3 Months Till Launch. There is NO Time To Waste. | Wildling Sailing
Vložit
- čas přidán 22. 06. 2023
- Well, Mahi means work in Māori, soooo….
My Instagram: @boat.fella
Facebook: / wildlingssai. .
Business Enquiries: thewildlingsofficial@gmail.com
Thank you SO much to the incredibly generous people who use the links below
PayPal: www.paypal.me/wildlingssailing
Ko-fi: www.ko-fi.com/wildlingssailing
Patreon: / wildlingsailing
I hope you like copyright-free 80’s style music.
Thank you, this is what my life needed 🙏
I can tolerate the music but it is bad
The 80's music is somehow fitting!! I like it.. I've been following you a few months now. I look forward to seeing your progress. You're doing a great job!
80’s music is better than todays music anyway😅
It's like, "Refit 2, electric boogaloo"
It does look like a lot of tedious work but your living the dream my friend. Im stuck in a condo in Bangkok 24/7 and I wish i could be out there with you doing these sorts of things. There are doers and there are watchers. You're a doer my friend. 👍
Fewer thru hull fitting the better... None is the best.. In my humble opinion. Peace man Rolfie
Mark your mum and dad are so proud of you, and must be thrilled to bits that you are living the best possible life you can. They are such lovely people, and you make them so happy.
I enjoy these DIY builds. Im a shipwright of 15years and Its a fun trade. You are doing great and MAHI is looking terrific! Oh and when mixing in colloidal silica to thicken you epoxy you can add it to your own preference. It will last longer too. I like it to be no thicker than caulking or peanut butter. if its too thick it gets crumbly. We thin our epoxy with acetone ( just a little. I think it was no more than 10%) when we are just coating to seal wood. it penetrates deeper, and you can always scuff and re-coat with thicker (normal batch) to give you an even more superior product. Its great watching you learn this on the fly. fun stuff. Cheers from Portland Oregon. I subbed ! Lets go 100K!
For me, a modern see toilet is indispensable. Simple, effective, hygienic. I suggest not putting the new through-hull fittings in yet. Wait until you've painted inside and out.
I believe that good quality bronze fittings are very easily renovated and re-used do if you want to stick with bronze, consider renovating the old ones
There isn't any other cat im rooting for more on CZcams, that this guy.
Best show on the Tube, week, after week.
Don't knock yourself Mark. If you get as much as that done every day then progress will be good. If through hulls are a potential for water ingess and you don't need them why not just block them up then you won't need to worry about them in the future. ❤
Spot on Athedoomhamer6050, the best way to avoid through hole issues is not to have them. Wharram's were designed to be minimilist and avoid problems arising from complexities, then what does the builder or subsiquent owner do? Complicate things and induce problems! One needs to think of a Wharram as a floating back packing tent. Ultimately cheaper and less work long term.
Mark, you’re looking so much more confident on your fiberglass work. Your making good progress👍👍
And we are off, like a herd of turtles! Just kidding Mark. You are making great progress! Great to watch the boat evolve.
Dunno if i posted this last night as i was very drunk ASAP Supplies complete fitting is DZR apart from the handles which are stainless steel. HIC...
Being the owner of a steel Dutch built Boarncruiser here in the UK, I really admire your patience and perseverance! Keep going matey and your dream will soon be realised 😎
My personal preference would be for no through hull fittings below the waterline. Dry toilet and all grey water pumped up and out of fittings above the waterline.
Agreed. Generally speaking, ANY hole below the waterline is a bad idea! The more I see of this boat, though, the more I realise that Mark's instincts seem to have been spot-on. Mahi is basically a soundly built boat and is worth the effort he is putting into it.
Spot on. Glass those through hull holes up Mark!
Agreed. Save some future headaches and plug those holes.
Yeah, through-holes below water line is just asking for trouble/maintenance issues.
Why would you want tubes runing up the side of your boat . Youd still have to drill holes .
Hes already got the holes cut . Much less work to put new skins and sea cocks in .
He may look like a hippy , but he doesnt have to live like one !
So many positive comments, I absolutely love it, you’re doing great just keep chipping away and you will soon see the rewards for all your effort.
You should use a fiberglass roller, to get the air bubbles out of the fiberglass!! It's makes a stronger repair👍😎💙
I would suggest you close up all the thru Hull openings. You don't really need them. It would save you a ton of money.
Yes
I agree 100%. 👍
1000 percent. No thru-hulls below the water for the win! Run it all into a sump pump with a filter and pump it out through one a above water thru-hull
I agree. If you don’t need them then cover them over
@@CaptainDustinAllen Same, we've closed ours as well, we only have two above the waterline... I don't trust holes under water haha.
The less holes the better. Simply depends upon your needs. Trust me your needs will change but it is wonderful to watch your determination and ambition.
What a shame that the rot had to be in such an awkward spot, great problem solving though and another great episode!
I cant think of a worse possible place for it myself 😂
The good news is. If that's the worst possible location, it's all gravy after that.
80's music was a nice touch! Glad to see your progress, would personally agree with your idea of only having above waterline through holes!
It's hard to stay motivated when you feel you not making progress but from where I sit in Cape town,you are accomplishing much and doing the repairs properly.keep on going mate❤❤❤❤🎉🎉🎉😊😊
May I humbly say.....your skills have dramatically improved in the past few years....congratulations 😊
Absolutely fantastic job on that rotten piece, been with you from day one and I’m so happy your not far from one hundred thousand subscribers 🙏
hey when doing taping in the future it can be easier to wet out the tape outside the job say on a flat surface on some poly sheet..that way you can build up several layers and also put the peel ply on and get rid of most bubbles..then transfer the tape and peel ply to the pre wetted job site and smooth the whole lot on with your auto squeegee…that way you know the tape is properly wetted out and peel plied and it’s easier to apply like this..less messy…then don’t forget to remove peel ply for a perfect surface once it’s cured..
Wow Mark, you sure are making it happen and doing it the right way in removing suspect rot, etc, It would also be nicer still if West Systems sponsored you like they do on a certain other Ship rebuild Vlogs.
Definitely close up those holes. No inboard and compost toilet means no need for holes waiting to cause problems.
Get a composting toilet. Saves you all the trouble. I hava had mine for six years now, living full time onboard. Airhead.
Seal all the holes and the ones you need, bring them out above the waterline. Or glass in a proper seachest were you fit the valves
I’ve used the pumps with west system and makes life a whole lot easier. A good tip I was given is to use icing bags for injecting thickened epoxy into small gaps. They are cheap to buy and you can snip off the end just a small hole so can fit in between panels and get the stuff where you need it. DZR is what you are after. Trudesign better but obviously space is the key. I always like adding a ring of ply fibreglassed around the through hull to beef up the area. I agree with you, sink can drain out above waterline 👍🏼
The one problem is they can freeze up more easy than below ....and they need a spout to keep the waste from splashing the sides...chemicals can attack the hull coating.
Limit your hull holes and make sure they are always where you can get at them in a hurry Mark ‼️ nothing hidden and hard to reach...plan carefully.🧙♂️⛵🇬🇧👍🏼
The 3 in one multi tools combining rocking plunge saw and detail sander heads are amongst your most valuable power tools on a composite boat.
You learned a lot when you worked on Menke and it shows. I liked the background music.
Hi Mark, It is clear that Mahi's builder did a very good job, and now Mahi has a competent owner to finish the job. Well done, and thanks for the video !
Great to see you advance to bring Mahi closer to sailing, thanks for taking the time to explaining all the progress. Good job Mark.
A lot of energy and sweat went into making this video. Thank you!
That hull repair is looking very good , I like the fact that you sealed the plywood with epoxy first , I wonder if you should have ground a wider strip back to epoxy , but that’s a question for the experts , not me who likes to over engineer everything 😉 and I’d vote to get rid of the under water thru holes if possible 😃🍻
Way to go Mark! I am glad you have extra sets of hands around when necessary. I'll take any music you serve us. What you are doing is amazing.
Brilliant filming, love the music and great workmanship. Well done Mark👍
My Wife and I have a 42 foot Hitchhiker, same build method as Wharrams, for the last 26 years. We just did a complete refit about 2 years ago. I also changed all the through hull fittings. The valves you have there are more than likely cast stainless and if the valves open and close they should be fine to reuse. We have 3 through hulls, 2 for toilet and one for a salt water pump in the galley. So I would close the ones you don't need. I personally would like to close all of mine but it's not possible. On the other hand we've been sailing around in Australia for the last 26 years and never had a problem with the through hulls. Looks like you've bought yourself a good boat, it'll be awesome when you're finished. All the best.
HOORAY, its Mark O'Clock, look forward to your video every Week, miss it on the occasions you are not able to post. Suppose it is not a bad thing to be hooked on though. You, and lots of others who do similar things are a great entertainment to me. Thanks again, not easy to do what you do, even more difficult considering all the camera work too.
At One stage I thought you had VERY long arms like Mr Tickle, then 3 hands 🙂great to see you are getting so much help. That was in a PROPER awkward place, I can see ow it i wasy to remove the Rudder easily buy wow what a spot. Of course in an ideal World, lets say you had built the boat. It would never have got in that condition.
You're doing an amazing job, Mark! You've overcome some trying times including criticism from CZcams followers. Throughout these times you've handled yourself with maturity and class, you have my utmost respect, you seem wise beyond your years. You're a machine and I'm excited to see where you'll end up with Mahi
Really glad you're on land now after your first sail.
This must make the re-fit and everything a 1000x easier for you.
Thanks!
Another amazing episode, fantastic cinematography with accompanied music. Making Mahi seaworthy is a must see video. Congratulations Mark, this project is a true adventure.
A well deserved beer in so many ways. A true legend!
Don't put yourself down or the work that you've done. Good work takes time. It may not seem like you got a lot done (end product wise) but you did do a lot of pain stakingly detailed (and cramped space) work. You will be glad you took your time and did it right when you're out on the water, knowing that you don't have to worry about it..
Get yourself some of those hard-flexible rubber squeegees that they use in the automotive industry. They work great for forcing epoxy/polyester resin into tight places and they are reusable.
Love the retro Casio and the Worzel Gummage hairstyle.
This episode reminded me of the A-team, when they would build a jet fighter out of lawnmower parts…maybe it’s the era of music you’ve moved into this week!
you are an Amazing human Mark My wife & I love your video content keep up the awesome work! you are truly an inspiration!👍
I envy your drive and motivation to do this catamaran. I’ve sailed a little on a 72ft ketch many years ago, what good memories. Am loving watching the back catalogue. Your stronger than you think mark. Well done. I love the diy vids.
Well looky here, we got us a new Sail Life rebuild show... LOVE IT! You learn so much from watching this type of stuff. Your going to have one kewl *** boat when you get done Skipper. Keep at it and youll get there
Well done. Each day you can tic off and you are closer to your ability to launch. Bravo.
Quality beats quantity every time. Good work Mark!
You've got to have a composting toilet (or other self contained system) on a wharram, because with a wet toilet you can't flush if you are dried out! (unless you flush with your drinking water!) Ability to park on the beach is one of the greatest strengths of the wharram approach. This didn't occur to me until just the other day because there are so many other reasons to have a composting toilet
So cool to watch the progress you are making Captain Mark. You asked for comments but only thing I could say might help if you haven't already thought this through is work from a big picture scheme and don't just do it by the seat of your pants. Like I mean if there is a deadline of 3 months work out the jobs and divide it into 3 goals a month each. Something like that, and leave like a month for the finishing on the last month but you look like you got it covered. I would definitely be working to a plan but segmented so you don't need to be thinking of all the details of some of those jobs and also gives you space to pace it all. It's such a cool project you got Mark. Congrats on the place you chose to do it, Dutch people seem really cool the way they are so giving and helpful.
I look forward to your videos every week!
I'm no sailor, but I've got common sense, and I've always thought it's a bad idea to make holes in a boat!
If there's no hole, how do you get into it?
If there’s no hole, where are you going to throw your money?
Some are a necessity
@@benmac940 I don't agree, there's always another solution, and you can always use pumps! It maybe more work, but it gives great peace of mind!
@@waynedrummond6583lol
You are doing an amazing job Mark!!! So satisfying to see your progress and your positive attitude. Keep up the good work!
💪 Time for a 80's montage! A lot to be done, good luck.
Mark , I mentioned once about your previous fibreglassing skills and I'd like to take it back and say out of 1 to 10 skills I'll give you a solid 10 for effort . Well done !
I am constantly amazed by your skills and determination. Well done, I look forward to next week's video.
I have used WEST System pumps for decades and always had good results. keep up the good work, you will be sailing soon
Blimey, that glass taping almost looked professional!!!😊 I’d definitely be inclined to give it a couple of layers of cloth - just relying on epoxy coating & paint won’t really give it decent protection against rubbing if/when you raise the rudder.
Otherwise, excellent progress; at this rate you’ll be back in the water for the end of July!,
Youve come a long way. Every hard won lesson makes the next step easier. I cannot quite believe how good the hull is. Brilliant!!!!!
In the tight spots you’ll have more space to work by taking your watch off. Just thinking about wet weather during your build, an old sail over the deck will give you a dry area to work in and set up a bench to work on. Maybe give you a bit of shade when it gets hot too. Brilliant episode. Thanks for all your hard work editing.
Start from scratch Mark. Get rid of those holes and then make the least number you can get away with (1?) In an easily accessible location. Ask yourself what they are all for and could you use one and some small hoses through the boat. Cheers
Exciting stuff! So nice to see the boat choice is panning out. You're well on your way to living that dream... well in fact you're living it already!
Amazing project, getting better and better
After the hard slog grinding away in that remote mud-bog, it has GOT to feel damn good to be on the hard, in decent working conditions with infrastructure around you- able to make good progress with efficient return on your effort. You hard earned it my man! Empathy pains are gone... even I feel relieved and able to breath freely watching.
Yes mark west system is the best but expensive but worth every penny when you get a bad storm and every thing holds up well worth it and if you don’t need then fill in the holes with1708 and twelve to one ratio on your your thru hole holes grind a angle all round the holes six inches and then a backing on inside JT it’s five o’clock somewhere bottoms up 🇺🇸🇺🇸🐟🐠🎣🛥🇺🇸🇺🇸
That rudder box was a sod, but such a great job in a really tight space. Looking great Mark, keep up the fantastic work.
Lots of progress. You should consider making a plywood rudder cutout, that you can store on the boat and use as either a template to build up and replace a rudder, or figure out how to rig a replacement at sea, in the event Orca's attack your rudders. Watching you pull the rudders out, you could definitely figure out how to do that at sea if you had too.
yep spares come in handy out at sea.
I concur, they look a wee bit light and vulnerable. Very replacable at sea though. ye dinnae get that on many boats.
Nice job with the replacement panel. Onwards and upwards.
Such amazing progress. Not screwing around! It seems you’ve got solid plans too.
Hi Mark - I wonder if you saw the two lugs inside the bore of the skin fittings? They let you put a wide bar in there like a shifting spanner handle to turn them and extract or install from the outside. you don't have room to swing them around full circle on the inside, but you don't need to if you are installing them from the outside.
This is coming together really well..!! It's going to be so solid once you are done..!!
I have a composting toilet on my 38 footer, and it works really well - no smelly holding tank. I would recommend using one.
This is great fun, right?
Clever job on the musical score pausing with each “what the heck” moment and then dashing back in white continued action.
Art work much appreciated
A tricky and interesting fix which was really good to watch! Loved the music too. Great to see you happy and making progress with the help of others. Looking forward to see you breathe new life into the fantastic Mahi! Best wishes from Fife, Scotland.
Good work Mark. Use lots of epoxy and fiberglass in that area so you don’t have to go back and fix it in the future.
great Video Mark love it when a plan comes together great
Getting things sorted, making good progress. That patch of rotten ply was tricky to sort out, but looks like you did a good job!
Mark for the skin fittings it is a good idea to fill the hole with epoxy and re-drill the hole, no way of rotting. Anywhere there is a chance of getting wet or light immersion all fittings and screws into any timber should be done like that. Should have fiber glassed the panel before you fitted it and it is fairly paramount to do it, especially there where sharp creatures can live, several layers would have been good.
Well done Mark that repair looks like she'll last at least as long as the rest of your vessel, so in other words decades.
You've got this and yes Marine Thru Holes are expensive for the good ones but considering they can literally sink you new home best to go with the best you can afford.
My hats off to the others in the yard lending a hand or tools or both, good on y'all.
Fair winds, following seas, safe travels and God Bless...
Props to you. Aside from the boat work your video/editing is getting really good.
You did it! 80's music is rad!
Top job Mark. Don't underestimate the amount of work you did just now.
Could have watched an hour of that and not got bored.
Good Music Mark and it looks like you are moving right along, am glad you have a nice bunch of fellow Boat repair people around, nothing better than reciprocal help.
You can get away with no underwater through-hulls if you are feeling spendy. Put in a holding tank and a Vacuflush toilet. The toilet will use about a pint of fresh water per flush. You can empty the tank through the standard deck fitting, or pump it overside with a discharge above the waterline when sufficiently far offshore. Your sink can also discharge above the waterline or into the tank.
You’re doing good work Mark. That glass work will be just fine, bullet proof. And I’m loving the 80’s vibe, graduated high school in 84 and find myself listening to 70’s-80’s music a lot lately! Keep up the hard work, you’ll be back in the water soon.
The pumps feel expensive but are worth it. Another thing that will save you a lot is to buy the epoxy in a 20L container, it becomes MUCH cheaper in larger units. Just sell what you have left over when you leave the boat yard! (if there is any left!)
Wow you're really making progress. I love your rudder system and the ability to repair a crazy killer whale rudder attack. Blessings from Southern Oregon
Your doing a bloody good job mark love your videos looking forward to seeing what colour you choose for the. 2 hulls 😊
Great vid Mark, all the vid work and clearly loads of work, u r one busy guy. Thanks for the effort and I am sure Mahi will take you far once you are happy with your repairs 👏👏👏👏
The music is great Mark, lovin' it. Again, your channel has changed since you made it to the yard, a positive one at that, really lovin the content these days.
The music was great, it matched your cool watch! 👍
I grew up in the 80s and loved it no internet or cellphone we played video games at the arcade unless you were really lucky to have a Atari but most of us didn’t have a tv 📺 in our rooms 😂you knew everyone on your street we all had hunting rifles and no one was killed we played with lawn darts 😂and survived please don’t play any new kids on the block lol
I was yelling at my device about your repairs Mark. But you redeemed yourself towards the end. Keep up the great content Dude. Remember to pre-wet all surfaces before filling with filled epoxies.
I love the 'waterworld' plant. Keep on going, you're doing great with minimal tooling.
Well done Mark...I remember 1000 subs 😮
You've got a work ethic to envy: keep it up and good luck
Keep going ,it looks all good so far,a little patience goes a long way.
When I first heard the music I got very excited!.......But I was eventually disappointed. Not a single plumber with handle bar mustache and sunglasses. And No lonesome middle aged housewife....Apart from that, awesome video 👍❤
Kevin Costner would be proud of your citrus!
Don't forget after a long hard day to remember how far you have come!!!
You are the place I go to calm my mind thank you for the peaceful content
So happy you got it dry docked was very cool adventure. Loving the progress and video format of this video also the music was great too, keep up the awesome work 👏👍
Keep knocking out a little every day and before you know it you'll be back to sailing her.