1. Get PVC pipe 2. put glue on inside of pipe 3. Get a bunch of those weird doughnut shapes foam pads for furniture 4. Place foam pads inside PVC pipe 5. Paint black 6. Duct tape to front of gun
All I can say is, you are very smart for using your yt channel for marketing these products, every time I go to the airsoft field I see one of the Novritsch products somewhere. It is a very good marketing technique.
The loudest part on the ssg -24 is the piston flying forward. You would need to stick foam in the magazine receiver. A suppressor ain't gonna cut the sound that much. Get an Hpa if you want quiet.
If you've actually fired the ssg-24 then you can argue. Without a suppressor, the only noise heard is the piston head, correct, but its not heard through the body at all. Without a suppressor it's near impossible to hear the gun firing when behind it. The suppressor helps a lot for the sound coming out the front. But if you are within a foot of it or are right in front of it - you may hear it.
I find airsoft suppressors stupid on a spring gun. U hear the spring more than the round, same in an aeg u hear the motor. Now on a gas or co2 gun that would work, allows the gas to expand before leaving the barrel reducing the noise.
I would say that in terms of noise, springs are between AEG's and gas. Does it suppress a spring gun? Yeah, will it suppress as well as a gas gun? Nah.
It DOES work very well on a closed shell body replica like my P90 AEG, foam supressor really makes it very quiet, does not for our m4 or scorpion evo as much though
Don't you think the gas would mess up the foam rings, and move them from the force of the gas pushing against the different diamater sizes of rings in side the tube, they are from what I can tell just held in with retention. Thus getting in the path of the BB
I use plastic pot scrubbers cut into rings for my suppressor. I thought I had stumbled onto a genius method of cheap suppression but I was watching a Kicking Mustang video where he mentioned it as well. Works great and they are cheap.
This silencer looks good and I want it! I know there are some stores selling your BB's here in Thailand. Hope your other products will continue to come in too!
Could you do a unsupressed vs supressed shooting video with every gun you have. As long as the supressor fits of cours. I hope you know what I mean. It would be great!
@@EmaleesBoyfriend if u have a gas/co2 gun is another thing, but most people have electric guns and the sound theese guns make doesn’t come from the barrel
@@francobabystore6582 Of course it works bro, you just gotta open up the gearbox and put foam all over the gears. It's gonna be so quiet that you won't hear a thing when pulling the trigger.
Novritsh, you can use foams of diferent densities, you will absorb more frequencys and the change of materials makes de sound vibrate of diferent modes, first start with higer density and then lower density, you'll get all spectrum of frequencys supressed
hey nov sound deadening panels mostly work by having the sound bounce in between the channels back and forth until the sound becomes much weaker and only partly because of the foam used this is why in a lot of outdoor concert type areas you can find these made out of softer polymers the suppressor does this to an effect due to the different sizing of foam but if you spent more time developing the shape it could've been better
AEX sells some that have foam already in the suppressor for about $15-$25 that do the exact same. They have both a small pistol size and a bigger size.
I am a Filipino and i have watch a video of you playing here in the Philippines... So i am gonna subscribe your channel since i like your video any way.. From Philippines..
Matt Ostermeier idk... I would assume not for aeg only because the motors and gear box would be louder than the air coming out... for HPA, it’s just straight air, so I would assume the suppressor*if it’s strong enough for the tanks PSI* would dampen some of the air at the end of the barrel from its structure and material
i actually thougt airsoft guns couldnt be more silenced, so really good job, u defintly impressed me. btw ill probably buy it, tbh mor because it looks cool af XD
Note* doesn't work on aeg and some louder co2 pistols. Aeg sound comes from gearbox, so you need to stick foam to there, it wount work. And co2 slams just the slide which makes the loud noise
Theres literally some out there already made that do the same if not better. That cost much much less (ex. $14.99 & $19.99) one specifically ive used and works great is a "castellan 100mm ccw pistol silencer"
You would be better if you did the "mountains" pattern on the foam inside the silencer as well. This stops the sound from reflecting perfectly off of the "flat" foam surface and distorts it making its amplitude smaller by spreading it in all directions.
So your telling me the noise of a airsoft gun comes from the barrel because I’m pretty sure when the bb is fired from the gun the noise is created from the mechanism fireing the bb and if you notice in the comparison the “silenced” shot sounds a lot like when you hear something in slow motion (things in slow motion are often quieter)
Very nice, will it work on the ssp1 too? That would bei awesome. Is there any info you can give on the realsteel shaft that is listed in the ssg24 shop but not available? Im really interested in that one.
How do you cut the holes in the acoustic foam? Spending $25 for it to be shipped to my house isn’t worth purchasing the foam alone so would rather purchase acoustic foam in bulk and cut it myself like shown as your example
the most effective suppressors are homemade with dense PVC foam tubing, cut down to size to be a tight fit against the suppressor in one monolithic tube instead of foam disks. You can unravel the foam and drill or carve blind holes to increase sound reduction further. Using foam disks emulates how real suppressors work, but for airsoft they do not help
i've been working on a prototype two can stage system with a metal innertube (metal ) with cork filled disks ) and a PVC outer tube filled with foam. Cork absorbs sound and the foam dispenses it. So far I'm hitting 50-60dbs .....pretty impressed but I'm still looking to get in the 30-40 ranges.
I got this a little bit ago and it doesn’t silence aeg’s at all It just adds a ton of length and weight to the front It is way to big for me to want to use it Don’t get this unless you have a spring sniper
So when u get a suppressor do you want to get the opposite thread for example if there’s a 14 negative thread do I want to get a 14 positive suppressor?
I like the suppressor but will it work with my m4. I saw on your web site that it can go on a m4 but then which one should I get. I dont know if I need a adapter and if so what one should I get.
My question is how does it look with an orange tip because I would like one but because of my states law I don’t want it to make my gun look even worse than it already does with it’s orange top
I did exactly the same back in 2016, a guy cut me different size of foam rings via laser and i used the same chamber pattern. first the big chamber then the smaller ones.
i have a air rifle, but unthreaded barrel, do you have supressors to fit to the said barrel, will you ship to sri lanka, what will be the silnecer and shipment cost will be, thanks
Hi, I've got one question, does the shorter barrel in the ssg24 affect the accuracy of the gun? Since it has less distance to accelerate... Because I'm really considering using the "silencer" but I'm concerned bout the extra length on the normal barrel
Link to Product: novritsch.com/product/ssg24-suppressor/
Pls make the scope cheaper and pls and a silencer for the ssp-1
Nice video grüße aus Niederbayern
Nice. Videos love it 😍
NOVRITSCH2 - Second Channel : What happened to the clothes you used to offer in your store?
Kann man Den schalldämpfer auch auf Einer 0,5 joule m4 benutzen?
A cheaper method is to scream whenever you fire the gun.
I always do that when i fart in a public place xd
yeah that’s what I do while rushing I just scream REEEEEEEEEEEEEEEEEEEEE to stay hidden and that no one knows that I’m there
It also works with screaming to drown the sound of Velcro
Yes
That is a method of a God novritsch is not ready for it
Other producers= How it works is a secret no one shall know
Novritch= Here's how you build my suppressor in a step by step guide
And here's the 3d blueprint
@@LolLol-hj3kp yo ass is verry right
now i can finally go stealth with my minigun!
1. Get PVC pipe
2. put glue on inside of pipe
3. Get a bunch of those weird doughnut shapes foam pads for furniture
4. Place foam pads inside PVC pipe
5. Paint black
6. Duct tape to front of gun
Thats *really* illegal...
@@c-dawg2145 Not unless you live in texas where when you can paint over any orange tip when you own it.
or get a metal pipe
Genius
dude this really works! thanks!!!
Thank you so much for creating this! I've been needing a suppressor for my pistol for years.
I already bought this supressor.I'm impressed because it is very silent.Good job NOVRITSCH!
Did you get the adapter in the packet or did you buy the adapter seperately
All I can say is, you are very smart for using your yt channel for marketing these products, every time I go to the airsoft field I see one of the Novritsch products somewhere. It is a very good marketing technique.
The loudest part on the ssg -24 is the piston flying forward. You would need to stick foam in the magazine receiver. A suppressor ain't gonna cut the sound that much. Get an Hpa if you want quiet.
Thank u. I just made that same point
just sorbo inside the cylinder, a few quid for a sheet
you can glue foam on the piston head, a mod i tested 9 years a go. Works really good, you can even combo with silicone+ foam (2 stage)
Jacob Dowdle my tm p90tr bags to differ.... literally the quietest stock aeg with a foam suppressor
If you've actually fired the ssg-24 then you can argue. Without a suppressor, the only noise heard is the piston head, correct, but its not heard through the body at all. Without a suppressor it's near impossible to hear the gun firing when behind it. The suppressor helps a lot for the sound coming out the front. But if you are within a foot of it or are right in front of it - you may hear it.
My cheap supressor has a spring in the middle and two foam disks like yours on each end. It actually works pretty good.
Back at it again with another product.
I find airsoft suppressors stupid on a spring gun. U hear the spring more than the round, same in an aeg u hear the motor. Now on a gas or co2 gun that would work, allows the gas to expand before leaving the barrel reducing the noise.
I would say that in terms of noise, springs are between AEG's and gas.
Does it suppress a spring gun? Yeah, will it suppress as well as a gas gun? Nah.
It DOES work very well on a closed shell body replica like my P90 AEG, foam supressor really makes it very quiet, does not for our m4 or scorpion evo as much though
Yes! Finaly someone normal
Don't you think the gas would mess up the foam rings, and move them from the force of the gas pushing against the different diamater sizes of rings in side the tube, they are from what I can tell just held in with retention. Thus getting in the path of the BB
Bolton Cush no..
Kurzgesagt: deine Produkte sind die besten
I use plastic pot scrubbers cut into rings for my suppressor. I thought I had stumbled onto a genius method of cheap suppression but I was watching a Kicking Mustang video where he mentioned it as well. Works great and they are cheap.
This silencer looks good and I want it! I know there are some stores selling your BB's here in Thailand. Hope your other products will continue to come in too!
1:04 that is simply not true.
It absorbes the sound because of it's structure, not because it's some sort of extra-foam.
FALSE.
BEARS
BEAT
BATTLESTARGALACTICA
its because of both.
It’s because the disrupted particles (sound) gets caught in between the two sheets, this makes it anacoic
Sound is not "particles"
FuMu disrupted particles create sound
Awesome Presentation!! 👏👏 Very detailed and Helpful. I like your design of Supressor👍
That suppressor I bought really works great with my ace tech tracer unit it fits perfectly
How do you combinate a tracer with a suppresor?👀
@@mr.taddel4282 put a tracer in
Could you do a unsupressed vs supressed shooting video with every gun you have. As long as the supressor fits of cours. I hope you know what I mean. It would be great!
preferably with one of the louder guns too, preferably on full auto
It doesnt work with electric guns.
@@francobabystore6582 it does I have one and it works perfectly and also just becuase a gun is full auto semi auto does not mean it’s a electric gun
@@EmaleesBoyfriend if u have a gas/co2 gun is another thing, but most people have electric guns and the sound theese guns make doesn’t come from the barrel
@@francobabystore6582 Of course it works bro, you just gotta open up the gearbox and put foam all over the gears. It's gonna be so quiet that you won't hear a thing when pulling the trigger.
Great job looks great hope to see it in a match soon
Novritsh, you can use foams of diferent densities, you will absorb more frequencys and the change of materials makes de sound vibrate of diferent modes, first start with higer density and then lower density, you'll get all spectrum of frequencys supressed
the sound is absorbed by those matts due the the form of the matt, material also helps but mostly due to form
hey nov sound deadening panels mostly work by having the sound bounce in between the channels back and forth until the sound becomes much weaker and only partly because of the foam used this is why in a lot of outdoor concert type areas you can find these made out of softer polymers the suppressor does this to an effect due to the different sizing of foam but if you spent more time developing the shape it could've been better
AEX sells some that have foam already in the suppressor for about $15-$25 that do the exact same. They have both a small pistol size and a bigger size.
I am a Filipino and i have watch a video of you playing here in the Philippines... So i am gonna subscribe your channel since i like your video any way.. From Philippines..
I'm still 3D printing some silencer buffers. They work pretty well
U can takeout supressor to parts and put the foam in mix big small big small to get even less sound
Why am I Just now seeing this. I wish I would have saw this when I came out. Even if I’m late keep up the great work.
thank you. You can find all the technical infos here: novritsch.com/product/ssg24-suppressor/
Richtig geil dur deine videos bin ich voll interesiert in airsoft
After he shoots the suppressed version i imagine the noveritch logo on the screen with that into noice
Can you test on an AEG or HPA bitte?
Matt Ostermeier
Deutsch ODER Englisch nicht Denglisch bitte.
Danke :DD
Nien NICHT der AEG
Matt Ostermeier german and englisch in 1 sentence lul
I don't think it would work an an AEG
Matt Ostermeier idk... I would assume not for aeg only because the motors and gear box would be louder than the air coming out... for HPA, it’s just straight air, so I would assume the suppressor*if it’s strong enough for the tanks PSI* would dampen some of the air at the end of the barrel from its structure and material
Another good way is if you do use your own foam puta aeg spring inside of it which stops BBs from hitting the foam, just a tip :o
Mein Boi du kommst immer mit denn geilsten Sachen freu mich schon wenn meine Neue Sniper ankommt dann hol ich mir auch denn Schaldämpfer
i actually thougt airsoft guns couldnt be more silenced, so really good job, u defintly impressed me. btw ill probably buy it, tbh mor because it looks cool af XD
I'm really liking the Novritsch product line. Now please make a bullpup rifle and a rifle that can make use of my PTS EPM mags.
The moment you realize that most of the noise from an Airsoft gun comes from the gearbox and piston
He did it again!!!!
Note* doesn't work on aeg and some louder co2 pistols. Aeg sound comes from gearbox, so you need to stick foam to there, it wount work. And co2 slams just the slide which makes the loud noise
The world need’s it!
just placed an order right now! it reached pre order batch #3, better get yours
I was trying to make something like this weeks ago to somewhat make my mosin-nagant weaker so that I could use it in some joule limited games.
Theres literally some out there already made that do the same if not better. That cost much much less (ex. $14.99 & $19.99) one specifically ive used and works great is a "castellan 100mm ccw pistol silencer"
They have/had these at airsoft extreme. So im sure theyre out there somewhere.
Suppressor+AirbrakePiston=parfect
wOw it works. Good job.
Please do a test for this suppressor for an AEG, a gas blowback pistol, and an HPA gun. That would be appreciated
You should make the foam small pyramids exactly like the acoustic foam you held up.
*actually*
When you fire the gun, the air coming out of the barrel makes a noise.
The suppressor helps to stop this,
Not the sound of the piston head
Dayum bro. Picture me impressed.
Echt leiwand, Sau geil
You would be better if you did the "mountains" pattern on the foam inside the silencer as well. This stops the sound from reflecting perfectly off of the "flat" foam surface and distorts it making its amplitude smaller by spreading it in all directions.
Duly noted some suppressed work differently and effectively ranged
Hay alguna posibilidad de que tengamos la opción de ver y/o escuchar el video en español ? Muchas gracias.
The little movement he makes with his right arm 😂😂
You could make a Supressor Cover Design that looks like the M9 Baretta Supressor from Rainbow Six Siege.
For the us warehouse your out of adapter for the pps1 and i think supressor for ssg is also out hopefully it gets a whole new shipment
Woah that's fricking awesome
Ethan Riego de Dios nah just illegal if ur in the US
@@HiddenKaiser_ I'm not I'm in south Africa
Hi NOVRITSCH I have a question will the damper work even on an air rifle for example I have a "crossman dpms sbr"
Now make one for the SSP-1!
yes we need a YUGE one, not baby suppressor
the ssp1 is suppose to be loud lol
Fr
Now we just need a working suppressor for your new pistol
That would be pretty sick
it reminds me curiously that of silverback which came out well before...
🤔 I'm sure he's not "making" these in his garage. Won't be shocked to find out they are in fact Silverback suppressors. Or some other Chinese variety.
So your telling me the noise of a airsoft gun comes from the barrel because I’m pretty sure when the bb is fired from the gun the noise is created from the mechanism fireing the bb and if you notice in the comparison the “silenced” shot sounds a lot like when you hear something in slow motion (things in slow motion are often quieter)
sweet video Mr Nov - but if i wanted to bore some of my own foam - what toolw ould you recommend?
-Rubeer
Very nice, will it work on the ssp1 too? That would bei awesome. Is there any info you can give on the realsteel shaft that is listed in the ssg24 shop but not available? Im really interested in that one.
Ye I wanna know if it would affect the ssp1
I want to see the chrono comparison!
Will you be taking responsibility for the quality control of this product? Especially in lieu of the slew of issues surrounding your pistol.
Thats my dream..to have that's beautiful airgun rifle
how doest this perform on the SSP? are you also developing a suppressor for the SSP?
you should make holsters as well
You can buy a cardboard one
I had the same bolt action sniper rifle as yours
Hi Novritsch, what do you think about an Jeff Cooper scout rifle style of the ssg?
Genius
I’m only here for ATF memes
me too lol
same
Same
-Suppresor!- Suppresor!
Do you have to install the smaller barrel yourself?or do you do it before it is shipped?
idk much about airsoft or science shit so genuine question, does it only work on spring guns like your rifle ir will it work on like co2 pistols?
Hi NOVRITSCH I was wondering if maybe you could look into making some more cadpat stuff on your website.
How do you cut the holes in the acoustic foam? Spending $25 for it to be shipped to my house isn’t worth purchasing the foam alone so would rather purchase acoustic foam in bulk and cut it myself like shown as your example
Waiting for a novritsch osprey-style suppressor
Is it adaptable to other airsoft guns like the semis and full autos or is it only for the SSG 24
Does it effect shooting with gas system or other types? Can you test that please? AND do you got one for your pistol ? :)
the most effective suppressors are homemade with dense PVC foam tubing, cut down to size to be a tight fit against the suppressor in one monolithic tube instead of foam disks. You can unravel the foam and drill or carve blind holes to increase sound reduction further. Using foam disks emulates how real suppressors work, but for airsoft they do not help
i've been working on a prototype two can stage system with a metal innertube (metal ) with cork filled disks ) and a PVC outer tube filled with foam. Cork absorbs sound and the foam dispenses it. So far I'm hitting 50-60dbs .....pretty impressed but I'm still looking to get in the 30-40 ranges.
I really hope this works on an aeg
Problem with AEG is that most of the sound is not the bb leaving the barrel, but the winding of the internals.
I got this a little bit ago and it doesn’t silence aeg’s at all
It just adds a ton of length and weight to the front
It is way to big for me to want to use it
Don’t get this unless you have a spring sniper
Does it really work, I mean isn’t most of the sound from a BB gun coming trough the plastic rather than the nozzle
SSG24 w/ SUPPRESSOR 😎😍😍😍
So when u get a suppressor do you want to get the opposite thread for example if there’s a 14 negative thread do I want to get a 14 positive suppressor?
I like the suppressor but will it work with my m4. I saw on your web site that it can go on a m4 but then which one should I get. I dont know if I need a adapter and if so what one should I get.
you should have a suppressor for sale that suits the ssp1 so it became a stronger "TM mk23 "
This suppressor fits on the arp9
My question is how does it look with an orange tip because I would like one but because of my states law I don’t want it to make my gun look even worse than it already does with it’s orange top
I made one with a Pringles can and some tissues and bubble foil inside lol
It kinda worked btw
Just wanted to ask will you be making a suppressor for the SSP1?
Its the same thread, all you need is a threaded barrel
Does this suppressor come with adaptable ends just in case someone has a slightly larger or smaller barrel in diameter?
I did exactly the same back in 2016, a guy cut me different size of foam rings via laser and i used the same chamber pattern. first the big chamber then the smaller ones.
Fair price 👌
i have a air rifle, but unthreaded barrel, do you have supressors to fit to the said barrel, will you ship to sri lanka, what will be the silnecer and shipment cost will be, thanks
Yes.
this work on AEGs? but dont think so as the motor is the sound
Hi, I've got one question, does the shorter barrel in the ssg24 affect the accuracy of the gun? Since it has less distance to accelerate... Because I'm really considering using the "silencer" but I'm concerned bout the extra length on the normal barrel
a short barrel will always make it less accurate
Make an orange one @NOVRITSCH-VLOGS