Brings back memories. I bought one new in 1974. Without a good battery mind would burn headlight out. It was a strong bike. I miss it. Thanks for video, watching it on Sunday before memorial day 2024.
That’s awesome, thanks for sharing and thanks for watching! I love that these videos are stirring up memories for the guys that got to enjoy them when they were new. These are like time machines for me I always say!
I recalling drooling over that bike at my local Yamaha dealer back in the day. I loved that green color. They had a little less power than the older DT360 but more than the DT400. Great bikes!
Oh I didn’t know they had more juice than the DT400! Sweet! More motivation to dig into the carb and see why it’s blubbering above half throttle…I have a couple ideas of what it can be.
Beautiful job. Good feeling of satisfaction stripping a bike down to it's frame, refurbishing it and then reassembling it better than it was. Saved another one.
Good job, I really like it. I have one that runs but is rough, looks like the headlight bucket saw a tree up close, right peg mount gone and some junk welded in its place, I have a 1100 original mi 76 400 and a running complete high mi 75 400 , also pretty nice 75 175 about 1300 mi and a completely disassembled 76 250, may have to use it's frame and headlight for the 360 after see yours 😅😅
Thanks! After I got this one printed up and seeing how nothing is bashed in, I have to keep this one! Problem is I want to keep all my other DTs too lol. Need more space!
Dude, I think that I owned that bike. I remember the kickstand breaking off and the poor welding repairs. Had tons of fun on it and sold it in 1977 to buy a new DT 400D. Thanks for the trip down memory lane
Did you happen to paint the bike yellow or have to repair the case where the chain hit around the sprocket by any chance? That would be crazy if it was yours! Thanks for watching 👍
Another outstanding executed job and I congratulate you for the outcome, this Yamaha looks amazing and the bike has a great sound of the two stroke,any minor adjustment without doubt you will get perfectly well. Perhaps dropping 4 ounces of marvel mystery oil will do good to lubricate the piston & rings. Next tankful of gas maybe 4 ounces of Chevron Techron…
Nice job that you got done. If I may suggest running some premium gas with 4 ounces of Chevron Techron after any other carb adjustment. Once in a while with fuel using a little bit of marvel mystery oil in the full tank of fuel. Congratulations for another very well done great job.
Awesome! I just also recently redid the top end on a 2002 XR200 that I picked up last winter after the previous owner said it dropped a valve. Just sold it before heading to mid Ohio to make room for more projects. I’m always looking for a 79 RM80 to redo. That was my first bike in 1993 when I was 13.
@@Garage2Trail Yes! It has good bones. Kind of a good from far, but far from good type of bike. Needs some things, but I've already made a ton of progress rebuilding the forks. Tank has some rust in it and needs a new throttle/oil cable. This is a great video series to reference the wiring routing so much thanks! I'll be heading to Mid-Ohio this month looking for some small parts.
@@JEMadaras awesome! I’ll be there too! I also need to get a new throttle/oil pump cable. There are new reproduction ones online that I might get if I can’t find any at mid Ohio. Might be bette to just get new ones anyway.
@@Garage2Trail I saw you rolling around the swap on your 250. Very cool bike! Did you get this carb issue resolved and find your rear turn signals? I'm looking for those rear brackets for the turn signals. I'll be putting together the bike this week as I'll have all my parts. Probably will post up a video on the FB group.
That looks and sounds amazing .👍 really well done a superb resto to ride job done here !!! The green really suits the Yamaha and decals look great .a great rebuild series hopefully more to come .😁👍 a good bike to add to your collection of you selling it on ? Keep up the great work really enjoy your videos .👍
Had a 1978 DT100 brand new in 1979. I was 12 and the sounds bring back memories. The pitch was higher but similar idea, these didn't have power bands like the YZs did. Any street legal 2 stroke is awesome IMO.
That’s great! I really fell in love with these DTs over the last couple years and they are right up there with my other favorite bikes (XR’s and XL’s) now. Check out some of the other ones I’ve done on my channel if you get time. I just got a 1975 DT125 going and the video for part 2 will be out tomorrow afternoon. Part 1 is up now so you can see the shape that poor bike was in.
Awesome job! Looks and runs great! The 74 model is the only year that has the larger rear sprocket same as the DT3 . All 360 and 400s have the smaller sprockets. Just a tidbit 😂 thanks Mike
Thanks! I appreciate any info I can get on these bikes. I still have a lot to learn. In fact, I just filmed myself riding that bike after getting the jetting sorted so look for that soon!
Wow that paint color looks even better outside 🤩 running great maybe a little rich but overall awesome! PS love the cars , is that a 73 satellite wow!!!
@@Garage2Trail clutch cable, tires and the forks need to be rebuilt. I put the carburetor back on yesterday after rebuilding it. would you be interested in in doing a rebuild video on this bike for me?
Brings back memories. I bought one new in 1974. Without a good battery mind would burn headlight out. It was a strong bike. I miss it. Thanks for video, watching it on Sunday before memorial day 2024.
That’s awesome, thanks for sharing and thanks for watching! I love that these videos are stirring up memories for the guys that got to enjoy them when they were new. These are like time machines for me I always say!
I recalling drooling over that bike at my local Yamaha dealer back in the day. I loved that green color. They had a little less power than the older DT360 but more than the DT400. Great bikes!
Oh I didn’t know they had more juice than the DT400! Sweet! More motivation to dig into the carb and see why it’s blubbering above half throttle…I have a couple ideas of what it can be.
Man that looks great! And sounds great! You should be proud 👏
Thank you Rich! I am very happy with how it turned out!
Beautiful job. Good feeling of satisfaction stripping a bike down to it's frame, refurbishing it and then reassembling it better than it was. Saved another one.
Thank you! It definitely is!
Good job, I really like it. I have one that runs but is rough, looks like the headlight bucket saw a tree up close, right peg mount gone and some junk welded in its place, I have a 1100 original mi 76 400 and a running complete high mi 75 400 , also pretty nice 75 175 about 1300 mi and a completely disassembled 76 250, may have to use it's frame and headlight for the 360 after see yours 😅😅
Thanks! After I got this one printed up and seeing how nothing is bashed in, I have to keep this one! Problem is I want to keep all my other DTs too lol. Need more space!
Dude, I think that I owned that bike. I remember the kickstand breaking off and the poor welding repairs. Had tons of fun on it and sold it in 1977 to buy a new DT 400D. Thanks for the trip down memory lane
Did you happen to paint the bike yellow or have to repair the case where the chain hit around the sprocket by any chance? That would be crazy if it was yours! Thanks for watching 👍
I didn’t paint the bike when I owned it. The kid I sold it to had it stolen from him. Any thing is possible l guess
Just bought one of these that was in really great shape, nice restoration.
Nice, thank you!
That looks like a fun one!
Another outstanding executed job and I congratulate you for the outcome, this Yamaha looks amazing and the bike has a great sound of the two stroke,any minor adjustment without doubt you will get perfectly well. Perhaps dropping 4 ounces of marvel mystery oil will do good to lubricate the piston & rings. Next tankful of gas maybe 4 ounces of Chevron Techron…
Thank you!! Yeah I’ll be premixing it so I’ll make sure it’s at least 32:1 to keep that top end lubed up nicely at all times.
Nice job that you got done. If I may suggest running some premium gas with 4 ounces of Chevron Techron after any other carb adjustment. Once in a while with fuel using a little bit of marvel mystery oil in the full tank of fuel. Congratulations for another very well done great job.
Thank you my friend, I will give that a try!
Awesome bike!
Thanks! It’s one of my favorites of the bunch
Beautiful job! It brings back so many good memories!
Thank you! That’s one one of the best parts about working on these is bringing back and making new memories.
That's the 360 my uncle had back in 79 or 80. Last bike I did was an xr 200. Presently building an rm85.
Keep vds rolling. 👍 👍 👍
Awesome! I just also recently redid the top end on a 2002 XR200 that I picked up last winter after the previous owner said it dropped a valve. Just sold it before heading to mid Ohio to make room for more projects. I’m always looking for a 79 RM80 to redo. That was my first bike in 1993 when I was 13.
My xr is 01. Sounded like a sewing machine when I got it. Runs vg now. Shock also a disaster.
I'll keep on watching !
Awesome Bike, great video keep the Camera rolling and the great videos coming.
Thank you! I appreciate the feedback!
I just picked up the same bike and am in the Pittsburgh area! Well done video!
Thank you! Was the one you got the one that was listed in Wexford by any chance? That thing looked clean!
@@Garage2Trail Yes! It has good bones. Kind of a good from far, but far from good type of bike. Needs some things, but I've already made a ton of progress rebuilding the forks. Tank has some rust in it and needs a new throttle/oil cable. This is a great video series to reference the wiring routing so much thanks! I'll be heading to Mid-Ohio this month looking for some small parts.
@@JEMadaras awesome! I’ll be there too! I also need to get a new throttle/oil pump cable. There are new reproduction ones online that I might get if I can’t find any at mid Ohio. Might be bette to just get new ones anyway.
@@Garage2Trail I saw you rolling around the swap on your 250. Very cool bike! Did you get this carb issue resolved and find your rear turn signals? I'm looking for those rear brackets for the turn signals. I'll be putting together the bike this week as I'll have all my parts. Probably will post up a video on the FB group.
That looks and sounds amazing .👍 really well done a superb resto to ride job done here !!! The green really suits the Yamaha and decals look great .a great rebuild series hopefully more to come .😁👍 a good bike to add to your collection of you selling it on ? Keep up the great work really enjoy your videos .👍
Thank you for the kind words! I’ll probably keep this one a while. It runs so smoothly on the road and oozed torque!
Neat bike and well done!
Thank you, I appreciate that!
Had a 1978 DT100 brand new in 1979. I was 12 and the sounds bring back memories. The pitch was higher but similar idea, these didn't have power bands like the YZs did. Any street legal 2 stroke is awesome IMO.
That’s great! I really fell in love with these DTs over the last couple years and they are right up there with my other favorite bikes (XR’s and XL’s) now. Check out some of the other ones I’ve done on my channel if you get time. I just got a 1975 DT125 going and the video for part 2 will be out tomorrow afternoon. Part 1 is up now so you can see the shape that poor bike was in.
@@Garage2Trail I'd love to buy a decent one some day and drive it on the road.
I found a 150 main jet is perfect on these with stock exhaust and airbox. Power wheelies no prob
Awesome video. Thanks and Let’s Go Pens!
Thank you! Go pens!!
Awesome job! Looks and runs great! The 74 model is the only year that has the larger rear sprocket same as the DT3 . All 360 and 400s have the smaller sprockets. Just a tidbit 😂 thanks Mike
Thanks! I appreciate any info I can get on these bikes. I still have a lot to learn. In fact, I just filmed myself riding that bike after getting the jetting sorted so look for that soon!
@@Garage2Trailreal quick question? Where did you get your battery for the bike? Thanks Mike
@michaelmain8719 no problem Mike! I got that off eBay. Just pop in the battery number in search and there will be a couple that pop up.
Wow that paint color looks even better outside 🤩 running great maybe a little rich but overall awesome! PS love the cars , is that a 73 satellite wow!!!
Thanks Mike! Close…’73 Roadrunner 😀
Where did tyou get your new tires from?
That rear was an unused trials tire I had laying around…the front I didn’t change. It’s just some old knobby.
@@Garage2Trail thanks for the quick reply. any recommendations on where to get tires from? I am working on a 1974 DT250.
@@vwtommy07 no problem! What all does yours need yet?
I always use the Dunlop 803 Trials front/rear tires on my Yamaha Enduro's , closest looking to the OEM tire once you have to replace the originals .
@@Garage2Trail clutch cable, tires and the forks need to be rebuilt. I put the carburetor back on yesterday after rebuilding it. would you be interested in in doing a rebuild video on this bike for me?