sorting the attachments (because I am handy person challenged sometimes), I also watched this video.
ANYONE who says it's difficult and they can't do it, is an idiot.
ANYONE who says it belongs in a scrap yard, is an idiot.
If you put on your adult britches and engage that muscle between your ears, you will be fine.
HAPPY exercising!! 😎
I don't think mine is that easy to assemble it's the X-Force which is the low cost Costco one will see I've had it in storage for a year or so I have forgotten how to set it up
Thank God for the video because the instructions were doo doo water out the box lol
Camera needs to show each step closely....I can't see what she's specifically doing at hidden angles !
it doesnt look easy
Very simple.
Probabbly ont of the most underground estimated machine , for everybody. À very Soft system....
It was standing up and it fell on my foot lol
Total gym fit assembly
czcams.com/video/oo6hanbey50/video.html
Is this the biggest living room ever?
It is not that easy to put together.
I don't think it was easy thank you anyways
I wish i got a bowflex
Yes Yes I 👂🏿About That Very Very Much #frankthornton !!_?_!!
No! Smaller footprint, Can do cardio, circuit training, resistance. Can't be easier.
Quite breathtaking for an older chick!
What ?!!!! She's about late 30's!
@@ladymoon425 Well that's old in football years lol.
@@harrycallahan686 cute!!! Won't even tell you my age!
Come on! Don't be a party pooper! Do you watch Golden Girls, All in the Family reruns?
@@ladymoon425 Omg, right?! He thinks she's old then I'm from the stone age!
It takes five minutes, at most, to set up if you any common sense
thank you! sh@t was pissing me off...like
Total gym setup
ikr lol!!! but it really is
OR READ THE MANUAL THAT CAME WITH IT.
Be nice....don't raise your voice.
I agree - I can do anything because I can read!
your machines look dangerous
grow up!
total gym is garbage. belongs in a scrap yard
+bassmember876 Why do you feel that way?
bassmember876 you are an idiot
Bass member that was not nice. He was trying to help you. you don't say something like that when somebody is nice enough to try and get to your problem when he didn't have to. you acted like a mean person. Grow up please and be nice to people. Give them a chance. Bill