Red Oxide primer found ! Prepping the Camaro floor pan for install .

Restoration of the 68 Camaro convertible Big Block car Prepping the floor pan and trunk pan . #Camaro #firstgencamaros #barnfind #restoration

[@MrFireman164]

So just some friendly advice on spi epoxy, I have been using it for years, and have had some issues because of improper air pressure and applying to heavy per coat, my suggestion is to spray with hplv gun at 29 psi or higher and apply the first coat light and second and 3rd medium wet with plenty of flash time in between, if not it will solvent pop and look like mini craters on the moon. If this happens it’s fine but doesn’t look as good, the performance is the same, but if you top coat it with craters you will obviously have craters in your top coat, build primer might fill them but If not glazing putty will need to be used.

[@c1run1]

That is good to know Thanks : )