HILTI TE 2-A 24V Rotary Hammer Restoration | Replace lithium battery
Vložit
- čas přidán 23. 05. 2024
- Hilti te 2-a 24V lightweight cordless hammer
The case is broken and the dust cap is missing. Only the battery box has no cells.
It was completely disassembled and cleaned, the front and rear bearings of the rotor were replaced, and the casing was repaired and reinforced.
The battery part uses 18650 lithium cells, two in parallel and seven in series, with a maximum voltage of 29.4V.
After repair, the function is intact and the power is strong. - Jak na to + styl
Amazing restoration. Keep up the great work 👏👏
Надо было покрасить, так бы вообще как новый был )
Вы большой молодец 👏
Tengo uno igual, con el mismo problema. Por dentro le he puesto fibra de vidrio con resina. Veremos que tal resulta. Buen vídeo.
Que buena reparacion 👍
Buen video
Parabéns pelo trabalho, poderia compartilhar o link dessas baterias utilizadas. obrigado
Muy buena restauración!
very good video
Amazing work but I wish you could explain some of the more advanced things you do in your vids.
Esa bateria cargada al 100% tiene 29,2V, pero bueno, mas fuerza tiene. Buen trabajo.
Hola, la original cuando está cargada tiene también esa tensión. Aunque las celdas son de 1,2v cargadas están sobre 1,4 a 1,5v.
amazing
Good amazing
amazing Good ❤
Can sanitary sealing rings be used? Or do I need to buy rubber gaskets (rings) specifically for the tool?
The sealing ring is special, and the general material may not be wear-resistant enough
Sanitary sealing rings are not oil resistant. You should use nitrile or silicon O-rings.
I've watched your past videos. You wrote in the comments that you are buying batteries on taobao.
Please provide a link to the original Sony Murata VTC 6 18650.
I beg you very much. Thank you.
The Yiwei batteries I used recently were purchased on Pinduoduo, and the disassembled Sony batteries were purchased on Xianyu, a second-hand trading platform under Alibaba. If you are not in China, these apps may not be convenient to use.
Theo tôi bạn không cần thay đổi các vòng bi.
Indeed, the internal wear of this machine is very small👍🏻👍🏻
I beg you very much!
What kind of thick oil do you use. I see two types of them. One yellow. Another brown one at 15:03 What are they called?
Please
I used two kinds of oil, one is ordinary grease, I used SKF LGMT2, and the other yellow one is special oil for electric hammer cylinder, which is thinner.
老吊都开始玩喜大爷了
😂
@@RefurbishmentKJ 热熔胶不会化么 那玩意温度稍微高点就化了