How to change rear shock absorber on FIAT BRAVO 2 (198) [TUTORIAL AUTODOC]

How to change rear shock absorber on FIAT BRAVO 2 (198) 1.6 Hatchback 11.2006-present [TUTORIAL AUTODOC]
Shock absorber on FIAT Stilo Multi Wagon (192) (01.2003 - 08.2008) / LANCIA Delta III (844) (08.2008 - 08.2014) / FIAT Stilo Hatchback (192) (10.2001 - 11.2006) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce shock absorber: RIDEX; STARK; MONROE; KAMOKA; SACHS.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Shock absorber: www.autodoc.co.uk/car-parts/s...
Shock absorber for FIAT BRAVO 2: www.autodoc.co.uk/car-parts/s...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ czcams.com/users/AutodocUk?s...
🛠️ The tools you need to replace rear shock absorber:
- wire brush
- WD-40 spray
- copper grease
- combination spanner no. 17
- drive socket no. 19
- wheel impact socket no.17
- torque wrench
- tap wrench
- locking pliers
- hydraulic transmission jack
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► FIAT car repair tutorial - • FIAT car repair tutori...
► FIAT BRAVO 2 (198) car repair tutorial - • FIAT BRAVO 2 (198) car...
► How to replace rear wheel bearing / rear hub bearing on FIAT BRAVO 2 (198) - • How to change rear whe...
Mobile Shop: m.autodoc.co.uk
📢 AUTODOC in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
CZcams: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
© 2019 AUTODOC GmbH All rights reserved

[@autodocuk]

Attention! This video contains mistakes:
2:47 - the tightening torque is 110 Nm, not 85 Nm.
3:45 - the tightening torque is 120 Nm, not 110 Nm.
3:27 - the tightening torque is 25 Nm, not 60 Nm.
We're sorry for the inconvenience 🙇‍♂

[@walidshibani9593]

Good job and perfect tools

[@autodocuk]

Thank you for your feedback! We are glad to know this tutorials was useful to you. Stay tuned for more! Best regards, Autodoc team!

[@walidshibani9593]

@@autodocuk sure i will do...good times all of you and please if you have any videos for the bravo mk2 1.4 tjet 16v especially selespeed trans i know it may be a big job to be on video but at least some ideas

[@autodocuk]

Thank you for your feedback!
We are glad to know this tutorial was useful to you.
Stay tuned for more!
Best regards,
Autodoc team!

[@autodocuk]

Have a look at other videos on our channel:
🔸 FIAT BRAVO 2 (198) car repair tutorial - czcams.com/play/PLWep5LzT0sxnXSk_ZGV8EQNE0u0xsEvuC.html
🔸 How to replace front strut mount / top munt FIAT BRAVO 2 (198) -
czcams.com/video/umNe3eD1Mbs/video.html
🔸 How to replace front springs / front coil springs on FIAT BRAVO 2 (198) -
czcams.com/video/3EJi98fSYP8/video.html
🔸 How to replace a front shock strut on FIAT BRAVO 2 (198) -
czcams.com/video/_VMKHSPNhjc/video.html
🔸 How to replace wipers blades / window wipers FIAT BRAVO 2 (198) - czcams.com/video/LiRQdUC3LyU/video.html

[@walidshibani9593]

Please autodoc team
Any new videos about fiat bravo mk2 petrol 1.4 tjet?many thanks

[@autodocuk]

Thank you for your feedback!
We make our videos based on recommendations we get from people who need them. Your preference will be certainly taken into consideration.
Best regards,
Autodoc team!