32 years in the plumbing business....This video gives all the toilet flanges that are made of ABS and tips for installation.Please subscribe and have a great day.
I'm not a plumber but am pretty good at logic problems. You say that if you cut a half inch off of one fitting and a half inch off the other that you will gain a full inch of extra space. That would only make sense if they sat flush against one another. Since they rest one inside the other, you will only gain the half inch. Prove me wrong! Helpful video non-the-less, thanks.
Hello 주식회사한길글로벌, Hopefully it helps with any future projects! If you have any questions feel free to ask. Thanks for the kind words and have a great week! Al
Just found a new flange! It's a WATERTIGHT TOILET FLANGE - it has a sealed bottom and actually has channels for any leaking water to go right back down the drain. It's awesome. Made by a company called Barracuda Brackets. You can even adhere this one to the floor making it stronger than stainless. Pretty cool stuff!!!
Hello Flatline Gotti; Sorry I took so long getting back to you. These fittings are all made in PVC as well. I hope you get along with your project! Thanks for commenting and drop me a line if you have any questions and I will respond as soon as possible. Best of luck with the project! Al
thanks for the information. I have some toilets that are 10in away from my wall. I was thinking of using an offset flange. From your video I now understand that they might have done the 10in instead of 12in because they had a joist in the way.
Hello deuxit; They cam out with toilets the last while that roughed in at 10 inches rather then twelve. You can still buy them and some of them are adjustable. American standard makes such a toilet. Adjusts for toilets roughed in from 10 to 14 inches. Thanks for commenting and have a great week! Al
Hello uniqueaddress; Sorry for the late response; just got in from a trip to see my sons. I have not had any problem with this issue as far as not working well. Low flushing toilets are a thumbs up in my books. Let me know how you get along! Thanks for commenting and enjoy your week! Al
Amazing video. It so wonderful to hear a true expert explain things. It makes me feel a little less crazy to know that the part I need exists. BUT Where? The second piece you introduced in this video is a 4 x 3 floor flange fitting that will go into a 90 or coupling. I need one that will work with a 3" ABS coupling, 90 or hub. Where should I look? Forgot to mention, the toilet is out and I need the part "like yesterday". Hopefully, there's a spot that has what I need and can overnight ship it. Thank YOU!
Hello Marshall Bain, You should be able to find a 4 by 3 fitting floor flange in any hardware store. This is a very common fitting. Hopefully you can find one easily! Thanks for the kind words and best of luck with the project! Al Any other questions feel free to ask!
Hello uniqueaddress; I am glad you like them! I have had great success with the one that I mentioned, but the one you purchased will work just fine. There are a few ways to anchor it down. Does the concrete come up all around the pipe or is there a box built around it? If the concrete is tight to the pipe make sure that the concrete is level. If not the toilet will not sit on the floor completely. Are you tiling it or vinyl flooring? Keep me posted...Thanks!!! Al
Hello vpbubbies; I haven't come across an offset wall flange. You are going to have to move the pipe some how if you are planning on moving the toilet. Sorry about that. I am a Caper! Thanks for commenting and best of luck with the repair! Al
Hello grides33; These flanges are all made by many different manufacturers. Most big box stores such as Home Depot would have the offset flange you are looking for. Take your time when cutting the floor for the offset flange to be installed. A little patients goes a long ways on the install. you don't want to cut out too much floor as you want something to screw the flange to. Thanks for commenting and any other questions; just give me a shout! Good luck with the house! Al
All of those toilet flanges are available with stainless steel rings. Do not use one of these if you can get a similar one with stainless steel rings. On remodel jobs I have torn out so many bad flanges that would still have been good, except they did not use one with stainless steel rings.
great job! how much are those? i keep bremeakin the johnny bolts on my alumnium flanges. the pvc type are strong I assume and cheaper, just dont want them crackin or bending as i torque down the toilet bolts?
Hello MML 1, They are not very expensive. Every store differs in price, but I would say under $10. You don't want to crank to hard on the tee bolts. You just want a snug feeling when finished. Thanks for commenting and enjoy your day! Al
oldkid what brand flanges are those? i think i need an offset flange my 12 inch rough in turned out to be more like a 13 and a half hahahhahah i have a new respect for plumbers after getting into a little hose remodel i love you man thanks for all the great videos
How does cutting a half inch off the two parts make it sit an inch lower? They don’t but against each other, so would it not just be half an inch but requiring both cuts?
The 3" inside fit flange doesn't have a funnel going down into the drain pipe like all the other flanges. Does that cause any problems with drainage? I bought one like it today because it is the only 3" inside fit closet flange I could find and it is a step down style inside like the one in your video instead of funnel style. Common sense tells me that the funnel would work best. Any recommendations for what wax ring to use particularly with this step down style flange?
Hello Jason, A regular wax seal is what I generally use with this flange. they are a little thicker than regular flanges. A wax seal with a plastic flange in it prevents the bowl from sitting flush on the floor. As far as it flowing well; no worries there. The opening of the spud on the bottom of the bowl is much smaller than the pipe. Thanks for commenting and best of luck with the project! Al
Hello Sound System Bass, You are more than welcome! Hopefully you get along well with any future projects! Thanks for commenting and have a great day! Al
Hello, great video! I have an original 4 inch cast iron pipe (100 year old house) that is level with the sub floor. The pipe immediately 90’s when it goes down. I’m wondering what flange to use to get a good seal. Thank you - Layton
Hello Layton, There are a few different flanges that you can purchase that go into cast. They make flanges that have a gasket on them that you push into the cast. They also make a flange that you put into the pipe and tighten screws which in turn compresses a gasket up against the pipe making a tight seal. Hope this helps.... Thanks for commenting and enjoy your weekend! Al
I have a black pipe that is 4" diameter on the outside. The closet flanges seem to fit on the diameter which would make it too high for the floor. Can't find a flange that fits in the inside diameter which is about 2-7/8". Concerned I couldn't cut the pipes completely level to glue.
Hello Marty, 4" outside diameter and 2-7/8ths seems to be an odd size. Generally ABS or PVC is 3.5 inches outside diameter and 3 inches inside. You may be able to find an expanding flange on line that uses screws to compress the insertable part of the flange together after it is installed in the pipe. You can find them on line. If this doesn't work for you; you could take a fitting floor flange that will fit inside the pipe and use emery cloth to sand the outside of the spigot until it fits inside. Is it ABS pipe? Thanks for commenting and get back to me when you get a chance....Al
Thanks Oldkid, Im a Caper too, from Framboise.(Out past Marion Bridge) Another Question:. Im trying to solider a 1 1/2" half copper/half ABS coupler onto an existing 1 1/2" copper drain line. (want to change from copper to ABS) but my past 3 tries have resulted in the ABS half of the fitting being deformed or coming loose from the copper half of the fitting due to the heat of soldiering it on to the existing copper line. Any tips or advice? Theyre too costly to keep ruining them! Tanks Buddy.
Hello Tim Chapman, Very true! I believe most of the trades use quarters. Working with older plumbers about four decades ago they told me that they didn't have eighths on their tapes. They only came in quarters. LOL! I know they do in our area! Thanks for commenting and enjoy your weekend! Al
Hi, great and very helpful videos. i was wondering if you can provide a bit of guidance. my flange does not sit flat against the floor as the pipe was not installed correctly. its buried in concrete in my basement and produces about 10 degree or so angle. how would you suggest i can deal with this problem? thanks!
+Lev Beylin You are more than welcome! I would remove the screws and then cut the flange flush with the floor. You can then use an insert-able flange that glues directly into the pipe. When you purchase this flange be certain that it fits inside the pipe. They make regular flanges that you glue the pipe into, fitting flanges that glue into fittings and a flange that actually glues into pipe. The last one is what you are after. After you cut the flange off and glue the new one into place you may not get a lot of it glued into the pipe because of the depth, but hold it in place for a little while to let the glue set and you should be all set! Thanks for commenting and best of luck with the project! Al Any other questions...fire away!
Hi Al, I am remodeling a half bathroom and I have to replace the toilet flange since the old one sits too high. The current flange is brass and is soldered on a 3 inch copper pipe. I am planning on cutting the copper a few inches above the 90 degree elbow and replacing with pvc, using a fernco coupling. My question is can I install a 3 inch flange using a 3 inch pvc coupling to connect it to the pipe? If I use a 3 inch outside flange I will have to install it before the floor goes on and I am concerned that there is a chance that it will not sit on top of the tile on the right height.
Hello kouts_limnos, Sounds to me like you nailed it! You want to cut the copper just above the fitting just as you stated. Leaving at least an inch to attach to. I prefer placing the Fernco on the 90 and tightening the clamp to the 90 as the fitting is thicker than the copper. You can also trim the length of both the PVC coupling and Fernco if you are tight on space. I have done it several times. Get your center measurement, lay down your floor and you are all set! Just a matter of cutting out for the flange and you are all set. Drop me a note if you have any questions. Thanks for commenting and best of luck with the project! Al
TheOldkid888, Thank you for your quick response Al. The pipe was installed yesterday. Everything went well. I put the floor down as well. Now it’s time for tiling and installing the flange!
Hello kouts_limnos, You're welcome! Nice to hear everything worked out for you! Hopefully the entire job will continue in the same direction! Best of luck! Thanks for commenting and enjoy your day! Al
Is there an inside type of flange that can fit inside a 3 inch pipe? Mine seems to be an outside flange and I would prefer the flange that goes inside the pipe ?
Hello keytothegate K, Yes. There is a fitting floor flange that fits inside pipe. So you would be looking for a fitting floor flange. That being said....... there are two different types. One is built that goes into a fitting. The other is the one you would be looking for. Here is a link for homedepot that shows it. www.homedepot.ca/product/aqua-dynamic-closet-floor-flange-3-inch-inside-fit-plastic/1000174144 Hopefully this helps. Thanks for commenting and enjoy your weekend! Al
Ive a wall mount toilet, currently 3" copper pipe comes up inside the wall, then a 90 elbow & then a wall mount closet flange, (looks same as floor mount closet flange, just copper instead of ABS) I want to shift this toilet over to 1 side as much as possible,(3" would be perfect) its in a condo in the city, moving pipe isn't an option, what about an offset flange? Is there 1 for wall mount & how far would it shift over from original position? Lastly; R U A Newfie? just wondering. Thanks bye
Great video. What happens if it is in concrete though with the offset? The builder that built this home the center of the pipe 9 inches from the wall. How do you notch cement?-Thanks!
Hello hoopernop, Thanks! American Standard use to make a toilet that roughs in at 10 inches. I am not certain about 9. If you don't come across a toilet that roughs in closer you will need a concrete drill and punch a number of holes around the pipe. I generally use a hilti TE76 for this with a half inch drill bit and then I switch it to hammer and change the drill bit to a chipper. Once you get a p[iece of concrete out' the rest will come easier. You will have to get down to the 90 (elbow) and may even have to cut it off to allow a new ninety to go on and stubbed up depending on the direction of the pipe. If that doesn't work for you a 45 and fitting 90 maybe the answer. Like I mentioned; it all depends on the direction of the pipe. Be quick when aligning your fitting as the glue will set up fast. Do a dry run first and mark it with a pencil. apply the glue and then slide the fitting on the pipe' making sure the pencil marks are aligned. Best of luck with the project! Thanks for commenting and let me know if you have any more questions. Al
Hello Debi, Thanks! You can generally find one in a big box store. They are not a common flange, but most stores carry them. I know you can get them on line if not. Probably doesn't help if you are into the project right now. If you stop at a plumbing wholesale store they may help you out. Thanks for commenting and best of luck with the project! Al
Doesn't it make more send to have the flange go on the inside of the drain pipe? I am currently repairing the upstairs bathroom flange and drain pipe because the seal has gone bad and now is leaking through the floor. My drain pipe is 3 inches and of course a 3 in flange does not fit but rather meets. The one I am replacing was 3 to 3 with a straight pipe joiner connecting them. Decisions .... guidance?
Hello Margaret; The insertable flange goes directly into the pipe. If you have the flange cut off and flush with the floor; you can glue one right into place. It will work fine for you. Thanks for commenting and have a great week! Al
TheOldkid888 Someone told me that the toilet flanges that fit inside the pipe are great for 4 inch drain pipes, but reduce the opening too much when installed into 3 inch drain pipes. What do you think?
I cannot seem to find online where you purchased the flanges with the ABS adjustable ring. Everything I find has a metal ring on it. I am specifically looking for the flange that you show fitting into a 3" elbow. If you could provide a website link, I would greatly appreciate it.
Nicholas Hoffenpiper Not sure how I missed your comment....Did not show up on my messages...I apologize for that. Some of the big box stores sell them. The metal ring works very well as you stated. I use both on my installs. You can google them and should easily come across a site that sells them...ABS Adjustable floor flange.... www.lyncar.com/plumbing/index.php?main_page=index&cPath=6_169 Thanks for commenting and have a great week! Al
Hey Al. No problem. I just posted the comment recently. You are so kind. Good to hear you like the plastic flanges too. I am a novice and just repeating what I heard. Take care.
I have the pipe sticking out of the concret in my basement like at 1:15 in the video. I need the flange that goes inside as to not have to hammer the concrete out. What is the part numer or dimensions for that? I've been trying to find it at home depot etc. My pipe seems to be tight 3" ID
Hello zooedca, You would be looking for an inside fit toilet flange. Home Depot sells it and I believe this is the correct model number. ( 3494-001) Be sure when you glue it in that your t-bolts are going to be equal distant from the wall as the top of the flange does not turn or spin like other flanges and to cut the abs as close as possible to the concrete. Slightly below works even better. You can do this with a jigsaw or reciprocating saw using it on an angle. Stuff a rag in the pipe below the concrete to prevent any pieces from going into the drain. This is crucial as the flange itself is quite thick and if it isn't laying flat on the floor perfectly your toilet will not sit flat on the floor especially if you are only using a thin material for flooring. If you are using tile instead of linoleum you will have some wiggle room. I have always called this a fitting floor flange only it fits inside the pipe rather than into a fitting. Hope this helps! Thanks for commenting and best of luck with the project! Al
Hello Hablando Boxeo, The inside diameter of the 3" pipe is 3". There is a flange that fits inside the pipe. When searching for one be sure that it is a inside diameter fitting flange that fits inside the pipe. This is an example of what you would be looking for.... www.homehardware.ca/en/3-inside-diameter-adjustable-abs-toilet-flange/p/3253231?gclid=Cj0KCQiAw9qOBhC-ARIsAG-rdn4ib9rtLjRSKFq1qeWYr7oPqfHZSEyn Hope this helps! Thanks for commenting and enjoy your day! Al
@@TheOldkid888 what happens is i cut a flange that is 4x3 pvc and it was glue to 3 inches inside diameter pipe. Now i have to pieces together. I will need 4 inches hole saw to cut the outside pipe to be able to fit a new flange on the outside of that 3 inches pipe. If you have any inputs i will take it on consideration. Thanks in advance.
@@Lifesituations8000 You can possibly remove the piece of flange inside the pipe by picking the joint. Here is a video that may help. Skip the first few minutes and you will see where I picked the joint. Take a few strips of away from inside the pipe that will allow the piece to come out easier. Place a rag inside the pipe so that you don't lose any pieces down the drain. Hope this help! czcams.com/video/1tp9bXsr0GM/video.html Let me know how you get along...Al
@@Lifesituations8000 You should be able to remove the flange from the pipe by doing the same principal as picking the inside. the only difference is you need to make a number of small cuts downward along the outside and chip them away with a screwdriver. It will take some time, but you can get it done this way.
at 1:13 what is the proper name for that flange? i was at HD today, but wasnt successful at finding it. i have that same situation in my basement right now. i dint want to break out all the cement around the pipe... thank you kindly
Hello splash, That fkange is called a fitting floor flange. There are two different types. One fits into a fitting and the other fits into a pipe. Quite often I will find concrete surrounding the pipe sticking out of the floor. This flange glues inside the pipe once it is cut flushwoth the floor. Chip any concrete around the pipe that doesn't allow the flange to set flat on the floor. This is very important as the flange is thicker then most so you want the toilet sitting level on the floor. Thanks for commenting and good luck with the project! Al
TheOldkid888 Thank you! Hope it goes well also... Iwill be tackling it this weekend. Picked up the flange yesterday evening. Il dig out my sawzall, andsee how she goes!
Hello Don Juan MTB Adventures, You would be looking for a fitting floor flange. That being said....you must be careful when looking for one. You must ask for a fitting floor flange, but make sure it glues into pipe. Can be a little difficult to find sometimes. Hope this helps! Thanks for commenting and enjoy your week! Al
I'm not a plumber but am pretty good at logic problems. You say that if you cut a half inch off of one fitting and a half inch off the other that you will gain a full inch of extra space. That would only make sense if they sat flush against one another. Since they rest one inside the other, you will only gain the half inch. Prove me wrong! Helpful video non-the-less, thanks.
Hello Veronica,
Can't dispute what you are saying. Should have said hub to hub. My bad! LOL!
Good catch!
Thanks for commenting and enjoy your week! Al
Excellent video! One of the most articulately explaned videos i've seen!
Hello 주식회사한길글로벌,
Hopefully it helps with any future projects!
If you have any questions feel free to ask.
Thanks for the kind words and have a great week! Al
Just found a new flange! It's a WATERTIGHT TOILET FLANGE - it has a sealed bottom and actually has channels for any leaking water to go right back down the drain. It's awesome. Made by a company called Barracuda Brackets. You can even adhere this one to the floor making it stronger than stainless. Pretty cool stuff!!!
+Barbara “Babs” Wagner
Great to hear!
I will have to check it out! Love new things!
Thanks for commenting and have a great weekend! Al
You're welcome, Al! Thanks!!!
Hello prospect4gold;
I hope you picked up a thing or two with the video.
Thanks for commenting and enjoy your week! Al
Hello Flatline Gotti;
Sorry I took so long getting back to you. These fittings are all made in PVC as well.
I hope you get along with your project!
Thanks for commenting and drop me a line if you have any questions and I will respond as soon as possible.
Best of luck with the project! Al
Very educational. Thanks for taking the time to put this video up.
thanks for the information. I have some toilets that are 10in away from my wall. I was thinking of using an offset flange. From your video I now understand that they might have done the 10in instead of 12in because they had a joist in the way.
Hello deuxit;
They cam out with toilets the last while that roughed in at 10 inches rather then twelve. You can still buy them and some of them are adjustable. American standard makes such a toilet. Adjusts for toilets roughed in from 10 to 14 inches.
Thanks for commenting and have a great week! Al
deuxit I would just but a 10 inch rough tank for the bowl.They're a lot skinnier but sometimes depending on the Wc the bowl gets in the way too.
Perfect illustration
Hello Naqib Naderi,
Great!
Hopefully it helps with your project!
Thanks for the kind words and enjoy your week! Al
Hello uniqueaddress;
Sorry for the late response; just got in from a trip to see my sons.
I have not had any problem with this issue as far as not working well. Low flushing toilets are a thumbs up in my books.
Let me know how you get along!
Thanks for commenting and enjoy your week! Al
Amazing video. It so wonderful to hear a true expert explain things. It makes me feel a little less crazy to know that the part I need exists. BUT Where? The second piece you introduced in this video is a 4 x 3 floor flange fitting that will go into a 90 or coupling. I need one that will work with a 3" ABS coupling, 90 or hub. Where should I look? Forgot to mention, the toilet is out and I need the part "like yesterday". Hopefully, there's a spot that has what I need and can overnight ship it. Thank YOU!
Hello Marshall Bain,
You should be able to find a 4 by 3 fitting floor flange in any hardware store. This is a very common fitting.
Hopefully you can find one easily!
Thanks for the kind words and best of luck with the project! Al
Any other questions feel free to ask!
Hello uniqueaddress;
I am glad you like them! I have had great success with the one that I mentioned, but the one you purchased will work just fine. There are a few ways to anchor it down.
Does the concrete come up all around the pipe or is there a box built around it?
If the concrete is tight to the pipe make sure that the concrete is level. If not the toilet will not sit on the floor completely. Are you tiling it or vinyl flooring?
Keep me posted...Thanks!!! Al
Great video
Hello Michel Garo,
Thank you!
Hopefully it helps with any future projects!
Thanks for commenting and enjoy your week! Al
Hello vpbubbies;
I haven't come across an offset wall flange. You are going to have to move the pipe some how if you are planning on moving the toilet.
Sorry about that.
I am a Caper!
Thanks for commenting and best of luck with the repair! Al
Good video son! ✌
Hello ShadeTree Projects!,
Thanks!
Hopefully it helped with your project!
Thanks for commenting and enjoy your week! Al
Don’t forget male and female pipe threaded flanges, those allow whatever fitting you want to go right up close to the flange
Hello grides33;
These flanges are all made by many different manufacturers.
Most big box stores such as Home Depot would have the offset flange you are looking for.
Take your time when cutting the floor for the offset flange to be installed.
A little patients goes a long ways on the install. you don't want to cut out too much floor as you want something to screw the flange to.
Thanks for commenting and any other questions; just give me a shout!
Good luck with the house! Al
All of those toilet flanges are available with stainless steel rings. Do not use one of these if you can get a similar one with stainless steel rings. On remodel jobs I have torn out so many bad flanges that would still have been good, except they did not use one with stainless steel rings.
Tanks help a lot
Hello Stéphane Gosselin,
You're welcome!
Hope the project goes well for you!
Thanks for commenting and enjoy your week! Al
great job! how much are those? i keep bremeakin the johnny bolts on my alumnium flanges. the pvc type are strong I assume and cheaper, just dont want them crackin or bending as i torque down the toilet bolts?
Hello MML 1,
They are not very expensive. Every store differs in price, but I would say under $10.
You don't want to crank to hard on the tee bolts. You just want a snug feeling when finished.
Thanks for commenting and enjoy your day! Al
oldkid
what brand flanges are those?
i think i need an offset flange
my 12 inch rough in turned out to be more like a 13 and a half hahahhahah
i have a new respect for plumbers after getting into a little hose remodel
i love you man thanks for all the great videos
How does cutting a half inch off the two parts make it sit an inch lower? They don’t but against each other, so would it not just be half an inch but requiring both cuts?
The 3" inside fit flange doesn't have a funnel going down into the drain pipe like all the other flanges. Does that cause any problems with drainage? I bought one like it today because it is the only 3" inside fit closet flange I could find and it is a step down style inside like the one in your video instead of funnel style. Common sense tells me that the funnel would work best. Any recommendations for what wax ring to use particularly with this step down style flange?
Hello Jason,
A regular wax seal is what I generally use with this flange. they are a little thicker than regular flanges. A wax seal with a plastic flange in it prevents the bowl from sitting flush on the floor.
As far as it flowing well; no worries there. The opening of the spud on the bottom of the bowl is much smaller than the pipe.
Thanks for commenting and best of luck with the project! Al
This helped Thanks!
Hello Sound System Bass,
You are more than welcome!
Hopefully you get along well with any future projects!
Thanks for commenting and have a great day! Al
Hello, great video! I have an original 4 inch cast iron pipe (100 year old house) that is level with the sub floor. The pipe immediately 90’s when it goes down. I’m wondering what flange to use to get a good seal. Thank you - Layton
Hello Layton,
There are a few different flanges that you can purchase that go into cast. They make flanges that have a gasket on them that you push into the cast. They also make a flange that you put into the pipe and tighten screws which in turn compresses a gasket up against the pipe making a tight seal.
Hope this helps....
Thanks for commenting and enjoy your weekend! Al
I have a black pipe that is 4" diameter on the outside. The closet flanges seem to fit on the diameter which would make it too high for the floor. Can't find a flange that fits in the inside diameter which is about 2-7/8". Concerned I couldn't cut the pipes completely level to glue.
Hello Marty,
4" outside diameter and 2-7/8ths seems to be an odd size.
Generally ABS or PVC is 3.5 inches outside diameter and 3 inches inside. You may be able to find an expanding flange on line that uses screws to compress the insertable part of the flange together after it is installed in the pipe. You can find them on line.
If this doesn't work for you; you could take a fitting floor flange that will fit inside the pipe and use emery cloth to sand the outside of the spigot until it fits inside. Is it ABS pipe?
Thanks for commenting and get back to me when you get a chance....Al
Thanks Oldkid, Im a Caper too, from Framboise.(Out past Marion Bridge) Another Question:. Im trying to solider a 1 1/2" half copper/half ABS coupler onto an existing 1 1/2" copper drain line. (want to change from copper to ABS) but my past 3 tries have resulted in the ABS half of the fitting being deformed or coming loose from the copper half of the fitting due to the heat of soldiering it on to the existing copper line. Any tips or advice? Theyre too costly to keep ruining them! Tanks Buddy.
There are only fourths in math class and cooking. In plumbing we have quarters
Hello Tim Chapman,
Very true!
I believe most of the trades use quarters. Working with older plumbers about four decades ago they told me that they didn't have eighths on their tapes. They only came in quarters. LOL!
I know they do in our area!
Thanks for commenting and enjoy your weekend! Al
Hi, great and very helpful videos. i was wondering if you can provide a bit of guidance. my flange does not sit flat against the floor as the pipe was not installed correctly. its buried in concrete in my basement and produces about 10 degree or so angle. how would you suggest i can deal with this problem? thanks!
+Lev Beylin
You are more than welcome!
I would remove the screws and then cut the flange flush with the floor. You can then use an insert-able flange that glues directly into the pipe. When you purchase this flange be certain that it fits inside the pipe. They make regular flanges that you glue the pipe into, fitting flanges that glue into fittings and a flange that actually glues into pipe. The last one is what you are after.
After you cut the flange off and glue the new one into place you may not get a lot of it glued into the pipe because of the depth, but hold it in place for a little while to let the glue set and you should be all set!
Thanks for commenting and best of luck with the project! Al
Any other questions...fire away!
Hi Al,
I am remodeling a half bathroom and I have to replace the toilet flange since the old one sits too high. The current flange is brass and is soldered on a 3 inch copper pipe. I am planning on cutting the copper a few inches above the 90 degree elbow and replacing with pvc, using a fernco coupling. My question is can I install a 3 inch flange using a 3 inch pvc coupling to connect it to the pipe? If I use a 3 inch outside flange I will have to install it before the floor goes on and I am concerned that there is a chance that it will not sit on top of the tile on the right height.
Hello kouts_limnos,
Sounds to me like you nailed it!
You want to cut the copper just above the fitting just as you stated. Leaving at least an inch to attach to. I prefer placing the Fernco on the 90 and tightening the clamp to the 90 as the fitting is thicker than the copper. You can also trim the length of both the PVC coupling and Fernco if you are tight on space. I have done it several times.
Get your center measurement, lay down your floor and you are all set! Just a matter of cutting out for the flange and you are all set.
Drop me a note if you have any questions.
Thanks for commenting and best of luck with the project! Al
TheOldkid888, Thank you for your quick response Al. The pipe was installed yesterday. Everything went well. I put the floor down as well. Now it’s time for tiling and installing the flange!
Hello kouts_limnos,
You're welcome!
Nice to hear everything worked out for you!
Hopefully the entire job will continue in the same direction!
Best of luck!
Thanks for commenting and enjoy your day! Al
Is there an inside type of flange that can fit inside a 3 inch pipe? Mine seems to be an outside flange and I would prefer the flange that goes inside the pipe ?
Hello keytothegate K,
Yes. There is a fitting floor flange that fits inside pipe. So you would be looking for a fitting floor flange. That being said....... there are two different types. One is built that goes into a fitting. The other is the one you would be looking for. Here is a link for homedepot that shows it.
www.homedepot.ca/product/aqua-dynamic-closet-floor-flange-3-inch-inside-fit-plastic/1000174144
Hopefully this helps.
Thanks for commenting and enjoy your weekend! Al
Ive a wall mount toilet, currently 3" copper pipe comes up inside the wall, then a 90 elbow & then a wall mount closet flange, (looks same as floor mount closet flange, just copper instead of ABS) I want to shift this toilet over to 1 side as much as possible,(3" would be perfect) its in a condo in the city, moving pipe isn't an option, what about an offset flange? Is there 1 for wall mount & how far would it shift over from original position? Lastly; R U A Newfie? just wondering. Thanks bye
Great video. What happens if it is in concrete though with the offset? The builder that built this home the center of the pipe 9 inches from the wall. How do you notch cement?-Thanks!
Hello hoopernop,
Thanks!
American Standard use to make a toilet that roughs in at 10 inches. I am not certain about 9.
If you don't come across a toilet that roughs in closer you will need a concrete drill and punch a number of holes around the pipe. I generally use a hilti TE76 for this with a half inch drill bit and then I switch it to hammer and change the drill bit to a chipper. Once you get a p[iece of concrete out' the rest will come easier.
You will have to get down to the 90 (elbow) and may even have to cut it off to allow a new ninety to go on and stubbed up depending on the direction of the pipe. If that doesn't work for you a 45 and fitting 90 maybe the answer. Like I mentioned; it all depends on the direction of the pipe.
Be quick when aligning your fitting as the glue will set up fast. Do a dry run first and mark it with a pencil. apply the glue and then slide the fitting on the pipe' making sure the pencil marks are aligned.
Best of luck with the project!
Thanks for commenting and let me know if you have any more questions. Al
Was it your DIY project? I thought builders have a blueprint and everyone follows preapproved specs.
Great video. I need an offset flange with 3-inch spigot end connection. I'm not having any luck finding one. Any ideas?
Hello Debi,
Thanks!
You can generally find one in a big box store. They are not a common flange, but most stores carry them.
I know you can get them on line if not. Probably doesn't help if you are into the project right now.
If you stop at a plumbing wholesale store they may help you out.
Thanks for commenting and best of luck with the project! Al
Merciiiiiiii
Hello Dosili Michel,
De rien!
Best of luck with the project!
Thanks for commenting and enjoy your weekend! Al
I want to raise my Toilet about 4inches off the floor, Is there an adapter that i can use between the ninety and the Flange?
Doesn't it make more send to have the flange go on the inside of the drain pipe? I am currently repairing the upstairs bathroom flange and drain pipe because the seal has gone bad and now is leaking through the floor. My drain pipe is 3 inches and of course a 3 in flange does not fit but rather meets. The one I am replacing was 3 to 3 with a straight pipe joiner connecting them. Decisions .... guidance?
Hello Margaret;
The insertable flange goes directly into the pipe.
If you have the flange cut off and flush with the floor; you can glue one right into place.
It will work fine for you.
Thanks for commenting and have a great week! Al
TheOldkid888 Someone told me that the toilet flanges that fit inside the pipe are great for 4 inch drain pipes, but reduce the opening too much when installed into 3 inch drain pipes. What do you think?
I cannot seem to find online where you purchased the flanges with the ABS adjustable ring. Everything I find has a metal ring on it. I am specifically looking for the flange that you show fitting into a 3" elbow. If you could provide a website link, I would greatly appreciate it.
Eddie Stigile Some people prefer the metal rings since they are less likely to flex and break.
Nicholas Hoffenpiper
Not sure how I missed your comment....Did not show up on my messages...I apologize for that.
Some of the big box stores sell them.
The metal ring works very well as you stated. I use both on my installs.
You can google them and should easily come across a site that sells them...ABS Adjustable floor flange....
www.lyncar.com/plumbing/index.php?main_page=index&cPath=6_169
Thanks for commenting and have a great week! Al
Hey Al. No problem. I just posted the comment recently. You are so kind. Good to hear you like the plastic flanges too. I am a novice and just repeating what I heard. Take care.
Best of luck Nicholas!
You as well!
Be nice if you gave brand names and part numbers for each of the flanges you show here. As is, we can only guess!
I have the pipe sticking out of the concret in my basement like at 1:15 in the video. I need the flange that goes inside as to not have to hammer the concrete out.
What is the part numer or dimensions for that? I've been trying to find it at home depot etc. My pipe seems to be tight 3" ID
Hello zooedca,
You would be looking for an inside fit toilet flange. Home Depot sells it and I believe this is the correct model number. ( 3494-001)
Be sure when you glue it in that your t-bolts are going to be equal distant from the wall as the top of the flange does not turn or spin like other flanges and to cut the abs as close as possible to the concrete. Slightly below works even better. You can do this with a jigsaw or reciprocating saw using it on an angle. Stuff a rag in the pipe below the concrete to prevent any pieces from going into the drain. This is crucial as the flange itself is quite thick and if it isn't laying flat on the floor perfectly your toilet will not sit flat on the floor especially if you are only using a thin material for flooring. If you are using tile instead of linoleum you will have some wiggle room.
I have always called this a fitting floor flange only it fits inside the pipe rather than into a fitting.
Hope this helps!
Thanks for commenting and best of luck with the project! Al
@@TheOldkid888 Thank you for the information. I went last night and grabbed it from Home Depot... My project for the weekend!
@@zooedca Best of luck with the project! Al
Is there a flange that will fit inside 3" drain pipe?
Hope everything works out for you! Al
If you have a pipe that is 3 inches is there anything that fits inside that 3 inches pipe. I ended up cuting the flange and it was fit on the outside
Hello Hablando Boxeo,
The inside diameter of the 3" pipe is 3". There is a flange that fits inside the pipe. When searching for one be sure that it is a inside diameter fitting flange that fits inside the pipe.
This is an example of what you would be looking for....
www.homehardware.ca/en/3-inside-diameter-adjustable-abs-toilet-flange/p/3253231?gclid=Cj0KCQiAw9qOBhC-ARIsAG-rdn4ib9rtLjRSKFq1qeWYr7oPqfHZSEyn
Hope this helps!
Thanks for commenting and enjoy your day! Al
@@TheOldkid888 what happens is i cut a flange that is 4x3 pvc and it was glue to 3 inches inside diameter pipe. Now i have to pieces together. I will need 4 inches hole saw to cut the outside pipe to be able to fit a new flange on the outside of that 3 inches pipe. If you have any inputs i will take it on consideration. Thanks in advance.
@@Lifesituations8000
You can possibly remove the piece of flange inside the pipe by picking the joint. Here is a video that may help. Skip the first few minutes and you will see where I picked the joint. Take a few strips of away from inside the pipe that will allow the piece to come out easier. Place a rag inside the pipe so that you don't lose any pieces down the drain. Hope this help!
czcams.com/video/1tp9bXsr0GM/video.html
Let me know how you get along...Al
@@TheOldkid888 The problem is i believe the flange was installed on the outside of the pipe not the inside.
@@Lifesituations8000
You should be able to remove the flange from the pipe by doing the same principal as picking the inside. the only difference is you need to make a number of small cuts downward along the outside and chip them away with a screwdriver. It will take some time, but you can get it done this way.
at 1:13 what is the proper name for that flange? i was at HD today, but wasnt successful at finding it.
i have that same situation in my basement right now. i dint want to break out all the cement around the pipe...
thank you kindly
Hello splash,
That fkange is called a fitting floor flange. There are two different types. One fits into a fitting and the other fits into a pipe. Quite often I will find concrete surrounding the pipe sticking out of the floor. This flange glues inside the pipe once it is cut flushwoth the floor. Chip any concrete around the pipe that doesn't allow the flange to set flat on the floor. This is very important as the flange is thicker then most so you want the toilet sitting level on the floor.
Thanks for commenting and good luck with the project! Al
TheOldkid888
Thank you
I will head back to HD shortly and pick one up...
Thanks for the reply
Hello splash,
I hope the project goes well for you!
Thanks for commenting and enjoy your weekend! Al
TheOldkid888
Thank you!
Hope it goes well also...
Iwill be tackling it this weekend. Picked up the flange yesterday evening. Il dig out my sawzall, andsee how she goes!
Hopefully it will go well for you! Al
Do flange goes inside the drain pipe?
Hello Boring Man,
Best of luck!
Any other questions feel free to ask!
Have a good one! Al
Hello. What size/name was it that fits straight to a pipe?
Hello Don Juan MTB Adventures,
You would be looking for a fitting floor flange.
That being said....you must be careful when looking for one. You must ask for a fitting floor flange, but make sure it glues into pipe.
Can be a little difficult to find sometimes.
Hope this helps!
Thanks for commenting and enjoy your week! Al
Any leads on where to buy a fitting floor flange. I have a 4 inch pipe. Nothing at box stores is a match.
@@Ben-it3lr it's been a while and I cant even remember where I got mine. I think it was from home depot.
Please contact me asap, thanks so much!!! I have old pvc i need help with