Fitting the REVCAMUK Ducato / Boxer / Relay Brake Light Reversing Camera

Sdílet
Vložit
  • čas přidán 27. 06. 2023
  • A video to guide through the process of transplanting your existing light strip from the brake light of your van in to the new twin view brake light camera. This will give you both a wide angle parking camera, and a narrower angle always on driving camera.
    Camera by itself :
    www.parkingcameras.com/store/...
    Camera as a kit with 7 inch rear view mirror monitor :
    www.parkingcameras.com/store/...
    Camera as a kit with 5 inch dash monitor :
    www.parkingcameras.com/store/...
    Camera as a kit with 7 inch dash monitor :
    www.parkingcameras.com/store/...

Komentáře • 5

  • @superkingpaco
    @superkingpaco Před 5 měsíci

    How did you get the brake light off the van is what I want to know? 😄 struggling to get mine off haha.

    • @revcamuk9861
      @revcamuk9861  Před 5 měsíci +1

      Hi, usually it is as simple as undoing the two screws on the outside of the vehicle and the brake light comes off. If it seems stuck after doing this then my guess would be that someone has applied extra silicon sealant around the brake light (possibly when they have changed it in the past).

    • @superkingpaco
      @superkingpaco Před 5 měsíci

      @@revcamuk9861 thank you mate. Do you guys do the brake light cameras for older vehicles before 2006 at all?

    • @revcamuk9861
      @revcamuk9861  Před 5 měsíci +1

      Unfortunately not. I haven't seen one anywhere, and I've searched over the years. The factories tend to only produce them when they believe they will sell enough to make it worth their while. The Mark 7 Transit took many years before they produced one for that, despite the fact that the Mark 8 was catered for straight away. @@superkingpaco

    • @superkingpaco
      @superkingpaco Před 5 měsíci

      @@revcamuk9861 ah thank you for that. I will need to keep searching 😩😄