VOLKSWAGEN SUSPENSION | TRACK ROD AND TIE ROD ENDS | CHANGE | HOW TO
Vložit
- čas přidán 15. 07. 2020
- HOW TO CHANGE STEERING ENDS OR OUTER TIE ROD ENDS ON A CAR
HOW TO CHANGE TRACK RODS OR STEERING RODS OR SHAFT OR TIE RODS ON A CAR
TIE ROD OR TRACK ROD OR STEERING BALL JOINT ROD
THESE ARE SOME NAMES FOR SAME PART
track rods and tie rod ends (steering ends) are some major components of a steering system , after a while when ball joints inside track rod and tie rod end become loose due to wear and tear , they tend to make noise and start generating vibrations in steering wheel , which can be easily felt .
In this video we will look hoe to change the track rods and steering tie rod ends, fairly simple just need common hand tools .
performed on volkswagen polo
process is similar for every vehicle out on road
identical for various models of volkswagen , skoda and audi like rapid , fabia, octavia, superb,polo, vento , ameo , jetta , passat , audi a3 and a4 , Q3 ,Q5 - Auta a dopravní prostředky
subtitles / closed captions available
Your Videos are very helpful sir ,keep making these type of video's👏👍👌
Very Informative Video Sir.
Really appreciated...
Great video
Good big brother
Kam karte karte video khud he banana.... bohot mehnat hai 🙏🙏baki video mast banaya hai♥️
Nice sirji
4:23 is this amount of vertical movement of the track rod is found to be an issue?? Should we have to replace the track rod for this?? Because today my technician told that i should replace the track rod because of the vertical movement of the track rod almost the same amount of movement as shown in this video.
👌👌👌
Nice
So informative 👍 I am planning to go with rear TRW shock absorber as I feel stock is too softer side and front with monero. Please suggest for my Vento tsi 1.2 😊
Sir Monroe are also soft ,
But I guess , front Monroe + rear trw will be great
👌👌👌👌👌👌👌
Brother.. im your big fan , and your video is very help full for me.. (safari dicor related)
I have safari dicor .. and i love it..
brother, but now a days , one problem create there, when i start car ,and take 1st gear.. then car hatchak le kar aage chalti hai ..
sir , kuch help kare
Nice video. Just a small question, is the TRW Tie Rod end slightly less bent than the one on the car or is it just because of camera angle 😅
Sir camera angle 😅
Hello Sir, My Polo has rattling sound while taking bumper, if its a suspension problem, then, what is your suggestion on Brands Monre or TRW or OEM for full occupation of the vehicle on ride?
Sir OEM components usually performes the best . So i would recommend you to go with OEM
Waiting for new videos
Great video!!
My 4yr old TDI has small rattling sound from lower side of front wheels. sound comes at low speeds on broken roads. What can be the probable cause of this?
Had you checked the axle for torn rubber boot ?
Probably link rod.
Hi.. Nice video!!
So what's your feedback on TRW's.
Nice and tight , good feedback , but not that precisely made
@@yourDIYneeds Thanx for writing back.. actually it's time for me to change those in my car. Would you be able to suggest which is a good brand or should I stick to OEM.
Thanks bro.. very informative and helpful for DIY people... whats the cost for above spares??
Sir track rods and end are close to 5k total
Such an informative video! Thanks a lot. My car has been making a creaking noise while turning to one side (specifically to left) when the car is moving. Could it also be inner/outer tie rod related?
Sir does the noise comes even when turning on a standstill ?
@@yourDIYneeds No it doesn’t. The noise comes only when the car is being driven, especially when the car is turned left, and the weight of the body is towards the right side of the car. I hear the noise from right side front wheel.
And sir when the noise comes , is that noise also felt in feet ? While driving , means like a vibration
@@yourDIYneeds No. Only the sound occurs. No vibration of any sort and steering feels normal without any issues. Only the sound occurs like some sort of lubrication issue.
Sir it needs a good visual inspection
Nice video.but can we fit same parts of other brands if we don't get the genuine volkswagon part
Yes , parts available for multiple car models
My Volkswagen Vento link rod, mount, and steering rack to changed...in showroom they told it cost 25000 ...is it worth.or should I change from outside worlshop
Rack doesn't need to be changes if the gears are in good shape , just need lubrication and pinion adjustment , link rods can be purchased aftermarket , mount is best qhen used OEM
Bro, Vento TDI MT 2012 servicing k baad cabin vibration bohot hai , gear knob and steering pe bhi feel hota hai intense vibration especially AC on karne pe. VW waale radiator fan replacement, and local garage wale engine mount replacement bol rahe hai.
What should I do?
Sir 2012 hai to ideally mount to 5 saal baad hi change ho jane chaiye the ?
And radiator fan kyu ? Radiator fan is not even connector to the body directly .uski vibration steering tak ane ka chance hi nahi hai
Get the engine mount changed and aligned properly. It will do the job
Appreciable 🙌, Thankyou brother ♥️ more power to you ,your videos are very helpful . And one more thing , engine mount change karu ya transmission Mount ? Ya saare ? Cuz while shifting gears jhatka sa mehsus hota hai . #keepGrowing
Sir sare mounts ek sath hi change karne chaiye , jada better results milte hai
Which suspension is best for vw oem or monroe???
Sir best is to go with OEM , if you like the way it drives .
Hi,
In My vw polo 1.5 tdi , I m unable to put it in second gear, from first I have to put in third gear.
Pls help and guide to resolve issues
Check your shifting mechanism , which is located under the air filter box and grease the gear lever ball for which you have to open the gear leather gator
Similar issue I have faced, took it to service centre, there first they told me maybe gear selector mechanism cable might be damaged or cut, after sometime they somehow adjusted it,
Bro i have a polo 1.2 petrol the problem is that tiorod axle the one which you replacing in your video it has got stuck/jam when i went for an alignment i came to know that it is not all moving either forward or backwards what to do bro plz help me to sort out the problem and why it will get stuck/jam bro what's the reason ??
Maybe got rust welded , it happens with parts but it depends upon the climate .
Just get it heated by a blow torch and it will open easily
I went to a showroom and told about problem they told me that changing of only tiorod will not solve your problem we can assure you only 50% of better chances for 100% solution you should change full steering rack system it would cost you around 17,500rs so i came back for better suggestions and finally saw your video bro #"thanks a lot bro for your suggestions" but should i change the tiorod or is it ok to give heat treatment for the present tiorod and main thing can i do this in home bro or plz kindly make a video on it bro if is possible it will help someone in feature.
Sir to give it heat you need a gas torch .
You may not have that at your home , take it to a local garage and tell them to losse it by heat
@@yourDIYneeds thank you
Bro, can we use two different tie rod of same lenght ?
Will it effect my car ?
Sir yes you can , but it may happen , you will feel that front suspension is acting different
Please make a video on camber I changed bushings tires still passenger side wheel have negative camber
Adjust the control arm , next video will be on that topic
yourDIYneeds Thanks I like your videos I’m also freak of DIY
Bro my polo steering feels stuck while turning as its rubbing something (ie feeling some resistance) and making tak tak sound..what will be the problem..your suggestion please.thank you in advance.
The steering rack gears has become dry and grinding , need to drop the subframe out and remove the rack and then disassemble it and lubricate it ,
If you go to ASC , they will force you to change it for a new one .
@@yourDIYneeds Thank you bro😁😁
I have driven my Vw polo Gt tdi 35k km
Should I change my suspension
No sir not yet
Hello brother. A friend of mine is going for a used polo 2014 manufactured and 2015 registered. If you could throw some light as to what all to check during inspection? Or should we communicate over email ?
Sir is it diesel or petrol
If diesel , then a 1.2 or 1.5 or 1.6
1.5 and 1.6 engines have a nice reputation but 1.2 doesn't , as its a 3 cyclinder engine , and by nature 3 cyclinder engines are a little more prone to vibrations and a different engine note.
Things to check
1 . Blowby
2. Check the suspension for noise
3 check all the electrical system like windows , power steering for working and drive it till upper rev range and keep an eye over the instrument cluster for any light poping.
Hope it helps
You can mail me at everydaydiyhelp@gmail.com
@@yourDIYneeds yes. Sure. It's a 4 cylinder 1.5 TDI Mill.
Blow by as in from the engine oil cap ? I have heard VW engines do emit some smoke from the engine oil cap ?
Yes sir check it either from oil filler cap or dip stick , vw usually have a little more blowby than others , but nothing to worry because its because of the engine design , not due to any problem .
@@yourDIYneeds hello. I have sent you an email. Would be grateful if you could provide some insight.
Sir i just replied , please check
Use wd40 everywhere, that will make your job easier. Using proper tools properly will help you to complete this job very easily.
Please guide me, Safari dicor, Temp Guage cool aur normal ke beech flaqtuate hota rahta hai, radiator cap new lagya hai, Running main koi problem nahi hai
Thermostat valve nikaal rakha hai sir ?
Kyuki ye to jab hi hota hai
@@yourDIYneeds Coolant temperature sensor ka bhi problem ho sakta hai kya.....?
Sir firstly thermostat valve ki problem ki wo operating temp se pehle coolant flow kyu provide karwa raha hai radiator ko.
Secondly ki thermostat switch or temperature sensor kharab hai and fan ko jaldi on kar raha hai or relay atak gai hai fan ki
Part number for the spares please? And are TRW tie rods as good as the oem ones in terms of lifespan?
Sir life is more of kind the same they are still working without any issues, but keep in mind they are a little stiff , i am sorry that i won't be able to provide the part no. As i got them without the box in a plastic pack
@@yourDIYneeds thank you very much. I am asking about the OEM spare part number not trw
6RF423810
@@yourDIYneeds thanks
what about Sachs are they stiff too?
Sachs seems to on the balanced side , neither stiff nor soft
@@yourDIYneeds thanks
@@yourDIYneeds can you help me with which shock absorbers will be best for high speed handling and stability and their part numbers?
Sure sir
For stiffer and stabile ride you can go for TRW
Here is the part no. JGM9005S
But sir be sure that you need stiff ride
And a set if tyres with stiffer tyre sidewall will also prove to be the best mod you can do
Like yokohama s-drive or continental UC-6
Bro, track rods TRW k hain ya MONROE?
Sir jaha tak yaad hai TRW hi the 😅
What is the life span of inner tie rod ends ? Also how can one identity the time to change it ?
Sir life depends upon the condition of the roads we drive on , when they go bad , you can feel a bit of free play in steering
@@yourDIYneeds hmm i see ! Mostly driven on mumbai roads so u can understand... was checking the linkages and found i can move it left n right even when cars was on ground. Also i get weird rattling/clutter sound when going over rough patches... I doubt the bad linkages and ball joints as shocker mounts,rack, and lower arms are already replaced 8k kms ago
PS: car is moved out of Mumbai and has fairly better roads
@vrushabhfasge2346 , sir then change the linkage and sway bar links as well
While I turn the steering wheel of my car, its making sound. In the standstill position. Also at low speed. high speed it is very less sound. Because no need to rotate steering wheel. Please reply. Am a new subscriber
Sir is it comes from the bottom of the windshield area ?
@@yourDIYneeds yes I can feel that noise is coming somewhere under the bonnet area left or right. Yes it's from the front area
Shock mount bearing
Strut bearings.
@@yourDIYneeds Hai, what are the methods to diagnose a bad drive shaft?? Or bad drive shaft symptoms? How can we identify that? When I removed the wheel for replacing ball joints, track rod ends. I saw that minor oil leakage through the drive shaft (boot). Both left and right sides. Also there is a minimal play for the drive shaft! We all know that, a good ball joints doesn't have that much play, like that same method? Is it okay to identify like that method???? Please tell me what will happen , if we don't change at the right time?? Will we get stranded on the road?? Will the car get stuck?? Please reply.
Sir Mera polo 1.5tdi hai, chalate vakt door automatically unlock and lock hojata hai, tak tak locking ka sound aata hai ,pls solution batayi ye
Sir door locking module malfunction kar raha hai , change hi hoga
@@yourDIYneeds ok sir thank you , aur ek sawal tha sir, mera polo 4yr hua hai, 42k running hai, kal second gear nahi lag rahata tha, stuck ho rahi ti, showroom me gaya ,unone kaha ki gear cable cut hogayi hogi, ab unone adjust karke diya ha abi to problem solve hua hai par sirf 4saal mai gear ki problem aaya hai, or us part ki kimat 5k hai, kis wajaha se a problem hogayihogi, VW OEM parts bahut mahangi hai,
Sir 2nd gear sabse jada abuse leta hai from driver due to our country's right side driving , so it just need a bit of lubrication on the gear lever ball , under the shifter and a bit of adjustment on the cables
@@yourDIYneeds sir ho sake tho pls ek dedicated video banadijiye is topic mai, kis location mai lub karna hai dikayiye, VW vehicles repair baare mai bahut kam videos hai, aur showroom waale tho direct part replacment karne keliye bolte hai, once again thanking you sir 👍👌👌👏👏
sir part kitho miln ge vento de
Sir daso kee chahida hai tuhanu ?
Sir what's the price of the end rod?
Sir it was close to 1900 at that time
@@yourDIYneeds ohh ok sir, thank you
Tata safari dicor blower speed cooling was good but fan speed is slow plz tell what was problem and solution to resolve this problem
Plz bro
Reply
Sir looks like the coil is blocked from dust , need to clean it
Sorry for late reply
How to clean coil at home
menu daso ge vento de part kitho miln ge
Sir mera ek known supplier hai , mera saar samaan ude kolo hi aanda hai
@@yourDIYneeds kha per ha sir contact no send karo or address
Sir contact no. to nahi hai , but unki shop kashmiri gate market me hai hamilton road pe
Je inner rod kyo change kiyaa ?
Kyuki sir , poora suspension ho chuka tha , bus wo hi reh gye the , and thode se loose bhi the
yourDIYneeds bro u have video how to change sway bar bush bcz i want to change vw servicer center labour charge 800 its to much so am going to change my self
Bro actually had a Problem in my Vw Polo 1.6 2011 model
Facing issue from 1 week
Bruh while driving
If i turn steering +2 +1 0 -1-2
It will stick at the same
While uturn steering come back to 0
But power steering is smooth as before
Plz help me out dear
It’s making me so dangerous to drive in city traffic and highway
Sir 1st thing is to go to a alignment shop and tell them to check the castor of the vehicle
And they will tell you ( this car's castor is fixed and doesn't move ) but when bushes of lower control arm and lower ball joints gets wear down and loose they affects the castor in negative way , even one degree of negative castor can affects how your vehicle drives ,
But I have one request , find a alignment shop which have some professionals and have a clear understanding of camber castor and toe , because most of them just understand the toe 😅😅
@@yourDIYneeds so much understanding ji 👏🤗
You just gave me headaches with two languages you should make 2 videos different languages
Sir Video has subtitles , kindly check
English please
Sir , please turn on the captions