Bosch 24V Rotary Hammer Drill Restoration | GBH 24VF
Vložit
- čas přidán 27. 01. 2021
- Bosch 24V Rotary Hammer Drill Restoration Video
Original Battery Pack (Nimh)
20 cells x 1.5V = 30V (Nimh 1.5V fully charged)
New Battery Pack (Lithium)
7 cells x 4.2v = 29.4V (Lithium 4.2V fully charged)
- Capacity 4Ah (In the video 6Ah is not correct)
Battery lithium cell
- Brand Dmegc
- Model INR18650 20P
- Capacity 2000 mAh
- Typical voltage 3.7V
- Internal resistance (1KHz) ≤ 18mΩ
- Standard charge and discharge current 0.5C
- Standard charge and discharge cut-off voltage 4.2V/2.5V
- Maximum continuous charge and discharge current 2C/20A
- Cyclelife ≥ 500 times
- Size 18 * 65 mm
- Weight 45g
BMS 7S30A
- Rated working voltage 30V
- Rated discharge current 30A
- Peak starting current 60A
- Overcharge protection
- Over discharge protection
- Overcurrent protection
- Short circuit protection
- Internal resistance 10 m Ω
- Current consumption 15 μA
- Operating temperature -45°C to 85°C
- Physical dimension L60*W23*T5mm
I hope you find this video useful and enjoy!
I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did this video !!!
** I still keep some parts, I want to help preserve the world environment **
Thank you very much for your likes, comments and subscribe!
Have a nice day
Gear Show - Jak na to + styl
The Ingersoll Rand 114GQC Air Hammer czcams.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
Love these early cordless drill designs. They basically mated a fat battery pack to a regular cord drill chassis. Nice finds at your shop
I think he finds them at a scrap yard but they are very well preserved and I love that
I found it form Japan power tools recycle shop.
@@gear_show Do you live in Japan?
@@danesz021 nah, i think he just flown there to buy a scrapped hammer drill to restore ;) :)
Querido Angel usted es un hombre muy virtuoso e inteligente y le agradezco mucho tanta ayuda y enseñanzas que nos brinda muchas gracias de todo corazón
What a beautiful job and results, congratulations. I will never do this job but I enjoyed it as you have no idea, I have seen the video completely and the Makita drill conversion from wired to 18V thank you from Queretaro Mexico.
Your battery pack rebuilds are the best👌
Ya mind blowing
This one was fairly easy to pull out since it had the parts to be removed, and I love that in such battery powers Tools, it's easy to replace batteries from the core
Thank you very much!
@@freemanontheland24 ฟฟฟฟฟฟฟฟฟฟฟฟฟฟี . ่.อ้อี เธอฮา
ល
Good work! Nice to see professional man's job🙂
Otra estupenda restauración de taladro percutor rotatorio Bosch 24V | GBH 24VF, mis respetos y saludos desde Venezuela.👍💯👍👊🤘
Muchas gracias, me alegro mucho que este video aparezca en Veneuela
Комментарий в поддержку канала и ролика, а также труда мастера который отреставрировал отбойный молоток.
잠자기에 딱 좋은소리👍 백색소리👍
Hermano de @Gear Show una véz más realizastes excelente trabajo... Te Felicito, la Herramienta quedó mejor que original de fábrica. Fuerte Abrazo y Saludos desde Venezuela!!!
Un profesional trabajando ⚒
Saludos desde Costa Rica 🇨🇷
Your Hammer Drill Rebuilds Are Amazing!!
Amazing restoration ! - Well done - Great outcome ! :)
5
im impressed that you can connect all parts at the end,Nice
Amazing, it took me 2 days to renovate and then replace the batteries the batteries in my 35 year old Bosch hammer drill yet it only took you 22 minutes.....Well done.
Raj
Subscribed. My favorite toll rebuilt channel on CZcams.
Отличная работа!
Some really do have a lot of time and patience. One not one of them but I do enjoy watching these videos.
Glad you like them!
Another fantastic restoration and camera work. The hammer drill battery rebuild is awesome also. You should have Sky make a brief appearance in more videos. The general public love that stuff and me too. Doug & Skye USA
Q2⅔e³⁴⁵⁶⁷⁸⁹⁰
P
I like the way another drill "repairs" another drill throughout the restoration
Wonderful restoration of a mammoth Bosch SDS Drill.
Yes, thank you
waoo mantap model ini yg kusuka,
Bosch brand it’s very strong I like it
Good job 👍🏻
Great patience, great work! Well done! 🔥
Yes, thanks
1:03, opens battery pack, finds spider nest. "There's your Problem!"
Yes, it is haha...
Thanks 👍👍
شكرا لكم اخي دائما مميز
You're welcome!
you guys engineer man👍💯 points
Finally I know how the hammer thing works
2:17 В идеале.
Perfect
Yes, just replace carbon brushes
@@gear_show Excuse me, are you from Japan? I am glad that your videos are watched in my homeland (I am from Ukraine). I just want to note that accelerated video material spoils the atmosphere a bit, but I am glad that you bought a 60-frame camera, or finally decided to record material at 60 fps. It should also be noted that on the packaging of lithium-ion batteries your channel is the top. I personally watch you along with my mechanics and TysyTube Restoration. Thank you for your efforts, as we say in Ukraine
"гарно є" :D
Esse cara e fantástico parabens
Gran trabajo !!
Красава мужик- cool man
I have a question for you.
Where can I buy a bearing kit both types with the carch inner and outer of the bearing
Nicely done 👍👍👍Thanks for sharing
Thanks for watching
PPE is very importat! nice to see!!! Love your videos!
Yes! Thank you!
Meraviglioso lavoro
Grazie!
Small tool, big power. So relaxing to watch Your videos!
I'm a professional electromechanical repairman ... not necessarily a very advanced one ... but I like to upgrade like this too ... I bought a bosch Jigsaw 24v with nicdm batteries and I tested it to see if it supports 36v batteries li ion from bosch .... total success ... I managed to change the tool housing and the battery slides and connects like 36v tools .... the coupling was successful and from the outside you almost don't realize that it is not so provided by the factory even as the size in length fits incredibly .... operation ??? impeccable ... I have been using it for some time, there is no sign of overload or due effects of the larger battery ... or stress of any kind
in this conversion there is also the advantage
that I use the original charger for 36 v batteries because I did not use the tool battery ...
the effort was especially worth it because there are some tools from the old generation that are higher in quality than those from the new generation
bosch Jigsaw 36v are few tools to compete with this
I have to somehow make a movie with him and put on yotube
yes, please make a video and publish it on youtube
Excellent restoration bonus with battery upgrade better than factory.
Thank you! Glad you like them
I'm sure that your favorite toy was the puzzle :)
Great technique ☝️👍👍👍
Thank you!
Looks like 2000mAh cells, but it doesn't matter. Try to make double nickel strip between all series. Now between 5-6 and 6-7 is a single strip. Anyway, top quality video as usual, pleasure to watch.
great job bro you perfect
That was excellent thanks for that video keep them coming
Awesome video as always. Greetings from the UK.
Saving the planet one battery powered tool at a time. Great job!
Yes, thank you very much :) You're always watch my video.
What is the brand and model of the tailstock machine you use? In what settings are you using it? Also, where do you get 18650 batteries, adhesive labels and metal strips? Do these have links?
It will work for many years again. 👍
best Restoration ever
Hermano,que buenos videos quisiera tener tu habilidad.
Tohare paas sb suvidha baay bhaiya.......mauj kra....,,🥰
думал новая модель перфа у Бош, гляну обзорчик :D
СПАСИБО ЗА ВИДЕО!!!
ПОЖАЛУЙСТА
Where can i find the cap u use to load the battery? I need on for a 18V
Good work..!
Просто круто 👍👍👍👍👍
Thank you for the video. Where do you find lots of used power tools? Any auction?
Thank you for the video! Nice video and great job. Can you advise which 18650 battery from which manufacturer, that is, the company, is it best to buy on aliexpress? A link to a product or store is optional. It's just that the choice of brands is very large, and I'm not experienced in this. I just know that you can't buy more than 3400 mAh.
This „Made in Germany“ hammer drill is a beast. Great to it in future times.
It sure is!
@@gear_show if you can convert it to brushless it would be even better
Excellent review. Thanks.
Very welcome!
Best drill I ever owned!!!!
Where do you go for the printed case labels, or do you recreate them? The commutator ring looks very worn, that might stop me proceeding.
One benefit of more modern unuts is more powerful Brushless motors & LiPo batteries. In combination they utterly transformed cordless tools.
Where did you get your ultrasonic cleaner? It looks good quality & very effective.
Great work!
Thank you!
Cool stuff 👍
Thanks for the visit
my favorite repair channel. i learned a lot from you! thank you!
can i ask what camera and microphone do you use to film this? very nice quality, especially the more detailed shots!
Love your videos, I want to know what bit set that is you use with the makita screwdriver
4:25 best part of any restoration
Fantastic
Simple smart restoration
Glad you like it!
great effort
Wowwwwww sir amazing
Thank you!
You are true professional,amazing good job.
Thank you so much 😀
What was the machine and it's purpose that you placed the gas mixture into? I believe the brand was Fuyama.
I thought this channel couldn't get better, but then you added funny slow motion. Keep up the awesome work!
What do you do with the tools you fix? Do you sell them or keep them?
I have a black & decker power drill/ screw driver but the battery was dead. The whole set was bought ten years ago which is around usd60 with 2 battery packs bundled. Used a couple of times only and looks brand new. I asked the shop and they do not have a replacement battery pack. Then I found that buying 10 pieces of 1.2v NiMH cell may cost more than usd60.
Quá hay anh ơi!
its perfect👌🏼
Amazing 👍
Very nice Thanks you so much
Hi I been watching your video very helpful how you converting old battery pack to new Lithium I just check you have used 3.7 * 14 battery in this one and in description shows that 7 cells. which one is correct please reply, i have few old 2 makita 14.4, two another make which is 12 v and one i have 24 v to convert to lithium pack any suggestion please reply.
أحسنت صنعنآ 👏👏👍👍
Thank you!
15:56
Nice sissors.
Also thanks for the information in the description and I hope you mention the prices for the parts you used in this video.
what is the difference between cleaning and this restoration?
You know if you can use car Paint scratch and scuff remover to make the plastic look new, removing minor scratches and restoring the colour!
Amazing !!just what I was looking for ,for many years!!!Can I re-use the original charger?
Hi can this drill with an adaptor + soil drill bit turn into a soil digger? Thank you
Best rotary hammers out there are Bosch.
2:16 , that would make an excellent poster! Or wallpaper background.
Wow, I'm happy to hear that, thank you!
Well the video is in 1080p. You can just take a screenshot.
@@KISSFanDan1995 I may just, but a poster would be a real prize.
@@jdniedner that’d be awesome too.
Subscribed. Thanks bro.
7:13 Красиво.
This show after painting. I skip painting process.
that is the new Bosch machine u get on Amazon then. ahah. Good work.
Thank you, it isn't new you can see the carbon brushes.
My favorite part is the plastic parts cleaning
Oh, really! I think that part is not important.
great job
Great job
👍👏 молоток
Hey man which bms are you using in this video , can you suggest the name.
the internals of the drill are in very good shape
very very good tech~
Yeah new video
Yes
spectacular 🇹🇷