How to change KTM300 Coolant | On Two Wheels

This is a quick guide on how I changed the coolant on my KTM 300.
I had made a bit of a boo-boo while topping up coolant. I mixed colours, which is a no-no! So I decided to do a full flush and put in some fresh engine ice!
Facebook: / ontwowheelsau
CZcams: / @ontwowheels
#howTo #KTM #300 #coolant #change #flush
#ADVBike #adventureRiding #Adventurebike #EnduroRiding #EnduroBike #OnTwoWheelsAU #onTwoWheels #australia #victoria #melbourne

[@ShawnBlais]

FYI The manual says to elevate the front of the bike 30" to properly bleed it

[@isaacwest7451]

So helpful make more videos for KTM300!!

[@Forged721]

Kool mate Thank you for this 👍👍👍

[@peteuncle2935]

I'm wondering if you are still out there kicking it, trying to get it to start? Where was the sparkplug replacement and start video?
You will want to top up coolant after running the bike and letting it cool too.

[@aarongrey557]

Haha note too self. Take the radiator cap off after removing the drain bolt to avoid getting drenched with coolant 😅

[@justinlynn2264]

How’s your bike running? Did the spark plug change get it going again?

[@dmorgan3244]

I think you are supposed to start the bike after filling, with the cap off, to let the air out.

[@stevenbenson6370]

🤣 P r o m o S M!!

[@OnTwoWheels]

Thanks I guess :)