WHY DID FORD MAKE THIS SOO COMPLICATED?
Vložit
- čas přidán 5. 07. 2024
- PDS Debt is offering a free debt analysis. It only takes thirty seconds. Get yours at PDSDebt.com/sleeperdude.
In this video we are building the very popular 5.0 Ford roller motor. They made the Windsor V8 engine from 1961 to 2001 in cubic inches ranging from 221 to 351 but most of them being 302. We plan to double the horsepower of this one with upgraded heads, cam , intake, headers, along with lots of other go fast parts. Let's get this thing ready to go in our 63 Fairmont Sprint clone.
#builtwithsummit
#poweredbysummit
Check out @SummitRacing for all your performance parts needs!
Here is a list of the parts used in this build
MEL-68-S Melling oil pump pickup tube
DOU-D660YA-B Dougs headers
SUM-G1583 Summit freeze plug kit
SDK-B-F101 Scott Drake engine pulleys
SUM-G6335 Summit timing cover
GMB-125-1420AL GMB water pump
SUM-250004-1 Summit fuel pump
EDL-7521 Edelbrock intake manifold
PNX-D7130710 PerTronix distributor
NGK-4091 NGK spark plugs
MRG-6861G Mr.Gasket valve covers
MRG-7120MRG Mr.Gasket gasket set
SUM-K8902 Summit cam kit
PIO-PF-580-4 Pioneer Thermactor plugs
ARP-254-3708 ARP head bolts
SUM-G3867 Summit dipstick
SUM-163302 Summit harmonic balancer
SDK-C2OZ-6023-B Scott Drake timing pointer
Merchandise available at thesleeperdude.com/shop
Become a boosted member to get behind the scenes updates and priority response to your comments / @sleeperdude
Check us out on
/ sleeperdude88
/ sleeperdude88
www.tiktok.com/sleeperdude88
our 2nd channel @Sleeperdude2
our 3rd channel @sleeperdudearmed
Or Send Fan Mail to PO BOX 3411 Riceville Tn. 37370 - Auta a dopravní prostředky
PDS Debt is offering a free debt analysis. It only takes thirty seconds. Get yours at PDSDebt.com/sleeperdude
Hi 👋 GUYS 🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰♥️♥️♥️♥️♥️♥️♥️♥️♥️ LOVE YOU GUYS YOU GUYS ARE MY FAVORITE SHOW
Are they Dave Ramsey approved?
@@darrenswails I looked into them, from what I can tell, you pay them your debt Ex 10K, and they ask you to default on your credit cards/lender, then they negotiate(buy) your debt at a reduced amount. You still pay them the 10K while they buy your debt at example 5K. Your credit takes shit for the next 7 to 10 years. The upside is that you won't pay all that interest which could be 80K if you continued to make minimum payments. I got as equity loan instead.
they might call me crazy, that i spend over $1.000 on a rv that was free. big block 440.
Can we take a minute to acknowledge the fantastic camera work marge does week after week❤❤❤
Thank you
Amen to that, we would be lost without CZcams favourite mother
Yes, absolutely ☺️
She is great! ❤ Y'all are great and I love watching your show! You feel like family to me 😊
Yep, Tosh is good with the camera angles...Shirley for sure.
We need a manufacturer of paint booths to sponsor Sleeperdude, because we know Squeezie is going to require her vehicle be finished to a much higher standard than normal.
That’s right
OH! ABSOLUTELY!!
For Sure
I'll agree that's a given a talented one of them all
Good point there!👍
First, I'd like to say that you are the only CZcamsr that I've seen take a moment to celebrate Joe Elmore. Thank you for that. I grew up with him, too. Second, I'm fixin to put a 302 in my Maverick and this is EXACTLY what I needed to see! Part numbers and everything. Thank you! I just hope I can replicate your results. Thanks, Josh and Fam.
Thank you. I’m glad you liked it
Josh..did you grow up watching Shade tree mechanic guys?.....always loved to watch them and whatever Stacy David was building on his show.
I think it's great that you show kids can be hand-on with your builds and it isn't only blokes that enjoy working on cars.
You really do make a great teacher SleeperDude.
That little 302 is going to really light up the Falcon. I've been waiting to see the V8 swap come together on this car. The Falcon is going to be SO SWEET! Great video Josh and family!
It's good seeing Squeeze get her appetite back after her run in with being sick.Same with all the chillin.
Love your show ,PLEASE never change your fast forward music. It's sounds old school, and is relaxing, not some of other channels crazy rock music. I watch you and your family over and over, calms my PTSD. THANK YOU. 🙏🙏🙏🇺🇸🇺🇸🐏🐏🐽🐽🐖🐖
Joe Elmore was a big influence on me and my car guy journey. We didn’t have CZcams in the 90’s and early 2000’s. Saturday morning car shows like Joe’s made a big impact on today’s mechanics and car guys. Salute to Joe for helping blaze the trail.
I love the way Wawa looks at her father; such adoration. You are a good man Sleeper-dude!
Thank you very much!
Sleeperdude out here making Saturdays great again!
You already know!
I’m running stock 350 in 84 Chevy truck had to block return off of mech fuel pump and it runs fine but now I get 5 miles to gallon got any ideas ? It ran out of gas when it went to shift to second I’ve replaced fuel pump on block twice with precision pump
I think you're going to have a return.
Its Sundays in New Zealand
I remember hotrod TV and horsepower TV. I'd watch them every weekend
😂😂😂
For all the wrenching, fixing and building y’all have done… for Ralphie to say “what’s that?” To red loctite… 🤣😂 THATS funny!
He’s a mess
When Josh was carrying Squeezie and she squawked it sounded like her mom! Man, I was a Ford guy but didn't know about all these differences. Rebuilt a 289 and dropped in a 65 Fairlane that had a 260. I must have lucked out on timing covers/ waterpump and timing chain because I had no troubles and it ran great.😊
Thank you
Friend of mine took a dressed 396 engine and put a glass table top over it as his living room coffee table...it was pretty awesome! Your rebuild is looking fantastic - can't wait to here first firing!
Laughed so hard at Sqeezie eating the vanias and gagging. Kid is too funny. Thanks for the wholesome content Sleeperdude family.👍👍🇨🇦
She’s a mess
Gotta love a family that shares RC backwash!
Exactly
Put together a 302, back when I was in high school. Cost me a fortune then. Had only 15K miles, on it. On a very cold morning. Just as you mentioned. I twisted the factory oil pump shaft, which lead to a disaster. An expensive lesson for me to upgrade that part in the future.
Great video, guys.
Josh you should have used the weak springs to set your push rod length, to check for proper valve/rocker geometry and for the valve to piston clearance. Remember your lifters have no oil pressure and will collapse under stock spring pressure.
I love watching you sir and the kids learning life skills. I love that
I appreciate that
@@Sleeperdude your welcome sir. Please tell the family I say thank you
Great job on the engine build. Who knew how many versions of water pumps, timing chain covers etc on the 5.0. Thanks for info.
Yes it’s crazy
THAT WA...she's my fave...if she worked in my shop she'd realize you can be totally unhinged and still turn out some of the fastest Vdubs on the Left Coast...Wa is most impeccable...love your guys channel.
Poor Squeezy gagging over the Vienna sausages 1:10:18 mark.
Awesome build thanks guys.
Best CZcams channel on the planet
Ikr, the first one went down fine, the second one, not so much lol.
I get it though, once you remember you're eating raw meat from a can, and that it's more lips and bums than actual meat, it's never going down easy after that.
They'd probably be way better if you threw them on a bbq and got some grill marks on them, make em look like you're eating real food lol.
I didn’t realize that over the years that the ford Windsor has 6 different timing covers I knew about the regular rotation and reverse rotation water pumps but never knew of the short water pump towards the end of production. Thank you for explaining this I learned something new about SBF. Can’t wait till it goes back in the Falcon.
Glad to help!
Very nice tribute to Joe rest in peace. Great work and video SleeperDudes
"The life of a Ford parts counterman is not to be envied".
Torquing bolts in sequence is EXTREMELY important! If you don't, you can cause them to twist and/or warp. This will cause bad compression and can cause coolant to go into and out of the cylinders.
ALWAYS follow the tightening sequence!!!!
Ok thanks
I remember when I was a kid watching my uncle fully braking down a motor form a 1974 Trans AM. He painted every part of the motor a different color, and put it back together. He called it his Picasso motor I thought it was one of the coolest thing I ever seen. I'm 41 years old now!
So cool
I watched joe back in the day learning about horse power from him but it’s a loss to all gear heads and body workers
Rest in peace ☮️ Joe !!!!
Alot of the guys that have been on the powerblock/powernation have youtubes
@@waynerohde1036 yes
Yeah
Joe was a great guy and an influence on me as well. I met him at Cecil County Dragway in Maryland during an event. He was a true car guy. RIP
Yes! Very cool
Joe Elmore had the best voice for TV and could explain anything.
Yes
Man I absolutely love those OHSA approved slip slops .
Exactly
Can't wait to enjoy the episode
Thanks
15:10 insert Stayin’ Alive here during the pig walk. Lol.
🤣🤣
Rip! Lizzy Musi. A racing legend.
Absolutely
Man this video brought back a lot of memories from high school helping my buddies with their mustangs doing cam swaps with the “alphabet cams”
Yes!!! Good times
It is amazing how quickly the channel has grown since the old place, quitting your job full time and going full time. Summit racing is a great place , The one in Ohio is the oldest Flagship store, and I was buying stuff from them for decades also since the the late 80's. I finally got a 88 Mercury Cougar XR7 with the 5.0L engine and it only has 50k on the clock. No rust anywhere and I got it from a 90 year old man who kept it in a climate controlled garage since 1995. They put a entire new stock fuel system on it tank, lines, pump, sending unit, filters, everything. Wouldn't run for more than 15-30 seconds, they put a PCM , 8 new/used injectors cleaned the EGR. Same thing my Ford guy at work told him, they were going to scrap the car after they told him what it needed to be fixed. I was fortunate enough to get the car for south of a thousand dollars and I replaced the fuel injectors with 8 new ones for a 89 mustang 5.0L and it fired right up. Needs a upper intake gasket and the lines finished underneath due to a small vacuum leak and I will have a great little runner. I'm going to build a engine for it and I will be using some information and tips from your channel Josh ! I hope you have had a great 4th of July weekend and I will be watching to see how this motor turns out. Thanks for sharing as always and have a great day today.
He was a mentor of tv n hotroding ! He was a pioneer n we’ll miss him a lot ! I was an hot fodder from Paterson,Pa n No. Philadelphia, Pa
In the 70’s to the 90’s !
Yes!!! 👍
Sleeperdude, the other side of caliper measures in the inside of something. Such as the exhaust ports. Hahaha. Sorry I had to educate if you didn't know, which I am sure you do know. Can't wait to see this engine ROAR to life! Ford guy here!!!
Yes thanks
Yep three side on the calipers
outside =big side
Inside= pointy small side
Depth=long end
Can't wait to see the Falcon run with this engine!!!
Good to see you and Marge working together. Don't get to see much of that because she is the camera person.
You forgot the harmonic balancer should be mounted before tightening the cam chain cover so the crank seal is centered.
You may have heard this before, but 1 quart of engine oil swapped for a quart of atf and left until the next scheduled oil change will not hurt the engine and will clean the "gunk" better than you might think. That's not "something my buddy told me", but 37 years experience working on cars and truck fleets.When you get an old engine going, the first oil change should include one quart of ATF. I have torqued some detroit diesel head bolts to 300 ft pounds, but never gone over 125 for a 302 ford, and that was a special build for circle track racing.
I ALWAYS fit the harmonic balancer on the crankshaft before tightening the timing cover bolts to ensure the shaft seal is exactly centered, or you risk a shortened seal life. Then you can remove, or finish torquing the balancer on. I'm enjoying your build.
That is going to be one fast Falcon. Nice job on the build the engine looks great.
Thank you
1:13:12 Murphy seems to enjoy his job of protecting the goats.
He’s the best
Great video! Thank ya'll! I grew up around 5.0s, this is by far my favorite build.
Love this channel and family.We don't miss an episode❤
Good afternoon from Cape Cod ⚓ I learned something very important from you working on that motor, I'm definitely sticking to Chevrolet 😉 actually I learned a long time ago the engines I hate the most of the ones I am currently working on 😂 thanks guys for a very enjoyable video, I'm looking forward to seeing that engine installed and rippin 🔥 keep up the great work guys and may God bless you all ✌️🇺🇲
aww God Bless, Joe Elmore RIP. thanks for sharing that. 302 is my second favorite motor, glad to see the upgrades.
A really enjoyable video. Seeing the engine go together is what it's all about. Gives me good insight for working on my 83 Capri.👍
Another Squeezles merchandise ad!! Way to go, Squeezie!!
YAY! best day of the week! Josh and Marge and Ralphie, Wa and Squeeze! tuned in with my Viennas and my RC!
Thanks
1:03:11 when I had my 351-Cleveland built I immersed my oil pump in a clean bucket with oil and took the pump drive shaft and prime the pump.
Super looking engine!! My first car was a 1962 Falcon station wagon, my Dad gave me.
Awesome thanks
Woohoo! My favorite family. Good luck on the motor work today. 🙏🙏🙏
Thank you!
I'm old enough to remember real family comedies on TV... The Bradys,The Partridges, Happy Days....The Bunkers😂...y'all are definitely in those shows wheelhouse...take care y'all@Sleeperdude
You're welcome
Another great video! A feller needs to take one end of the old shop by the house and turn it into a paint booth. A feller has years of experience in auto body that the kids would be lucky to learn. Great content!
Yeah we might one day
Nice lil engine build and it looks really nice with all the new parts cant wait to hear it
Thanks for another great video!
Awesome video guys, Sleeperdude is my favorite car tube channel! 😊
Glad you enjoy it!
I'm glad that you started a rumble channel, the audience is a little smaller ,but is more free and AMERICAN...👍👍👍
Yeah Ralphie is crushing it on there
just found this channel although i've heard puddin mention it a few times i've never gone looking for it simply because im already subscribed to so many channels but that being said i love Rumble unfortunately everyone is on youtube, im subbing to both just because y'all are on rumble. I really wish more automotive content creators would upload to both !
Kids are growing up so fast. Thank you for clean fun and interesting content . We appreciate the time and effort that you put forth for our entertainment. Remember, my Tim worked on these older cars for many years and still has tools for those jobs. Just let us know anytime.
Good job. Very detailed.
SLEEPERDUDE SATURDAY
Thanks
That’s good info on that summit cam. I’m a big fan of the F303, but in the last few years they cost as much as I’ve spent for custom grind solid rollers. Definitely gonna check out the Summit one!
I spent many years at Cummins building 10, 11, 12 and 15 liter engines putting heads on them. Torque was between 430 and 480 Ft pounds for the bolts depending on which engine size.
Love the upgrades. Great teamwork assembling the motor. Now, please, finish something. Its killing my ocd! Love you guys!
This is going to be a good Saturday with sleeper dude family that was awesome of you to honor Joe he was a legend .!!! that falcon is gonna be a beast with that motor have a good weekend guys. god bless with lots of love from Pittsburgh pa
Thank you we are excited about it.
Have a great weekend sleeper fam. Thanks for the video
Thank you too
looks great. caint wait to hear it
80 ft pounds is not much for head bolts considering most wheel lugs are 100
Yeah 👍
Wawa's face when you mentioned the engine in the living room. 😂😂😂😅😅😅😅😅😊😊😊
🤣🤣👍🤣🤣
After a hard days work, its nice to come home and rest with a sleeperdude build
Thankyou Mates Every Program is a learning Class . I Dig Every Class
Thank you
wooohooooo 👏another new exciting sleeperdude-saturday-episode !
Hopefully wrenching on a big block.(looking at the thumbnaill)
Let the sleeperdude-saturday-party begin !
As always God bless you guys and God bless America !
Greetings from Holland
😀🇺🇲🔧🚘❤️🙏🏻
Hope you enjoy!
It's always a good day with a new sleeperdude video
Thank you
@@Sleeperdude you're welcome
Ton's of great info , Thanks
Great looking motor !! Thanks for another , Brother !
Just trying to help. MLS gaskets need extremely clean machined surfaces to seal. not a good idea on an old unmachined block, that's what composite head gaskets are for. Don't jack on machined surfaces with crowbars, screwdrivers etc., you'll wreck the mating surfaces and cause leaks. Don't use stainless fasteners on engines! They're not strong enough and they cold weld and strip threads unless you use anti seize. Use steal reinforced silicone gaskets on the ends of the inlet manifold not huge beads of RTV. I have never had an intake leak doing this. Don't use RTV or any form of coating on gaskets. They come impregnated with boding agents so they glue themselves after a few heat cycles. you ruin that if you coat them with anything. I've been building engines for forty years including aircraft engines and my engines don't leak or fail, ever.
at 31:51 Josh must have forgot the back side of the caliper is for measuring the inside bore🤣
🤣🤣
cant wait to hear it running
Another great build to learn.
funny way to say that Ralphie is making flat pieces of steel that have a angle on one side and taper to a very acute angle at the top🤣
must say that is an amazing hobby and can make him big money
I found I could harden an edge by just welding, and quenching. Was always surprised how well it would hold an edge.
Also used tig rod meant for welding cast steel. Shame the utubes are such panty waste sissy's obsessed with "safety".
👍🤣🤣
Lots of information for people who build engines. Love it when the children do goofy things! Thanks for sharing 👍 😊
Thanks for watching!
New subscriber, very cool to see a family work so well together!
Thank you!
All right man you’ve been in a funk for a little while now building these engines and have them blow up Anya. Let’s hope that this one is the first and one in Dunn one and done. I know you guys got this you got the best team in the world right there with you
Was waiting for this vid today bangers 🎉
Hope you enjoyed it!
Greetings from Germany! Love the show.
where in Germany?
i watch from Minneapolis Minnesota
@@danhard8440 a small town called Unna.
@@20thCenturyMan nice i google images of there really pretty buildings and churches
the origins of my family was a town called Dansk Poland but you know being American i have pretty much everything now genetically🤣
@danhard8440 that's the whole world now lol
Awesome! Thank you!
You always give the most info on fit and fitment on things like this keep it up man great content
Nice lookin engine.... can't wait to hear her run n chop.... God bless y'all!
Thank you
I have been waiting on this one. Just awesome and keep up the good work 👍 😎 God bless you all and semper Fi
Thanks, you too!
@@Sleeperdude ur welcome
Great knowledge there buddy
Will watch on Monday 😀
OMG at 1:10:10 Marj and Squeezee had me crackin up🤣
Nothing but trouble them two
Lmao was Squeeze about to barf choking down them Viennese?? Great Vid Josh thanks to all of y’all!!
Great video guys👍thank you🙏💯
i've been watching your channel for a few years and I love seeing a good family build cars together. I wish I had this kind of family growing up. I'm the only one in my family who is a gearhead. Its cool to see the kids grow up and see their personalities shine. squeezy is really cool I used to love painting when I was a kid and she has a real talent! keep up the good work!
If you get bite by a goat do you get super super goat powers like spiderman?😂😂😂
Absolutely
WOOHOO LETS GO !!!
Yes!!
Great video and Woowee what a pretty engine!!! Love Falcons!
Glad you enjoyed it