We Bought the Cheapest 10HP Diesel on Temu and Put it On a Go Kart (it Rips!!)
Vložit
- čas přidán 9. 07. 2024
- Go to partners.connecteam.com/carsa... to make the most of your business today! Brought to you by Connecteam.
Go Power Sports parts used in today's video:
Bolt together go kart: bit.ly/3W15tZm
1" bore clutch: bit.ly/3XX7CI3
New Go or Blow merch!
Tee: cars-cameras.com/products/go-...
Sticker: cars-cameras.com/products/go-...
Tank top: cars-cameras.com/products/go-...
Use code "carsandcameras" at checkout at langmuirsystems.com for $100 off your crossfire pro plasma table!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video. - Auta a dopravní prostředky
Go to partners.connecteam.com/carsandcameras to make the most of your business today! Brought to you by Connecteam.
Now to get a cheap temu turbo for ir
It needs bigger rear tires. Diesel has the torque needed to rotate a larger wheel.
@@dbomber69 Agreed, they could get more speed out of that thing for sure
Sorry if I missed some episodes but what happened to Charles??
@@jasonkaelin2337he’s still there every once in a while but not every episode anymore right now, think he had to move back closer to his parents for a new job an it’s too far to drive back an make episodes every week , haven’t seen him in bout a month or so though as of right now but he left the every week show about 6 months ago
The reason it finally ran is because you cracked the line open, its extremely hard for single cylinder diesel engines to bleed themselves.
agreed, and maybe the fuel that was in it was a type of "shipping" super low quality just used to lubricate for shipping purposes, draining the fuel, changing fuel, and popping that line got all the good fuel in and bled the system.
@@dozer8065exactly i feel like it was oil to keep it from rusting during storage/shipping
@@StroDshiesty1 theres nothing to rust, especially the injection pump parts its all extremely high grade stainless, almost indestructible, its just lube for the tight tolerance stuff, keep in mind the plungers inside that pump have tolerances that are less than a thousanths of a inch
But I assume they mostly bleed like old mechanical injected truck diesels (pickup trucks) like when someone runs their 12 valve out of fuel just there's only one cylinder so there's no hope of one of six getting some fuel and making the engine spin over on its own
@@dozer8065to be fair, diesel fuel is probably the lowest quality stuff you really can get for an engine designed to run on peanut oil
Lol it needs a little tractor exhaust flapper
THIS
PLEASEEE 🤣🤣
like the first one!
Incredibly important. I wish I had a diesel dirt bike with the exhaust flapper thingy
or make a mock big rig exhaust
The moment you put a turbo to this gokart its gonna be everyones east european dream gokart, just imagine "The TDI Gokart" lmao. 😂🙌
It's going to happen. Parts are on the way
😂
prawda!
When it comes to diesel engines, it ain't the horses, it's the torque that sends it, even with that swiss cheese flywheel... :P
yes there's no horses in a diesel engine it contains pistons
@@grannysgushinggash i dont think you could even fit an entire horse in an engine.
@@jacobkennedy6820 Then you don't have a big enough engine. Or a small enough horse I guess
Torque In motion is horsepower. What your feeling is horsepower being made sooner.
@@jacobkennedy6820 you can if you mince it first
Love how my starter box can start a 420cc diesel but struggles with a small block Tillotson methanol engine 😂
Its fighting the spark advance, not the compression 🤔😉... Tilly Meth builds are Bad A55 🎉🎉
@@z1berzerker Electronic ignition would be a great upgrades for a lot of minibikes
Whats the difference ? Arent they already electric ignition?@@RobertJeffersonBased
@@justinarseneau4450 the difference is that spark timing on a small engine with a magneto is fixed, with no advance or retard possible while the engine is running. a battery powered coil ignition system can have adjustable advance, just like car engines have.
@@marzsit9833 oh ok thanks for the info
“This thing is junk…..HEY WE HAVEN’T EVEN HEARD IT START YET…….Exactly” 😂😂❤ love you guys
Ive had 4 of those. Remove some of the shims between the little injection pump and the block. It'll give it a few more hp and more smoke.
For zero benefit.
@@Failure_Is_An_Option Are you literate?
@@Failure_Is_An_Optiondiesels work different than gas engines. More fuel=more power😂
@@proxyhx2075it'll blow up if you mess with the timing too much, and definitely will shorten it's life running it advanced more than stock
Are you stupid?!@@Failure_Is_An_Option
Also, dont piss all your money away on brake clean. Buy a gallon of acetone for 20$. Get a squirt bottle and blast it off with compressed air. 8-11 cans of brake clean in a gallon.
And it's the same stuff lol
Thanks for the information!
Diagnosing a brand new engine like they found it in a junk yard is hilarious
True but that's temu. Could be wish😢
Is wish still a thing?
They are the same thing @@bradkenyon1643
Sign of Chinese cha bu duo construction. Sadly very typical.
One man’s communist utopia is another man’s junkyard I guess 😂
This build needs a custom homemade transmotion like a 3 speed trans "crawlin, crusin, racin". Yall could do it for sure 😂🤟
Yeah imagine an even gear spread for 90 mph!
@@zAvAvAz With a turbo, more fuel and proper gearing for it, maybe it could get there. More importantly, would you want to ride that cart at 90mph? Answering "yes" could win you the "Biggest Balls Of 2024" award.
@@sabero5668more likely a Darwin award lmao
Bruh that got me so good I was like holy moly she booking it then at the bottom of the screen
“She made me play the footage back at 2x speed to make it look fast”.
Yall are so cute it warms my heart
Diesels are all about the torque. The weight holds you into the curve, and the torque pulls you out. I concur; probably not a great track machine, but perfect for that Grand Prix woods course!
Now, For Some Free Mods!!! - advance injector timing a few degrees by removing 1 or 2 shims under the unit pump , turn fuel up also easy since its just an adjustment no parts swap, an ditch that stock air filter for somthing bigger and more free flowing that I'm sure you have layin around the shop, Then Bam MOARRRR POWAHH!!! And yes Turbo would be a good addition , makes it easier since that engine has a pressurized oiling system too
Turning up fuel without adding air is a bad plan... EGTs up for minimal power increase. Advancing the timing would be a good plan though.. He already has smoke so more fuel is not going to do much
@@DarkAttack14 High EGTs on a NA diesel aren’t a problem. The old trucks with 200 hp had flames coming out the stacks and manifolds glowing
@@DarkAttack14 Being able to easily turn up the fuel like that is going to be the difference between the turbo simply cleaning the exhaust up and the turbo actually making the engine more powerful. If they want any gains from the turbo they need to be able to turn the fuel up.
As long as they don't mess with the governed speed setting it should wake up pretty good with some boost.
@@DarkAttack14 On an NA diesel its tested to get more Power at Rich Mixture(even under Lambda 1/aka really smokey), since you are air limited, EGTs also arent a Problem und NA conditions. Adding air through a turbo would be the best addition for the extra fuel tho
Timing advance may be of a very slight advantage. Increased fuel... pissin in the wind. Air filter... pissin in the wind.
Your girl did awesome! Re watch the video and watch how she relaxed her brake foot. She had it flat out on the gas pedal. Glad to see you two enjoy go karts. Next she has to help build her own.
Got same diesel engine from ali on my boat running now 5th year. Always starting… got electric starter. So engine, gear/prop/outboard unit, electric starter for 500euro shipped
No one talking about how the Diesel engine sounds like a lions roar when he lets off the gas at 1:10:48 Love the sound lol
Yall need to have a hot lap day where you re-run all the board leaders!! That would be an awesome episode!!! Cheers guys and love the vids!!!
She dont need to be shy, we are here to support and enjoy go carts, mini bikes etc. Its issac we're here to judge and talk about... Them sideburnz... Lol
Love em. 😄
And let not get started on his poocha shell necklace,
Can’t believe you got the original Goose from top gun to help out
If I was building a diesel kart I would definitely go with a torque converter.
Keeping the rpms in the peak power curve. I'd probably gear on the high side so when the converter went to full lock up my final drive would be set for top end.
I'd want the engine to top out at the end of the longest straight away.
John going to his roots with the music during the painting montage.
These long form videos are impeccable 👌 I love having you dude on in my workshop. Great job on the diesel boys!
This was such an enjoyable episode to watch. It had everything in it. Some build, some fix, some vlog, redheads, and you had fun most of the time 😅
I almost feel like I'm watching an episode of Diesel Creek....lol
Matt would be stoked to see this lmao
Now this is a sweet platform!
Was just looking at some diesel engines! Excited!
Absolutely!!
It reminds me of the small diesel powered go kart you guys built a while ago with the engine from EBay !! Loved that video
@@mathieulachance151lol they said that in the video
Now it’s time to super or turbo charge it
I have this same engine I cobbled on to an ariens 28 inch snow blower frame. The power output is super good. I've put it in to foot deep wet heavy slush and it loved it. It was barely even taking a load and it was LAUNCHING that stuff.
Temu.. Giving the Chinese continuous American comedy since 2022
So happy to see home much you guys have grown the channel over the years!! Keep up the great work!
Love the long form videos! We asked, you delivered thanks from all of us detail orientated fans
I have a hard time finding enough time to sit down and watch an entire movie though. Personally I liked the 30 ish minute range, longer than 15-20, but not nearing feature film length
I was cracking up at around 1:12:30. John looked like he was on another planet or something 🤣
The mix of colors reminds me of the Partridge Family bus from the 70s. Need a flipper on the exhaust pipe. John it was nice of you to introduce your girlfriend. You two make a great couple.
Lol. I have that same motor on a mini bike. With 40 converter. I call it the D-69 cat lol. It's all done up to look like a cat machine.
i need to see this
We wanna see this sounds like a cool build man
Ah, you fell for the ol' flywheel scam. Happens to the best of us.
I've heard some of these engines have sat in a dirt turner for over 6 years, with little to non maintenance at all, still starts and runs like a champ
Y’all should get a flywheel from an L100 Yanmar because they are the same exact engine.
Ya'll need a set of holes on that bench to bolt down engines. Tapped so no reaching your hand under the table.
A “universal” plate to mount on would be a cool upgrade to the shop. I LOVE upgrade videos
one would be a start 😆
I was thinkin a c clamp kinda thing with X pattern for the 4 bolts, and the clamp fastns down on the ''table'' or into a vise even but ''designed'' to set into the jig table thingie and watnot ;)
Good idea 🤙
Pin this please!
Blue locktite comes in a tube/glue stick/paste. If you have any little ones, glove them up and have them apply it to all the bolts in the kit. If you don't have little ones, the paste still makes it easy and less messy.
I haven't built one of these carts but harbor freight trailers are built with nuts and bolts, that's exactly what I did with my son, we poured outs all the hardware, put blue locktite on it and sorted them, it was a great first step in the project and it's a good first "wrenching" project with my son.
Tig is a lot like gas welding. I love Tig.
great video! thank man!
had Conencteam in my last job and it was SO EASY to track out shifts. loved it.
diesel has a forever shelf life
They've mandated summer fuel where I am to be B5 biodiesel now. It's more prone to bacterial growth imo. My old job had a truck sit for about a year and the fuel went bad. Another truck sat for 3 years and it didn't because it was before they put that crap in the fuel.
@@juliogonzo2718 you can drain it and run it through a hard filter and remove just about anything
@@juliogonzo2718biodiesel is sh**
the small hex plug on the bottom right of the side cover is an oil feed. the exhaust flange is close enough to a predator 420 that an off the shelf flange fits. i turboed mine with a vz21.
Where'd you buy the motor from?
tell ya what, this was in my feed, and it was right up my alley. great content, great shop, great personalities. makes me wish i had friends lol! well ones that were into this kinda fun. see ya on future videos ill be watching.
IMO its the extra torque from the bigger displacement helping on the long uphill. The 98 almost died going up there.
yeah, good to get a tig! you guys need one, and when you are good at it you can take the tig home and do welding at the tv room table. So much less dramatic with splatter and stuff then a mig!
You guys will love the arccaptain welder. I've been running mine since the beginning of the year on aluminum, SS, steel, and bronze filler and it is a very capable machine! Hint, you guys really need to get the foot pedal, the control it gives you makes the difference between mediocre and great looking welds especially on thin material!
Epic paint-job on that bolt-cart! 👍👍👍
Turbo that biscuit !
I love it !!!
I was a TIG welder for 3 years... it is so much better than MIG... it just takes some reps to learn how much heat to use and building muscle memory with adding the rod... and you can weld any material with TIG. I was primarily an aluminum welder and TIG is the way to go... anyway enjoy... in a few months you will have the hang of it.
Rolling coal patrol!! 🔥 💨
Thanks guys for doing this experiment, I’ve been wanting to do something like this with a couple buddies, but from what I’ve gathered they’re better as a boat anchor than an actual useable engine
Diesel gate is a really good name for it 😂
Loads of torque I bet
Once you git the hang of it, TIG Welding is awesome, I actually prefer TIG over MIG for certain jobs where the join will be visible.
I love yard carts! Nice effort fellas!!🎉
This is brilliant episode. Not so rushed. Arsome stuff.
Id say going 1-2 teeth bigger on the clutch would improve the top speed by a lot. 1 tooth on the clutch makes up for 8 teeth on the rear. A Turbo and a good porting job would improve the hp and torque by alot.
how many teeth on that clutch sprocket, did you manage to see by chance?
@@aidanlyons1155 Just taking a guess id say 14-15 if its a 1 inch shaft engine.
I mean, they did say it's already sketchy enough in the corners, adding speed probably isn't going to help much, at least not on their track.
@@aidanlyons1155 bobby dont miss anything
i would love to see you put a turbo or even a supercharger on this machine
That was fantastic loved it great video
I HAVE BEEN WAITING FOR SOMEONE TO DO A VIDEO LIKE THIS
Worst tig weld is the one you didnt try. I was blessed to have my entire apprenticeship in tig doing stainless food and beverage equipment 29 years ago.
MIG = Monkey Ignorant Gun. Any monkey can do it, and some do it well, but tig is an art.
amen ma man
Over here in UK us stick welders call migs hot glue guns! I've done thin sheet and even motorcycle headers with stick,done heavy work too (RSJ'S)and cast iron! most of that is an art as well!
I apsolutly died of laughter when I saw the comment about doubling her playback speed
Gotta love this idea brought back to the chopping block after a couple of years, it was one of my favourites from y'all.
Just wanna mention this video was so good i didnt notice it was longer than an hour. Been watching since 6 pm and now its 12 (was doing stuff in-between but never changed videos)
Uh, did they know about depressure knob?(the little red knob thingy, top of the cylinder head, beside the injector. No wonder the starter are just shredded to pieces 😂😂😂
yes, they knew about it
@@lensrc7460 I think they should use the knob to disable the compression, thus make it easier to gain more rotation momentum. After enough momentum gained, just let go of the knob and the engine will do the rest.
That's how we start some Chinese diesel engine here.
Those Chinese really go low with that starter tho.
@@nihildegrasse1700 They were. Watch again. They even talked about it.
@@nihildegrasse1700they did the starter was just that shitty that it still broke
Before things get crazy with mods, I'd love to see a little torch shooting propane into the intake via "nitrous" button.
You're speaking my language brother
That would actually help.
@@lamarzimmermanmennonitefar5269It's not goimg to hurt anything of value.
nobody uses propane for a reason, nitrous is better.
@@cs-gj3yfwrong. Nitrous is extra air, propane is fuel. A diesel makes power with timed fuel injection and the correct amount of air. If it's making black smoke then you need more are, if it's not you need more fuel. Adding nitrous to a diesel making no black smoke is going to get you little/nothing. Adding propane is untimed fuel for when you can't get any more from the injection pump. It helps spool the turbo earlier too. I have a propane Injection system I built on my diesel Mercedes I tow with.
Fun stuff guys. Congrats to BBR for the design.
This is a great video guys thanks for your time
Your buddy needs to be part of the channel. He's already super comfortable with the camera 🙂
He has his own channel thats why hes so comfortable lol
@@bicbuilds 🤣👍. I did not know that. I'll have to go check him out. What's his channel name?
@@g0ldensample21JumperCableDadz
Lol looks like the Will Smith's jacket in the Prince of Bel-Air
Or the Partridge Family bus.
Isaac is the man he makes this channel
I remember watchin' yall back when you started your channel glad to see you're doing well!
Ya know, your other diesel from YEARS ago came with a broken flywheel as well! Had a single fin broken off!
Wheres Charles? Ima ask this on every video until I get a answer.lol
Search “ Did Charles from Cars and cameras leave”. I believe there is a video of a podcast with announcement?
I'm doing the same thing.
I feel like there was a fall out.
@@scubasteve3293 it seems that it’s time for change. Hoonigan iis now crap after it imploded due to corporate nonsense, Donut media has everyone jumping ship, Grindhard Plumbing lost a guy and now this. Change happens, sometimes it’s for the best, but not always
There is i just found it, I'm glad he left on a good note, I'm going to miss that guy.
Yep I found it.. didn't know they have a podcast
You guys have so many shifter Karts and go karts I would love to be in the same place as you guys in a few years from now. Also this video gives me old cars and cameras vibes I love it ♥. Keep it up
I love TIG welding... can be so satisfying once the learning curve realy hits
Quit lying you didn’t pay $3500 for that motor you using
They said $415. What are you on about?
Yep 0:50 $415 so no idea where you got $3500 from
@@shaynegadsden they are a chinese clone of a yanmar. the Yanmars are $3500
@@JoshKilen even if true i'll assume you are what does that have to do with anything. They know nothing about the motor explained how they picked it and what the price was so still $3500 wasn't mentioned and sounds like OP didn't pay attention and just made up their own backstory
Please do much more content with this setup. It is so awesome. ❤
It turned out great guys 👍👍
Ive never watched an hr long youtube video beforee this was quite entertaining,learned alot too .
What a neat episode! I'm so glad I clicked on it. I really dig that paint idea
just to recap; diesel generator, mounted on a 'put-it-together' go-kart is awsome! and that's cutting it short still haha that thing is a monster!
Guy's the Diesel go-cart is an Awesome build & i Look forward to you guys adding a Turbo to the build !!! I Really think it would be an Amazing project because it would open up possibilities for folks like myself as I have several diesel small engines that I have acquired from auctions & trades over the past few years !! I build go cart's, buggy's, Side by sides etc..... & have been looking for a Tried/Tested & True setup for a Turbo Diesel small engine combo that's solid & not a "Break the Bank" investment !!!!! I Simply LOVE your Videos & how you guy's are able to include all of the content that makes my builds so much Easier as well as much more inexpensive !! PLEASE keep the builds coming as I watch Every Video you guys post atleast a half dozen times per video as a reference or to introduce friends & Family to your informative & just Downright Wholesome HILLARIOUS "Spot On" Builds !!!! Love you Guy's!!
Another great vid guys...Guess the torque of a diesel and weight over the drive wheels = Traction could be a factor...just plain ol brute force....love it
Awesome video guys 👍
This is the stuff I love. You guys, a little kart, and a handful of bad ideas.
Love these long vids
I think it should be named the “Rainbolt cart”!
That was sweet guys keep up the good work. ✌️❤️🍺
Yeah this 100% turned out better than I thought it would based on the description and explanation lol. I love the exhaust
BBR really went over the top with that kit! Impressive!! You guys are awesome for building their kit on your channel
Hell yeah, good job on that weld Jon!!🤘🏼
With all those different colors it looks like a partridge family go cart.
I didn't know Will Ferrell built go-carts! Go Ricky Bobby! "If you're not first you're last"!
What a great idea guys love it
Love the color scheme on the Bolt Go-Kart.
Pretty cool man !
👍🏼👍🏼
I might buy one of the kits just to see what it looks like sanded and polished to a mirror shine. That’s all I could think about while looking at those parts 😂
Yall need a video restoring all the old builds
I bought this same engine for my snow blower and it works really good. I dealt with some small issues finding the right belt size but once I got that dialed in it’s strong as a bull!