Hand Laminating a Carbon Fibre Part Directly into a 3D Printed Mould
Vložit
- čas přidán 10. 06. 2024
- ►Full project details and links www.easycomposites.co.uk/lear...
►Video about the starter kit • 3D Print to Carbon Fib...
Further information and links ▼
►Thanks to Dynamism for help and advice with the 3D printer dynamism.com/3dp-cf
In this video tutorial we demonstrate how a genuine carbon fibre part can be created by hand laminating directly into a 3D printed mould.
In the tutorial we begin by 3D printing the female mould on a conventional FDM printer (an Ultimaker S3) which we then coat with PVA release agent. The carbon fibre part is then hand laminated directly into the mould using no specialist tools or equipment. Once the parts have cured they are demoulded, some minor repairs are made and then they are coated and finished using XCR coating resin.
Except for the 3D printer and filament, all materials used in the tutorial are available from Easy Composites, including the EL2 Laminating Epoxy and 2x2 Twill carbon fibre cloth which are both included in Easy Composites' Carbon Fibre Laminating Starter Kit. - Věda a technologie
Me at 3am: InTerEsTiNg
Me with 5 dollars and a shitty and not dry Pla in the printer
Finally a messy old school wet layup with modern techniques like 3D printing.
Great stuff in this one. I'll definately have to try the 3D printing route.
You are the best! Great educational videos, no nonsense and straight to the point. Keep up the good work!
Thank you John 👍
So glad I made this, make more, this is the majority of your customers.
What he said^
Have you got their sales data to back up this claim?
@@jamestrotter7852 Mr fact checker over here
4ț UK f.c.c f
By far one of the best instructional video channels on CZcams.
Thank you very much 🙏
Instead of spending 5k on overrated car parts and spoilers, I think I will invest in this...I already have experience with 3d printers, just needed the carbon fiber bit..thank you
A lot of that $5k comes from having to make the mould. Doing it your self you might save 50-60% of the cost, but it's also a lot more fun and rewarding
@Elliott Pitter wow you must be so cool
@Draven Luciano @Elliott Pitter scammers
Exactly, and you can print a variety of pocket vaginas if you get the right filament material
@@VoltageLP you can always use the printer to make a silicon mold ;)
Excellent video as always! Bringing 3D printing into this is a game changer, the mould production was always the hurdle for me, can’t wait to try this!
Just wanted to say that this channel has been a fantastic resource for my University's UAV team. We used a similar process to produce our carbon fiber wings. Thank you so much for the great videos and keep up the great work!
How many carbon fiber sheets did you use?
Incredible, I recently bought a 3d printer to make simple brackets and interior pieces for my car, but now the possibility of making them fibreglass or even carbon fibre is amazing
I can't express how much I appreciate your thorough instructions!
You’re very welcome James
I was just on the phone with our machine shop discussing how awesome your channel is for people getting into composites, and how awesome your store is for getting project supplies. Thanks!
Hi Robin, thank you very much. We appreciate your support 👍
I have no idea how I got here, but now I want to make something with carbon fiber. Great video!
We now want a “vacuum bagging a 3D printed mould” video! Very cool, thanks Easy Composites ❤️
well it's not different then this tutorial
czcams.com/video/cj26c3V54SQ/video.html
Great video! If you print with PLA, you don't have to worry about slip angles or even returns, as the mould can be warmed with a hair dryer and bent away from the part to release. It is a huge benefit.
@@mattmurphy7030 yeah, they cost virtually nothing to print, so for single or low volume, they can be 'disposable'.. it does allow some benefits not possible any other way..
Would you recommend PLA over PETG? Or are there any disadvantages to using PLA?
@@veldhuisracing PLA is good because you can melt it away from the part at a fairly low temperature. But if you have a thick layup that will get hot during curing, the mould can distort, so PETG would be better.
Thx for sharing, I want to get into this. I was wondering if my pla would be good
Amazing sound quality and great tutorial!
Excellent, straightforward, very informative!
In my opinion this is one of the best channels on YT!
Thanks
This is EXACTLY what I was hoping to find, perfect for what I do. Thanks for your detail as always, extremely helpful.
Saludos y gracias por rasmitir▶️hanny bass🔊🤑fibra de carbono🤑
Really helpful video. I especially appreciate showing how to make fixes when things don’t turn out perfect the first time.
Perfect timing! About to make my first glass fiber part. All these videos really help
Thank you so much for making these videos. i have learned more from watching your videos, then i have watching hundreds of other carbon fiber videos on youtube.
as others commented, excellent, straight to the point videos, with great narration and pace. thanks for sharing.
This channel is so thorough in explaining. Thank you guys.
Another professional and informative video. Keep it up guys. It’s a valuable service. 👍
Many Thanks. It's really great that you covered this topic. Compact and always to the point. That was a great help for my project.
Fantastic tutorial. There are no questions unanswered. Thx!
This is the first video I have seen on your channel. Your shop looks impeccable. Great content! I guess this will be my next youtube / hobby rabbit hole :D
Thanks for the video, again! Always happy to see a new upload from you guys
This channel is gold!
Thank you very much 🙏
This is the perfect type of content. I wouldn't be interested in vacuum sealing for 1 single one-off part usually, but now I see the process and why you'd consider it. So now I would likely actually do the vacuum sealing process. But it's really cool to know this can be done with 3D printed molds and turn out well either way.
Thanks for the comment, I’m glad this video has helped to explain a good reason behind at least some basic vacuum bagging.
Exactly the tutorial I needed! Thank you so much!
Glad it helped!
Hi there. You are my latest CZcams channel addiction😂 It's awesome your showing how usable and accessible your products are for small to huge projects. Great video as always(so far😉).ThankQ. TkEZ.
Commenting to get this channel more attention - I've enjoyed your videos for years now.
This channel is just perfect.
this is the greatest channel on the planet
Thanks for this helpfull video. Perfect explanation. I have made my first carbon part last week in the same way.
This dude is aesthetic af
Absolutely stellar content as always!
An abundance of good advice, thank you!
Guys, you are just great! Everything is so to the point I wish all instructional vids were like this.
Thanks a lot, we love making them.
You are a total wizard.
Excellent. An amazing example of how to take a part from prototype to finish. All within a short cycle.
Thanks Jack, glad you enjoyed it.
Still in love with your product and the tutorial. Thanks a bunch
Thanks Hoss!
Always looking forward to all your videos!
Wow, 530 likes in 2 hours. You guys have the best content! That proves it. Awesome work as always!
Thanks Caleb!
Super nice that you did a tutorial on this stuff.
I have been experimenting A LOT with 3D printed parts and 3D printed moulds / mould masters up to 1.35m to make CF watersport structures.
One thing I found on the way is that PU epoxy primer (sold at HP-text....), is a superb primer to stick something to PETG. You only need like 50gr to coat the surface on a meter long part, but after that you can laminate glass or CF to the 3D printed structure without issues. You can't pull it off anymore. Maybe Easy Composites has a similair product. :)
Another thing is printing very low infill single shelled 3D printed PETG moulds, with the infill arranged as long channels (1 infill angle) and filling them up with e.g. epoxy foam.
May i ask if you have experience which coating i can use to pit permanently into the negative mold? I want to get rid of all little imperfections and layer lines but still want to be able to the the molded part out of the mold
Brilliant resources, thank you- super clear
3d printing is freaking amazing
You're great in front of camera, great videos.
This video is amazing. So clear.
WOW! I never expected that you could make something of this quality from home
Thank you for your kind comment! I'm glad you were happy with the end result, we were!
I was budgeting the trip for training in your facility, then covid hold everything. Soon this is over will be there, thanks for the great contents.
That makes two of us!!
Incredible, very informative, thank you.
That's great, and it also looks so nice. Thanks for sharing.
great info :) .... I use a preval spayer to put on the pva release agent.... works real well. I usually spray 3 coats
Fantastic work, guys :)
Love the combination of different techniques and retro/new technology!
Glad you enjoyed!
These videos are so educational. Thank you.
Thank you, glad you enjoy them 😀
Good job as always Paul
Acetone vapour smoothing ASA moulds might be a bit of a game-changer with this..
hm you can smooth ASA w Acetone? Gonna try this.
@@csabalazar8937 and ABS but ABS sucks ;) Prusa did a breakdown on a poor-man's method here czcams.com/video/NiG1jDEG0kA/video.html
Then again with moulds PVB and IPA might be an easier/safer solution..
@@streaky81 Yeah just go with the PVB. Smooths fine and far better printability. Unless you are super confident in your ABS/ASA printing skills; but typically for a mold you are looking at sizable parts, so you because you got your benchy tuned in doesnt mean you are good.
Another excellent tutorial with two really small details that I feel are often missed and help to demystify working with resin: cleaning the shears (I assume you just throw the brushes as they're relatively cheap) and showing the drips after it had cured (i.e. not worrying that they're there)
Brushes can sometimes be reused if you clean them in acetone before the resin gels. However it needs to be a good quality brush as some of the cheaper ones, the glue holding the bristles dissolves with acetone so it falls apart.
3D Printed moulds are game changer for hobby parts or prototypes. Really need to try that. Although I need more light parts than glossy surface for model airplanes ;) Great Video, thanks!
I’m so glad I found this channel it’s so good
Thanks, glad to have you on board!
Awesome video, I've got an SLA printer, so the layer lines should be even less of an issue!
Hope you keep on doing a video a month! This is such great content. I've been watching for a long time, i can even remember when you had long hair.
That's so cool, I will have to try!
You guys are awesome!
You absolute champ, I was going to start a project like this next week, this is a fantastic resource! Thank you!
You’re very welcome Morton, perfect timing!
Thank you for the video, some very good tips.
wow my new favourite company
Waited for this topic to explain
Thanks you made my project easier
No problem at all, glad it’s helped you.
Thanks for a great video!
I learned a lot and the presenting style is excellent :)
You’re welcome and thanks 🙏
amazing and thank you! purchasing a starter kit
😀
I've been thinking about this process recently and now youtube presented me with this video.
Very nicely explained, professional production quality... Keep it up! Great tutorial!
Awesome guide, thank you
You wont believe
I was just showing my son(a mechanical engineer) a design to do exactly this for a part in my classic lomax 224 car
Perfect timing
That’s a cool car
I'm just starting out and this is the exact process I'm looking at doing!
Glad to help!
thanks for creating this tutorial. i havent really thought about using carbon fibre, because i dont have the gear, but this looks like something i could try out in the garage
Thanks Anton, yes, this is very much a process that excludes no one, even if you don’t have the printer you’ll know someone who does and the chances are they’d be happy to run a print for you, many people are just looking for genuine projects to use their printer on.
Thanks, I'm so going to try for more info
Hey Paul, I'm so excited for the new video(posted 7 min ago) I'm here to comment before I have a chance to watch it. Always Topp Shelf content!!! Thank you.
Hope you enjoyed it!
3d printing engineer here, just wanted to say that i loved the video! And maybe also to point out that you (hypothetical "you", as a hobbyist, not as a full-blown composites professional) could pay a lot more attention to printing to make the mould almost perfectly smooth. With proper design and a good thick 0.8mm nozzle most of such shapes can be printed in a vase mode, say, at 0.04mm layer height, and then smoothed with a bit of dcm or elbow greace. Or sprayed with some coating to hide layer lines completely. Or dcm-smoothed and then coated. Or acetone-smoothed (if using abs) and then coated. Or... you know, the list of things that can make a perfect mould is kind of infinite
Thanks for the comments and suggestions. In our other 3D printing tutorial we did demonstrate using an epoxy coating and the finishing to a near perfect finish; if you’re making more than one part using the mould then this is worth doing. For a one off, it’s often easier to do the finishing work on the part (because it’s in the positive shape).
Why not printing the part itself, bypassing mold stage completely?..
you keep surprising me ,well done
This was incredible. Thank you.
Thanks for your comment, glad you enjoyed the video!
Awesome video! Is there anything special when joining both halfs together? Thanks.
This is going to be awesome for custom parts on a race motorcycle
Another great video!
Me 4am: "what is this handsome man doing with resin and why is it not a useless piece of wood with colored resin"
It IS weird to watch this - where's the "pour", the LED lights, the planing of a slab of dead tree 40 times? And not one propane torch. Sheesh!
@@GhostRyderFPV 😂
Thank you Ewan McGregor, excellent content!
Excellent video!
Every Formula Student team out there, so thats a front wing mounting for you
Really excellent video!
Best video so far!
Thanks, glad you liked it 😉
Thank you for making videos like this
You’re welcome, thanks for watching.
Your videos are top shelf.
Thanks heaps for all your efforts. I’ve learned so much from you.🇦🇺🤜🏼🤛🏼🍀🍀🍀😎
Thanks Steve, always appreciate your support 🙂.
Impressive! Great video, great explanations! I'll try it, definitely
Thanks Jorge
This is why I bought a 3d printer! To make parts for my car!
Seeing the prices of "carbon fiber" parts these days that aren't even real Carbon Fiber makes me wonder how much I could save in making them myself, lol. This is the 3rd video I've watched from this channel and I'm hooked! Those starter sets are quite affordable, so I may dive into one and make something simple to start. If I don't suck at it, who knows where one could go from there.
it looks excellent! excited to try it someday!
Thanks for your comment, if you do please let us know how you get on :)
You are really kind and your explanations are very clear. Thanks you :)
Glad you enjoyed :)
Very good video. Thanks
Excellent video!!!!