How to Remove Body Control Module (BCM) ECU - Audi A4 S4 - B6 B7 - 2001-2008
Vložit
- čas přidán 5. 12. 2017
- This video will show you how to remove the Body Control Module (BCM) on your Audi A4, S4 or RS4 (B6 and B7) 2001-2008.
Looking for tools?
www.totaltechnik.com/selectstore
USEFUL LINKS:
1) How to remove Lower Dash Panel:
• How to Remove Lower Da...
Video by TOTAL TECHNIK. - Auta a dopravní prostředky
Looking for tools?
www.totaltechnik.com/selectstore
Hi a have a s4 b6 2004 a have problems whiff radiator fans test it working good it Das not came on what's the problem with it 😢please
Great video. My CCM went bad on my 2012 S4 and I am searching for a video on how to remove it and came across this one. Sadly its not the application I need but still very informative and easy to follow. Thanks for providing this for folks that need it!
Much appreciated!!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Did you find something for the 2012? I'm looking for the same thing.
By replacing the CCM do you have to do any programming ?
Thank you for this video. My local electrician found a fault in my BCM and wanted £300 + labour to repair it. I'll be fixing it myself after I bought a cheap second hand BCM elsewhere
Great stuff! Always good to hear we're helping people to save money!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
@@bddmedia you need to match the numbers as some have different software or hardware meaning it might be incompatible if you dont also you'll need vcds to check it's coding is set up to the same configuration
Is this the same for the 2008 TT roadster? My two heated seats are off. Fault is Z45 & Z46, open circuit / short with power - intermittent. Thought it could be one of the thermal fuses
Love you video bro...
This is not the Comfort Control Module. This is the Body Control Module. The Comfort Control Module is under the drivers side floor mat.
Hey there! Yes, that's correct. We've done a video for the actual comfort control module itself already. This unit is commonly referred to as the comfort control power supply (as per the video title):
www.google.com/search?q=comfort+control+power+supply&client=firefox-b&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjKs4OtpPLfAhU7RhUIHUAxBGcQ_AUIDygC&biw=1565&bih=978&dpr=1.25
But absolutely spot on, this unit is NOT your comfort control unit!!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Thank you jesus ive been trying to find out where the komfort module is to replace it so i can finally use my windows, convertible top and my keys lock feature
How do i get to it tho, must i remove my entire seat or can i access it without doing so? I cant find a video on it
Hi. Tim Hill do you know how to reprogram bcm? I changed mine but everything went crazy, I scared and put back the old one and now with that one my lights doesn’t work, start stop cannot turned off and inside lights doesn’t work either 😐 thank you!
@@TotalTechnik is this the same as the AC control module?
Liked and subscribed ! 💪
Thanks a lot for theusefull video !💯🙏
Excellent, thank you and glad you found it useful :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Hello. Do you know which unit/fuse/relay is for high beam front lights in Audi Q7? Hi beam does not work. I can not find out what is the problem.
I would really like a video on locating and replacing the O2 sensor on my B7 RS4. Can you help?
Question. What does the 370 relay do and the 395?
Hi guys
Question
Is this control unit have to do with also control the angle detector side mirror on a Audi A4 b8 ?
Greetings
Thanks for the info, i guess changing this will help alot as i do not have wipers, fogs front and rear, no hazards, no turn signals in front, and no bright lights infont also.
Thanks
That's on the Audi a6 3.2 c6
A4 b8 please,nice video. Thanks
Hey there! We're not covering the B8 platform yet. We're hoping to expand to be able to cover additional models, but this factor is 100% solely down to the amount of support we get from our viewers.
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Hi I have an Audi A4 2007 2.0 TDI B7 Avant everything works except for my interior lights and cig lighter the buttons light up but the bulbs don't and the error that comes up with VCDS is low positive voltage. Please help as I am not sure where to look I tried removing the CCMP like you did in the video above but then even my headlights stopped working so I dont think its that because if it was then I would also have issues with my head lights, I put it back and my head lights are fine now. Its just the interior lights.
Hello would u know where the A7 bcm is located?. Not sure if it's under rear seat.. thanks Simon
Hi sir, I have a vw passat 2011 1.6TDI. A few days ago i used the VCDS mess up some of the settings in my car BCM? only the little lcd screen in middle of dash board is powered, and the remote key can open and close the doors but the car dash board not any light on when I inserted the key( no self-test).the car can not be start, because the ignition can not be turn on, VCDS can not connect to the BCM, so I want to know that can I replace the BCM with second-hand one to fix the problem? Do I need any coding after replace the BCM? Thank you!
Hi there, quick question. Does this unit have anything to do with alarm, central locking, hazards and or side/main lights? I ask this because my A4 hazard lights keep coming on by themselves and VAG-COM pulled a fault for Switch for Emergency Flasher when scanning the Comfort Control Module.
yes brother it does,control the hazard,turn signal,dash light,wiper motor,parking ligh,head light etc,talking from my xperience My A4 B6 2002,start acting abnormal turn signals,the best thing to do is remove it & chq inside is thr any visual damage.(most cases water leak through the ECU case cause it....)
Hi! Great video, do you happen to know if this module controls the windows and reverse light switch? my power windows only seem to work when the door is open and my reverse lights are stuck on. I have already had the reverse light switch in the gearbox replaced, thanks in advance!
Edit: I started having problems with these after some welding was done to repair rust under the car, hope you can help :)
It would also be very helpful if you would state if a replacement module needs coding that can be done with vag com VCDS OR if you must take it to the Dealer because of component protection etc. Thank you.
This bcm module holds the coding for the CCM so changing this can mess about with the central locking windows lights immobiliser settings
This module controls the alarm system?
Do you guys have a shop in New York?
Hi there
Is this A4 etc. location for the BCM the same as an Audi A3 1.9Tdi March 2009 8P1.
I look forward to your response.
Tony
Hello does that module you are removing in the video have any thing to do with the air conditioner and fans please help I have 2004 s4 and have replaced bot fan modules and still have no ac and fans
I think that's something to do with the heater control under the radio that controls the fans and Aircon it dose it mostly from that module really you should use vcds and look for fault codes it the only thing I can think of that handles both of them systems this bcm has nothing to do with those neither dose the CCM the ECU received a signal to do with the air compressor but not the interior fans and the fan resistors have nothing to do with the AC pump
Will a faulty unit cause my hazard switch to stay illuminated and wont turn off after locking the car? Is this due to not going into sleep mode? Thank you.
mate how you solve this ? i hv similar issue but on the rear light
@@sathishfiles replace the part... or repair it
it is due to water corrosion inside the part, had the same issue , this part controls all the headlights switches in this car
Is it in the same location for US models??
Hello could you help to reprogram this after it’s changed? In my car everything just went crazy :/
I’m sure you found the issue a year later? Mind letting me know?
@@josezuazua7936 hello, the car had to be taken to a specialist to remove body control module. If you change an electrical part in the car the main computer blocks it as it thinks it’s stolen (a security feature). A specialist will connect your car through Germany. That’s the only way to do it. Audi dealership can do it it cost around £150.
Do you know where this module is located in the A6 C5?
Hey there. We will be doing a video for this for the C5 soon as well. Keep 'em peeled :-)
I have a audi b6 s4 and i recently dropped a socket in the cigarette lighter and the car went crazy for a moment now the turn signals wipers horn dont work as well as the headlights are a little weird i dont have tail lights when headlights are completely on and parking lights work normal but i dont hsve auto or fog lights PLEASE HELP
My comfort control module got wet I replaced it and Horan windshield wipers turn signals windows convertible top all don’t work Fuses are still good what could be the issue
I was wondering why when I put my ignition on the headlights come on and the both front indicators are on solid not flashing it’s in a Audi A3 2.0 tdi 2007
Have you tried replacing the blinker fluid?
Can u help me please i have a a4 b6 2.5tdi and when i start it the prnds is all lit red but goes back to normal after a second then if i stop and restart all is normal many thanks
That's a automatic gear box showing it's going in to limp mode
anyone no were abouts and wot number the roof relay is plz
my Audi burned the engine ecu a MED9.1 I'm buying a BCM, panel with keys and the engine ecu to put in the car my question is the car will work without programming because it has the TCM, airbag module, original comfort module car if you can help me I would be grateful I am from Brazil !!!!
hi can this module cause not working k line? my k line volte is jumping betwen 0.5v to 3v i think minimum must be 11v everything is working in my car just cant connect to diag with k line any tips?
Is this need for auto to Manual swaps?
That's a huge job. You'll be replacing a LOT of parts to get that operational unfortunately. And the cost often makes it impractial unless it's a very new or top-end model. Best of luck though, what a project!!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Isn't that a body control module by any chance? Comfort control unit is the one under the carpet( immobiliser, central locking and power windows)
The body control module controls wipers,washers,fog lights and some other optionals... or am i mistaken?
Yes, just different terminology but you are absolutely correct. BCM is probably more the acceptable term Internationally, so we've updated the title. Thank you for your input! We have also produced the Comfort Control module video for both the B6/B7 and C5 platforms as well if required.
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
One rainy night, my wipers stuck (constantly working), fog lights not functioning, left or right signals not functioning and the the light signals on the instrument clusters went down. I went to my mechanic but couldn't find the problem... It seems like this BCU
What does the BCM or CCM control in vag cars
The BCM can control loads of different things. Windows, locking, headlights, buttons, switches etc etc. It controls a lot!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Audi A6 rear sunshade not working. What problem bro. No fuse relay complaint direct motor working. Please help me
Hmmm. That's a strange one. Well if the relay is working and the motor works fine if connected to power directly, then I'd be testing the switch.
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Relay location images
Hi - I need to replace for the body control module - serial number is 8E0 907 279 F - If I get one with the same serial number, should it work without programming? And is there another serial number that's compatible? Thanks
Why did he take BCM out? What was the problem?
Hey there! There is not necessarily a problem with any of the components we remove in our videos, we are simply showing the removal process for those who are having issues with theirs.
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our CZcams channel.
3) Please give our video's the Thumbs Up on CZcams.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Hello, first of all thank you for your excellent videos.
I have an audi 2.5 tdi 2001, and I have dtc error codes that I cannot resolve.
Driver side on the module, nothing works except the passenger's window control intermittently.
I think to check all the connections and wires, open the door and test my module, look at the fuses. But after that I don't know. An opinion?
Benny
Address 09: Cent. Elect. Labels: 8E0-907-279-8E2.lbl
Part No: 8E0 907 279 D
Component: int. Lastmodul RDW 0203
Coding: 00011
Shop #: WSC 63351
VCID: 3362C48E01AE28D924-4B18
1 Fault Found:
01312 - Powertrain Data Bus
79-00 - Please Check Fault Codes
---------------------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8E0-953-549.lbl
Part No: 8E0 953 549 M
Component: Lenksáulenmodul 0209
Coding: 01021
Shop #: WSC 75663
VCID: 3D76E2B637EAEEA9C2-4B18
1 Fault Found:
01331 - Door Control Module; Driver Side (J386)
49-10 - No Communications - Intermittent
---------------------------------------------------------------------------------------------
Address 17: Instruments Labels: 8E0-920-9xx-8E2.lbl
Part No: 8E0 920 900 K
Component: KOMBI+WEGFAHRS. RB4 D35
Coding: 01000
Shop #: WSC 00006
VCID: 2C50DFF2DC90772165-513C
WAUZZZ8E63A158081 AUZ6Z0B0227017
2 Faults Found:
01331 - Door Control Module; Driver Side (J386)
49-10 - No Communications - Intermittent
------------------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 8E0-959-433-MAX.clb
Part No: 8E0 959 433 BC
Component: Komfortgerát T3B 1110
Coding: 06730
Shop #: WSC 24201
VCID: 73E2048E412E68D9E4-4B18
Subsystem 1 - Part No: 8E1959801B
Component: Tõrsteuer.FS BRM 0002
Subsystem 2 - Part No: 8E1959802B
Component: Tõrsteuer.BF BRM 0002
Subsystem 3 - Part No: 8E0959801A
Component: Tõrsteuer.HL BRM 0002
Subsystem 4 - Part No: 8E0959802A
Component: Tõrsteuer.HR BRM 0002
9 Faults Found:
01331 - Door Control Module; Driver Side (J386)
49-10 - No Communications - Intermittent
01134 - Alarm Horn (H12)
29-00 - Short to Ground
01134 - Alarm Horn (H12)
49-10 - No Communications - Intermittent
01370 - Alarm triggered by Interior Monitoring
35-00 - -
01371 - Alarm triggered by Door Contact Switch; Driver's Side
35-00 - -
01573 - Alarm triggered by Door Contact Switch; Rear Left
35-00 - -
01811 - Supply Voltage for Door Controller; Drivers Side (J386)
37-00 - Faulty
01561 - Rear left door
61-00 - Won't De-Safe
01562 - Rear right door
61-10 - Won't De-Safe - Intermittent
Love you video bro...