How to change a front shock strut on FIAT BRAVO 2 (198) [TUTORIAL AUTODOC]

Sdílet
Vložit
  • čas přidán 27. 08. 2024
  • How to change a front shock strut on FIAT BRAVO 2 (198) 1.6 Hatchback 11.2006-present [TUTORIAL AUTODOC]
    Shock strut on FIAT Stilo Multi Wagon (192) (01.2003 - 08.2008) / LANCIA Delta III (844) (08.2008 - 08.2014) / FIAT Stilo Hatchback (192) (10.2001 - 11.2006) cars should be replaced, as a rule, according to one and the same procedure.
    However, there can be slight differences due to specific features of the vehicle design.
    🔝 Top brands that produce shock strut: STARK; FEBI BILSTEIN; SACHS; RIDEX; MONROE.
    📲 Buying via app is always cheaper than on the website!
    ❱❱ Install the AutoDoc App - interstitials....
    🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co...
    Springs: www.autodoc.co...
    Springs for FIAT BRAVO 2: www.autodoc.co...
    Shock absorber: www.autodoc.co...
    Shock absorber for FIAT BRAVO 2: www.autodoc.co...
    Strut mount: www.autodoc.co...
    Strut mount for FIAT BRAVO 2: www.autodoc.co...
    LIQUI MOLY Chain Spray: www.autodoc.co...
    WD-40 Grease Spray: www.autodoc.co...
    🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
    🛠️ The tools you need to replace a front shock strut:
    - wire brush
    - WD-40 spray
    - copper grease
    - HEX bit No.H6
    - combination spanner No.15
    - combination spanner No.17
    - combination spanner No.19
    - drive socket No.15
    - drive socket No.17
    - drive socket No.19
    - wheel impact socket №17
    - ratchet wrench
    - torque wrench
    - tap wrench
    - crow bar
    - hydraulic strut spring compressor
    - hydraulic transmission jack
    - fender cover
    - wheel chock
    Was this video helpful? Give it a thumbs-up and share it with your friends!
    Have a look at other videos on our channel:
    ► FIAT car repair tutorial - • FIAT car repair tutori...
    ► FIAT BRAVO 2 (198) car repair tutorial - • FIAT BRAVO 2 (198) car...
    ► How to replace rear wheel bearing / rear hub bearing on FIAT BRAVO 2 (198) - • How to change rear whe...
    ► How to replace rear shock absorber on FIAT BRAVO 2 (198) - • How to change rear sho...
    Mobile Shop: m.autodoc.co.uk
    📢 AUTODOC in social media:
    Facebook: / autodoc.co.uk
    Twitter: / autodoc_berlin
    CZcams: / autodocuk
    Instagram: / autodoc_autoparts
    #autodoc #autodoctutorial
    Disclaimer:
    This video is intended for informational purposes only and does not guarantee achievement of a specific result.
    It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
    This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
    © 2019 AUTODOC GmbH All rights reserved

Komentáře • 15

  • @autodocuk
    @autodocuk  Před 9 měsíci +2

    Attention! This video contains mistakes:
    7:36 - the tightening torque is 70 Nm, not 80 Nm.
    10:03 - the tightening torque is 44 Nm, not 51 Nm.
    We're sorry for the inconvenience 🙇‍♂

  • @guylevinger9330
    @guylevinger9330 Před 2 lety +5

    The tutorial is good but not 100% correct, the top strut mounts needs to aligned with the body making and you don’t do it in the video.

  • @autodocuk
    @autodocuk  Před 5 lety

    Have a look at other videos on our channel:
    🔸 FIAT BRAVO 2 (198) car repair tutorial - czcams.com/play/PLWep5LzT0sxnXSk_ZGV8EQNE0u0xsEvuC.html
    🔸 How to replace front brake discs / front brake rotors on FIAT BRAVO 2 (198) -
    czcams.com/video/mqquAW9WuQY/video.html
    🔸 How to replace front brake pads / front brake pad set on FIAT BRAVO 2 (198) -
    czcams.com/video/cl0nXM3PnJM/video.html
    🔸 How to replace fuel filter FIAT BRAVO 2 (198) -
    czcams.com/video/9BeWtQpB9Bc/video.html
    🔸 How to replace front anti roll bar link / front drop link on FIAT BRAVO 2 (198) - czcams.com/video/Q55XA3xMCZU/video.html

    • @gibsonjavier8271
      @gibsonjavier8271 Před 3 lety

      I realize Im pretty off topic but does anyone know of a good site to stream new movies online?

    • @briaratlas7451
      @briaratlas7451 Před 3 lety

      @Gibson Javier i would suggest FlixZone. You can find it on google :)

    • @killianbridger3206
      @killianbridger3206 Před 3 lety

      @Briar Atlas yea, I've been watching on flixzone for months myself =)

    • @gibsonjavier8271
      @gibsonjavier8271 Před 3 lety

      @Briar Atlas Thanks, I signed up and it seems to work :D I really appreciate it !!

    • @briaratlas7451
      @briaratlas7451 Před 3 lety

      @Gibson Javier glad I could help xD

  • @alexey9900
    @alexey9900 Před 5 lety +1

    Good 👍👍👍

  • @nezircaglar2381
    @nezircaglar2381 Před 3 lety

    i have a 2009 fiat bravo 1.4 turbo sport. i guess i need to change torsion mounting bushings..

    • @autodocuk
      @autodocuk  Před 3 lety

      Thank you for your comment!
      At the moment we can recommend only this tutorial:
      czcams.com/play/PLWep5LzT0sxnXSk_ZGV8EQNE0u0xsEvuC.html
      Stay tuned with us for more new tutorials coming soon
      Best Regards,
      Autodoc team

  • @j.manuelhdez4908
    @j.manuelhdez4908 Před 2 lety

    Con que otro vehículo son compatibles los amortiguadores de un Fiat bravo ll 2009 t-jet

    • @autodocuk
      @autodocuk  Před 2 lety

      Por favor, ponte en contacto con nuestra Atención al Cliente te ayuda a resolver cualquier duda: www.autodoc.es/services/contact Tu equipo de AUTODOC.

  • @erdembk894
    @erdembk894 Před 4 měsíci

    misaligned installation and wrong use of the key and the rachet. Key should be turned rachet should be stable.

    • @autodocuk
      @autodocuk  Před 4 měsíci

      We're sure your comment will be helpful to many of our viewers.