What year is my old Johnson outboard ?
Vložit
- čas přidán 21. 08. 2013
- Easy way to find model year from data plate, every Johnson has a number, like a VIN
~-~~-~~~-~~-~
Please watch: "Beyond the river, Heritage Corridor, Northbridge, MA"
• Northbridge, MA. Beyon...
~-~~-~~~-~~-~ - Zábava
Good information 👍 but I can't find anything for mine . Could you help me if I sent you a picture of the model & serial # please 😁
This chart helps us say i have a johnson number 2TE25 serial 668016 what is the year and hp i know came from wrangle alaska work engine
I have a PJE-18-E, serial# 1398422 and the previous owner says it an 1956 but I can't find that model number anywhere.
Great video! I have a Johnson 25hp. Button on the engine block reads G3233130There are 2 #. On the bracket: 17LR1 and 190353Number on the flywheel is513862. Can you tell me the year model. Thx for your time and any help!
Hey Steve, PM me a pic of the transom data plate. The numbers you mention are casting and serial numbers, but make no sense. Is the motor color original ??
Color tells a lot about model years....
I'll wait for your pics brother.
I have Evinrude Fastwin 18HP and it only has serial number 15034-07152 located on the right side of the column; the dash is long. Have no idea what year it is. Power description at particular RPMs is engraved on front aluminum plate above control knobs
Hello StagArmslower,
Your outboard is a 1961, the 07152 is your serial # 7,152nd one produced in that model production run.
In good original condition, these motors are desirable for fisherman and collectors alike, the fuel tank will have the 2 line system with primer button located on top of the tank. Tanks in good shape are bring $100.00+ dollars today, plus fittings.
Send me a pic of your motor & tank assy to dougs.1ranch@gmail.com
My motor is not pressurized, it has single line; maybe it was changed trough the years. It runs well on single line. I have Johnson pressurized tank also but fuel fitting is larger than single line fitting. It has pin trough the gas fitting. Will send pics, thanks very much
PJE18E serial 1398422 previous owner says it an 1956 or a 1959. Can't find that model number. Not sure what year it is.
I only have a serial number . It's 6902M E13937 . Can you tell the year of my evinrude 6hp
Hi got a Johnson super sea horse giving to me ,model V4AL -14L was wondering if you could tell me the size ,thanks for your time
Hi Randy,
Need "All" the numbers and letters from both lines of the data plate.
Doug@ the "ranch"
That chart tells you ABOUT the year...HD-25 1946-50.....no serial numbers to find THE year.
1981
Very helpful but not for this dummy lol My tag was very faded and I could only get my serial #R8196983 and partly my model # TJ 90 ??? My motor is a Johnson 90 hp any help to find the year would be appreciated Thank You Frank
i have a gale buccanner outboard model # 6D-22b can anyone tell me year and h.p
Hello Albert,
Gale mfg. (division of Outboard Marine Corp. OMC ) produced outboards from 1941 - 1963 only. The Buccaneer models were made from 1950 - 1963.
There is no listing for 6D-22b as you asked for. It could be a 5D-22b, a 5HP motor only built in 1963. I provided you a link for the Gale models made in USA, '41-'63 when OMC ceased production of the brand. Hope this helps you. Doug @ the "ranch".
www.laingsoutboards.com/referencelibrary.html
Hello, I have a Johnson tracker outboard motor. I’m trying to find the year and hp. I believe it’s somewhere between a 1990-1999 and 40-65??? Maybe.. I found a freezer plug on top of motor with what I believed a serial number. g2567520 any idea of what it is.?
Christopher,
email a pic of the transom clamp plate to dougs.1ranch@gmail.com so I can read tag numbers and letter codes.
Doug
lakesideranch, i have a 1962 18hp model number 15036b-09393 what does the B mean?
Hello Ryan!
The last letter, which is used within the factory to designate the model run, of which there are several yearly. For internal auditing only, this letter has no significance to the consumer or mechanic.
Thanx for your question, enjoy your vintage outboard!
Doug@ the "ranch"
Thanks for the response! Have another question for you, do you have an idea what compression should be?
@@rjjones1106 You should expect 90- 110 per cylinder for a healthy engine.
Help, please. Bought an old pontoon boat with a Johnson Tracker 9.9 motor on it. I can read the serial number clearly: G 03266374. The model number is scratched; I can only make out TJ10RE (looks like LL) M. I'm having fuel pump issues and want to order the correct part. Thank you for reading this.
Hey Craig!
TJ10RE(LL)M is not a good model number. But, don't panic we have alternatives. Let's start with what you have.
T=Tracker
J=Johnson
10=HP
R=Rope start (std)
E=Elec start (option)
L=Long shaft (20") for this model [which makes sense because it's used for pontoon and sailboats normally.]
L? is not ever used. So we need to guess at what the damaged letter is I, N, T, R, U, or E. The other letters when damaged wouldn't have verticle marks, right? So O, C,and S are out of the running.
The missing (damaged) letter is the model year designator, for all outboards produced from 1980 thru 1998, and it works for Johnson and Evinrude models. Here's the "secret code"....
Remember it with the word "INTRODUCES"....Easy right? Well, now you need the answer key: I=1, N=2, T=3, R=4, O=5, D=6, U=7, C=8, E=9, S=0 (zero) Here's a decoded EXAMPLE: EI=1991
Still with me? Okay. So now you know how to read the model year code. IF you don't discover your motor is outside of the 1980 thru 1998 timeframe, look at the engine block, find the quarter-sized slug that's present on the casting (silver color) and that will contain the complete model number for the engine, which will allow you to pinpoint the year of manufacture. Hope this helps you. A bright note to close this: Most all Johnson and Evinrude outboards use the same fuel pump for small HP engines. You can obtain a rebuild kit for yours if the pump housing (cast plastic) is in good shape.
You will find parts listings by HP (year isn't important) for a 9.9 or 10 HP motor. Good luck, I'm here if you need more help! Enjoy your day, work safe! Subscribe to my channel as a tip for this help, deal? Thanks Craig....You've got this my friend, your motor will be happy with a new pump or pump kit!
Doug@ the "ranch"
@@lakesideranch: Thanks, Doug. I really appreciate you taking the time to walk me through this.
@@craigphillips7258 Glad to help a fellow boater and outboard mechanic. Hope you're successful with your discovery when you look at your powerhead slug. Take a picture of it for future reference if you ever need parts, it's paramount to getting the correct number when ordering. Enjoy your day Craig and hit me up here if you have any more questions or concerns! Work safe.
Doug@ the "ranch"
I have a Johnson seahorse outboard believe to be 10hp green in color. It doesn't have a stamp on it but serial # is 09663. I have done some research with no results. Could you help out by chance? Thanks in advance.
Decent Citizen If the data plate is missing, where did you get the number from ??
It wasn't a plate, it was stamped directly into back side of the motor.
It doesn't seem to ever have had a data plate attached to it. There are quite a few different numbers and letters stamped into parts of the motor. I'm not sure if this is common in the very old models?
Decent Citizen Yes, individual casting numbers are visible on many parts, they won't help ID the year. Really need data plate info normally on transom clamp. I can tell by the color that motor is from the early 50's most likely.
Look for the plate, it only has 2 lines, model & serial #s, it will positively ID your motor.
@@lakesideranch Obviously you don't know early Johnson. The serial number is on very top plate and also on the casting.
have a 25hp johnson i have aquired with a boat and eller had no idea of the eyar and having problems trying to find out myself.
serial number 03541355 on plate the other numbers read aJ 25 RAERC i can not locate the code anywhere
Any help as tot he year would be appreciated ,the motor is Electric start,but needs new impeller and as said unsure of the year
Know the A stands for Australia where i am ,every time enter comes up racer ??
@talleyrand
J25RAERC is listed as follows:
J=Johnson
25=25HP
RA=Rope start Australia
ER=Electric start option
C=1998
Options for this motor: (may not be present)
RC=Rope start w/Comm CDI Ignition (no points)
Have a great day! Enjoy your motor
Doug@ the "ranch"
CAN'T FIND HOW OLD MY 6HP JOHNSON MOTOR J6RGUD. CAN YOU HELP
**Nick, need 4 more numbers from your motor. Model # is 10 digits long (above serial #) on transom clamp
Doug@ the "ranch"
_Look real hard, Is plate stamped J6RCUD? [J6RGUD is NOT a Johnson model #] [JR6CUD] crosses to 1987 Johnson 6HP outboard. (Probably what you have) Pretty std. model in '87
Doug@ the "ranch"
I have a johnson 15hp the model no is AJ15BAICUD And the serial no is 7353198 but I can't find anything
AJ15BAICUD translates as follows:
A=Australia
J=Johnson
15=Horsepower
BA=Rope start & AC lighting
I=Ficht fuel injection
C=Counter rotation
U=Manual tilt
D=Remote electric
MarineEngines.com will help you
its also a 1998 by the last two numbers of the serial number
Im about to throw a good running 90 to 115 hp right in the trash , cant buy parts for it without the correct model number ..and its gone , someone painted it white , they told me it was a loper motor , but the dealerships cant order nothing without a model number and there not educated any more than i am about old johnson motors , they're just parts pushers ..
I can't find a year of this product - BJ10RERB. Can someone help me? Thanks
Hello Nenad,
Here's your BJ 10 RE RB info.
B=Belgium
J=Johnson
10= 10 HP engine
R=Rope start
E=date code {9}
R=date code {4} = year 1994
B=model run suffix (factory code) N/A
Enjoy your outboard
Doug@ the "ranch"
I have a Johnson model E70 EDC Serial # G1114814 I need carburatores but I don't have enough infor to help me. Call you tell me the year please and thank you.
Hi Sandi,
You will need the cast numbers on the carb(s) to order the correct parts. Also try to provide all the info on the transom data plate (seems like you're missing some numbers here) My listings end with 1969 model year, you can google the complete model # and get more info. Good luck !!
Sandi,
Here's the Model numbers on the E70 Johnson, ( located on the top line of the data plate:)
1974: 70ES74, 70ESL74, or 70ESLR74
1975: 70ES75, 70ESL75
1976: 70EL76
1977: 70EL77
1978: 70EL78
1979: 70EL79
Thanks so much I will look
where is the data plate located?
Data plate is fastened to the side of the transom bracket (where the motor mounts to your boat)
I have a johson 25 hp the model N is FD-21R serial is J2769856 is it a 1969 or what
Hey D.J.
That model number FD-21R crosses to a 20HP Johnson, manf. in 1967
@@lakesideranch ok thanks
@@lakesideranch ok one more question why does it say johnson 25 on the cover if it a 20 hours
@@DjStoenWelcome back! Couple of reasons, 1 the hood (engine cover)could have been changed out. 2. The transom clamp (where you got your numbers from) may have a salvaged plate from another motor, this is common. To accurately verify your motor HP and model year, remove the cover and locate a nickel sized plug in the cylinder area which will have the model # stamped into it. If that # matches your plate number (FD-21R) the powerhead is original.
Good luck with your vintage outboard!
Doug@ the "ranch"
I can't find a year for model BJ25 IRL ESB, serial nr. B 8473001
Hello Michael!
Here's your info. for BJ 25 IRL ESB outboard.
B=Belgium
J=Johnson
25= 25 HP engine
I=Ficht fuel injection
R=Rope start
L=20" long shaft model
E=9 date code - {199}
S=0 date code - {1990}
B=Model run suffix number (factory use only)
Enjoy your outboard.
Doug@ the "ranch"
Not much good for very old motors if you don't know where to FIND the number...
6902M E13937