How to change rear brake discs / rear brake rotors on FIAT BRAVO 2 (198) [TUTORIAL AUTODOC]
Vložit
- čas přidán 27. 08. 2024
- How to change rear brake discs / rear brake rotors on FIAT BRAVO 2 (198) 1.6 Hatchback 11.2006-present [TUTORIAL AUTODOC]
Brake discs FIAT Stilo Multi Wagon (192) (01.2003 - 08.2008) / LANCIA Delta III (844) (08.2008 - 08.2014) / FIAT Stilo Hatchback (192) (10.2001 - 11.2006) cars should be replaced, as a rule, according to one and the same procedure. However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce brake discs: BREMBO; RIDEX; BOSCH; STARK; ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co...
Brake discs: www.autodoc.co...
Brake discs for FIAT BRAVO 2: www.autodoc.co...
LIQUI MOLY Chain Spray: www.autodoc.co...
WD-40 Grease Spray: www.autodoc.co...
LIQUI MOLY Fast Cleaner: www.autodoc.co...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
🛠️The tools you need to replace rear brake discs:
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- drive socket no. 12
- drive socket no. 13
- drive socket no. 17
- wheel impact socket no.17
- brake caliper wind back tool
- ratchet wrench
- torque wrench
- tap wrench
- rubber mallet
- crow bar
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► FIAT car repair tutorial - • FIAT car repair tutori...
► FIAT BRAVO 2 (198) car repair tutorial - • FIAT BRAVO 2 (198) car...
► How to replace rear wheel bearing / rear hub bearing on FIAT BRAVO 2 (198) - • How to change rear whe...
► How to replace rear shock absorber on FIAT BRAVO 2 (198) - • How to change rear sho...
Mobile Shop: m.autodoc.co.uk
📢 AUTODOC in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
CZcams: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
© 2019 AUTODOC GmbH All rights reserved
Attention! This video contains mistakes:
4:40 - the tightening torque is 62 Nm, not 85 Nm.
5:31 - the tightening torque is 30 Nm, not 35 Nm.
6:31 - the tightening torque is 120 Nm, not 110 Nm.
We're sorry for the inconvenience 🙇♂
Have a look at other videos on our channel:
🔸 FIAT BRAVO 2 (198) car repair tutorial - czcams.com/play/PLWep5LzT0sxnXSk_ZGV8EQNE0u0xsEvuC.html
🔸 How to replace front strut mount / top munt FIAT BRAVO 2 (198) -
czcams.com/video/umNe3eD1Mbs/video.html
🔸 How to replace front springs / front coil springs on FIAT BRAVO 2 (198) -
czcams.com/video/3EJi98fSYP8/video.html
🔸 How to replace a front shock strut on FIAT BRAVO 2 (198) -
czcams.com/video/_VMKHSPNhjc/video.html
🔸 How to replace wipers blades / window wipers FIAT BRAVO 2 (198) - czcams.com/video/LiRQdUC3LyU/video.html
thank you....dear شكرا
Thank you for your feedback! We are glad to know this tutorials was useful to you. Stay tuned for more! Best regards, Autodoc
At 4:40 the torque spec for the caliper bracket is wrong. This bolt is an M10x1.25 Grade 8.8 and 25mm long and very difficult to get hold of on a Sunday as I found out after over torquing it :( 85Nm is way too high for this fastener. The correct value is 58Nm (middle of Fiat's spec of 54Nm - 62Nm).
Hi great vid we would also like to see a clutch replacement !
Good 👍👍👍
Are rear brake the same as front maybe to swap them
Can't turn the brake caliper back in... Damnn
If you have problems with replacement, we recommend contacting the technical service for quality service of your car.
AUTODOC
No cleaning of the bearing surface between the hub and the disc at all? Cleaning the plate holder with a brush? And what about the rust under those stainless steel sheets that gains and grips the pads and then the brakes keep braking? Absolute absence of control of the function of the guides and their cleaning. No cleaning or checking the flatness of the bearing surfaces between the caliper and the plates? This is really a very bad guide ...
Hi! You are right, some moments in the video were missed, but our channel is not educational and is only for informational purposes. We strongly recommend that all replacements, especially those relating to the brake system, be carried out exclusively at a specialized service.