ResMed Airfit F20 CPAP Mask: Fitting, Care & Maintenance
Vložit
- čas přidán 26. 07. 2024
- Mark Peterson of Live Well CPAP in Boise, Idaho explains how to get the best for on your F20 CPAP mask, how to disassemble, clean and how often each part should be cleaned.
- Jak na to + styl
This video helped me SO much. I thought my pillow had gone bad. Apparently I just needed to switch to dish soap. But also, the details on how to sit it on the nose were great. I’ve gotten 100% in my resmed app score the last couple nights! Thank you so much. Most helpful thing I’ve found yet!
@82rootbeer-Wow, that is amazing. I am so glad you are doing better.
Thank you for being thorough, and easy to understand. I’m struggling with my new Cpap life, and you answered so many of my questions.
Thanks so much Marron, we try! Good luck to you and your health.
This was the best video I have seen about CPAP in the F-20. I wish I had any instruction close to this when I started. Thank you!
I have the F20 also and I wish I had this video instead of the person who "showed" me what to do.
You saved my life! I too was wearing the mask too low.
Just received my replacement CPAP & F20 mask yesterday. I had a stroke after the recall. Your video has been a great refresher and provides the most helpful information. Thanks for sharing.
Wow, thanks Steve. That means a lot to us!
Thank you!!!! I didn't know how to attach my new face mask from small to medium and I watched your video and learned how to pop off the small and insert the medium!
Thank you so much. I could not figure out how to get the elbow connector off of my tubing (switching from an F20 to F30) and this made it so easy.
I never comment on videos, however starting my treatment journey and having woken up multiple times tonight due to mask leakage the fitment section of your video helped me find out what I was doing wrong.
He helped me truly. I learned I was wearing my mask sooo wrong and I didn't have to take the whole gear off to go to the bathroom...thank you 😊
@talenamcconico3059-it's funny how one little thing can be a game changer isn't it? I am so glad we could help.
Thank you for this video! I received ZERO instructions on my c pack. ( it took almost 60 days to get mine AFTER my sleep study. This was very helpful!
Thanks for all the advice. Well spoken
Many thanks mate for the maintenance explaination !
Thank you so much! My trainer did not say most of the things you touched on.
I just looked to see where you are located. This was a great video. I learned more from you then anyone since I started using CPAP religiously in 2008!! Thanks so much. CPAP equipment distribution has been taken over by businesses who see it as a cash cow.
@gillylovett7735-thanks for the compliment. We really enjoy helping others. The CPAP world is very, very confusing.
Thank you, had a heck of a time putting it on. Turns out the sleep center had it wrong. Thank you.
Thank you I have only been using a CPAC Machine 2 nights and have been struggling with the mask now I think I will do it correctly
very useful video, thank you. Learned my cushion/mask was too low and that was causing leaks. Correcting it I realised I probably had too smaller mask to so bought one size up and worked even better. It shows the value of having something actually explained to you versus some glossy corporate video or printed sizing chart.
@michaelholland709--Wow, that is amazing. I am so glad you are doing better. Thanks so much for the compliment!
So very helpful. This level of detail made all the difference
@weddingmom2000 I am so glad you are doing better. Thanks so much for the compliment!
This video is great. It answered all of my questions
Absolutely brilliant video. Thank you so much!
The fact that my doctor didn’t do this explanation for me is crazy, I’ve been trial and error on all my masks, thanks for saving me some time and pain!
We are so glad we could help.
Very informative and helpful. Thank you.
Thank you so much for the thorough video! I think your info will help me fix my leakage issues!
We are so glad we could help you Lori!
Thank you sir 🙏 for the video very helpful 👍on treatment now..first timer here. It's appreciated
Thank you for explaining how to seat the mask on the face, I just started with this mask and did not have the peak of the mask at the bridge of my nose, had it lower like you said many patients do, and it has not been working for me. Will follow your advice, thanks again.
tell you what mate that has been the best information i ha e seen on you tube it is invaluable.cheers dave from uk
Wow, thanks so much Dave!
Excellent video! Thank you 😊
Thank you so much for your help.
Very helpful video. thank you
Thank you so much. I've been having so much trouble with this for the longest time. I was wearing the mask too low! I was waking up with bruises on my nose because if I didn't have it that tight it would just leak. You're a sleep saver
Wearing it wrong. Wearing to low. Hope this helps me.
Yes, that is probably the biggest problem with this mask we see. Just bring it up a little higher than you think it should be😀
Oohh you've just made me realise I'm wearing mine too low. I was you tubing due to the leaks in my eyes so I will try tonight wearing it higher thank you
Thank you for showing this video. I didn't know that the nose piece can come off. I hope this is the cause of the air that I hear will go away. It started last week after I had clean my CPAP equipment.
Thank you for this video. It's very helpful. You got straight to the points.
We really appreciate your kind words
@leeanneduffy1837
Well done video and thanks!
thank You so much Learned a lot
Great info, thanks!😃🇺🇸
Thanks for the tips.🤩
Very good video,, well explained, answered all of my questions!!!
@rickybennett8216, thanks so much for the compliment!
I'm using the Fisher & Paykel Vitera full face with the large cushion works great.
That is great Keenan! We always suggest people stick with what they found works for them. The
Vitera is a great mask.
I use the AirTouch F20. I find it seals better after I put the mask on, turn on the CPAP tilt the top of the mask away from my face slightly. The air pressure will push the foam up on the bridge of the nose better. The foam shouldn't be bunched up under the top of the mask.
Thank you best advice I've been able to find many thanks Caz UK I'm actually terrified of using it but I'm going to try it tonight
How did it go?
Doing ok with it unfortunately my Dog Bennington Bates hates it on me 😂but still can't do an all night as yet but the nurse is happy that I'm trying to wear it as opposed to having panic attacks wearing it .. Thanks for asking 💜🙏💜
I only remove the mask to scratch my nose so that's a handy tip at 1:41! And the cleaning and fitment tips were great!
Por favor, en español. Gracias
@@mercedesrativa2988Quiere que hagmos los videos en espanol?
Very very helpful, Thank you
Thank so much!
very helpfull, my aunt is using this one but it hurts her nose bridge, people who got her that mask told her the incorrect way of putting it on,
Thank you!!
Thanks!
I still have some questions even with your great tutorial. I was fitted with a medium foam. First, my eyes are set closer together, so it sits nearly on top of the inner corners of my eyes. It also burrows into my forehead above bridge of my nose. No matter how tight or loose I set the upper strap, I wake up with gooey eyes. I have somewhat of a long face, and the upper side strap wants to sit on my ears instead of above them. I don’t know if that is causing air to leak on the sides and sounds like my cheek is farting! I have been tightening and loosening straps for a month. My straps on top go all the way to the back of my head in order for it not to leak out of the top. Lower straps are about 4 inches from the buckle thing to the tip of the strap. Do, I need to be refit completely, or am I doing something wrong? Or, does the F30i sound like a better choice for me?
Head gear I launder once a week by placing the head gear in a nylon stocking bag and wash with my laundry and dry it in the dryerI keep two on the go alternating them every week
Thank you..
Very informative. I have been struggling with leaks and the large cushion which the sizing template said I should use. I have been able to get the medium size to work but it feels a bit too small. This mask comes with 3 different headgear sizes in addition to the cushion sizes. I have the standard size headgear but wonder if I should try the large size head gear. I have been looking for sizing information on the headgears but can not find them anywhere. Might you have that information? Thanks.
If you are struggling with leaks, you most likely don't need a larger headgear but may want to look at a few other components first. How long has it been since you changed your cushion? The recommendation is once a month. You might be able to get a little longer life out of it but once it loses it form, you may find yourself having to strap tighter and tighter on your headgear. Secondly, if your headgear is 6 months or older, it might have lost it's elasticity.
One other common problem we see is that folks are not seating the cushion up high enough on the bridge of the nose. You can try pulling it up a bit higher than feels natural, the mask will be in your line of sight when it correct. Hopefully, this helps!
I hope they will make a F20 size XL.
Very helpful. I am a new user and found out the cushion part ( at least the silicon one ) may need to be replaced monthly. especially if it begins to leak more than expected. I was also not placing it well on my face, thank you for the demo!
And I expect shaving before placing the mask on may be a good idea as well. Comments on that?
Yes, shaving is very helpful. If you are okay with a completely clean shaven face that is ideal. If you like your facial hair just try to keep it trimmed up really well and the Airtouch F20, the foam cushion one, usually works pretty well😀
I push up on the mask from the bottom relieves the pressure of squeezing the nose
I have that mask, don't really care for it, made me feel like I was suffocating. I went back to full face until I can find something better. Any suggestions would be great!! TIA
triple thanxxx
How many sizes over the nose to crease in the chin are there for the F40?
Hi I just used mine last night and now I’m so confused what I need to wash. So only silicone mask needs to wash daily with detergent? And the elbows and the top frame only needs to wash once per week?
how often do we replace silicon cushion
Instructions I received say not to use dish soap. Specifically Dawn. It was recommended to use baby shampoo or mild Ivory soap.
My silicone mask has come off the frame. Can you show how to reassemble the silicone ? I have ordered a new one but it won’t come from Medicare for 2 weeks or Amazon for 2 days. Thank you.
Why do i have so much air leaking at the elbow? I bout the quietair elbow but there is still tons of air leaking out of the elbow. To the point it wakes me up on higher pressure. Any thoughts?
Just got this, using nasal pillows before, got 20/20 seal, events 3. so all good, except-- and maybe you can suggest solutions, throat gets really dry in the night, wakes me up to get a drink. Using the memory foam cushion. have resmed airsense 10 with humidifier, so ?? thanks B
Perhaps turn the humidifier up?
How do I change the size mask from a medium size to a large which was included in the f20 box we received? It came attached to the strap and magnet apparatus with a Medium mask affixed. Also in the box was both a Small and a Large mask by themselves. On the S and L masks they do not have the proper housing for the 4 contact points (the 2 magnets plus the 2 other contact points) also the hose nozzle opening on the S and L do not have the same inner lip raised edges as the Medium that came already affixed. Are these S and L for demo sizing WITHOUT ACTUALLY applying to the straps? Thanks in advance for any help switching the Med. mask to a Large mask.
Hi Bill. If you forward to about the 40 second mark, I show how to squeeze the old one off and then how to put the new cushion on. Keep in mind if you are swapping out just a cushion, it doesn't come with the hard plastic piece (frame).
Bill wasn't the only one! Appreciate it. It looks like one piece both the frame and mask. I had to watch several times. It looked so easy for you, yet some kind of sleight of hand magic trick to separate the two pieces without breaking it. ~ The cleaning info was a bonus!
I don’t understand what it mean by 20/20 leak, I have resmed air 10 what is a good number (Safe ) 0:04 for leak?
Should you be able to open your mouth wide? Pretty sure I got a medium from my provider, because they were out of larger.
Hi. I have the Resmed 11. I need to get a heated hose. The only ones I see are for the Resmed 10. Will the fit be the same? Thanks.
I have the heated hose,overrated the warm air can make it difficult to breathe properly. Good luck
Thank you good Sir I didn't break my face mask 🤦♀️
I lost my swivel elbow this morning. I have no idea how.
Hi another quick question if i may, been using cpap for 18 mths, lots of trials with pillows, nasa mask etc, and seem to have it running well. Sometimes the seal is 10/20. 12/20. and got focused on the seal, however, those same nights I would have events as low as 0.5. or 1. and 1.5 so the results are good the seal not, so I actually don't get too fussed with the seal, so long as the results are low, any thoughts ? cheers B
Hi Brian! If the leak is too high the machine cannot properly score respiratory events. With a higher leak, your reading of events may not be accurate. The 20/20 probably gave you a more accurate event AHI reading.
@@LiveWellCPAP Tku
The CPAP mannequins behind him made me think of facehuggers
My f30i keeps slipping under my nose
whatever I do, the mask still leaks with high pressure which makes it useless. I think some work and research should be done to overcome this major problem.
I noticed that to
i've had the bottom strap pop off the magnet. what could possibly cause that? thanks.
Is the velcro coming undone or did the magnet break out of the plastic?
@@LiveWellCPAP the magnet popped off. I thought that was really weird actually.
Hey, also I really appreciate your quick response. Thank you so much!
Hello. Hi there. My name Sharly and I Watching u from Kuala Lumpur Malaysia. Currently I am using this Kind of mask. But unfortunately the Mask celicone cushion is tearing. How can I fixed it back. Can I use an oily glue to attached the cushion back to it place? Tq. Sorry my English is too bad not so fluent. 😂
@sharlymoharramli5028 Hi there in Malaysia! Sorry, I am just getting back to you. It sounds like your cushion is worn out enough that the only fix is to get a new one. I wish there was a way for you to get more usage to if it, but unfortunately we find that at about a month out they start becoming less effective.
I have the silicon mask … can I clean it with baby wipes Instead of soap and water ?
Yes, absolutely. Just stay away from any wipes with alcohol in them because it will break down the material quicker.
@@markpeterson4827 Great! Thanks a lot. Also, Do I have to fill up my water chamber every night? - I usually fill it up all the way to MAX section but I end up only using half of the water. Does the CPAP require water all the way up to properly work?
Nope, it is not necessary to have it completely full at the start of the evening.
I’m new to the silicon mask. I’m so confused with cleaning process. So should I clean all the elbow and mask with soap and warm water daily? And the tube and headgear weekly?
I have been wearing the same brand, same mask “TYPE” for over 10 years now and suddenly within the last couple of months my score have taken a nose dive… Seriously I can’t figure out why suddenly my mask doesn’t keep a seal… 😢. Does one’s face change so much that they can no longer wear the same mask???? I know as we age we settle like an old house but OH MY GOODNESS 😞
Either you need a new pad, or you need to wash the pad with soapy water to clean off the oil from your skin.
Did he just use the words “ bed partner “ and “ pull out “ in the same sentence ?
THE PROBLEM I'M HAVING IS THAT IT IS COLLECTING FUZZ AND WATER IN THE ELBOW IT IS UNSANITARY ANND DISGUSTING. HOW CAN I CLEAN THAT PART???
Is there any reason why anybody would engineer a mask with magnets for patients who would tend to have more pacemakers than the average person?
Good question!
Those of us who have had strokes over struggle with straps. The magnets make it so much easier for me. Hope you've found a mask without magnets.
D
To mi prpalo celokuno za nos i crevo kako bi stigli u kotat cena
Get an AirTouch cushion and be happier.
yes thank you indeed. i do not know why the people that is to train the patients do not cover all aspects. My trainer asked me if I had questions?. i had one question, after that, the training ended. This is not right. Everything i learned was pretty much was on you tube and reading through the many supplied materials. This experience does not leave me confidence in the product or the company.
Srbija cena
Try not to use alcohol or the rubber seal will come away.
@rafal5863, thanks for mentioning that. You are absolutely correct!
Thank you Jeff bezos
Dear ResMed. No one should struggle so much with this, non-conductive TO SLEEP. Entirely Counterproductive! Miserable. No matter what I do.
Hi Margaret, we are so sorry to hear how much you are struggling. Do you feel like it is more of a mask or machine issue? Sometimes it is hard to pinpoint. You might do better with a different mask or your CPAP pressures may need to be adjusted.
Sbija i koko kosta kako do kotata
Adjusting my CPAP pressure and positioning correctly on my nose made ALL the difference for me.