Replace TIE ROD and/or TRACK ROD END - VW Sharan 7N (Seat, Skoda)

Sdílet
Vložit
  • čas přidán 5. 09. 2020
  • Here's the link to my video where you can see control arm taken off:
    • Replace front suspensi...
    Here is the link to relevant page at our website (also available in printer friendly PDF format):
    www.wheelsandmotors.com/manua...
    Here's the link to our enthusiasts website with free online car manuals:
    www.wheelsandmotors.com/
    And here's the link to that "magic tool set" from the video:
    rover.ebay.com/rover/1/710-53...
  • Auta a dopravní prostředky

Komentáře • 31

  • @goahash
    @goahash Před rokem +1

    Tq for making this really good informational video. Really appreciate your effort.

  • @OsmanGaziPasha
    @OsmanGaziPasha Před 3 lety

    thank you very much for the nice video

  • @gabigavriliu4979
    @gabigavriliu4979 Před 4 měsíci

    Great video. What torque is required for the inner tie rod and the 18mm nut of the track rod end ? Thx

  • @arteomng1
    @arteomng1 Před 2 lety +1

    Thumbs up 👍

  • @GillmanAudio
    @GillmanAudio Před 3 lety

    great video thanks, i have a knock noise but only when parking at at very low speed in car parks etc no play when driving I guess it could be the same issue .

    • @wawayltd
      @wawayltd  Před 3 lety

      Best way to find out, raise the car, check joints and bushings, check for play.

  • @pyt22fr11
    @pyt22fr11 Před 11 měsíci +1

    Hi, very nice video however it does not say how to cope with the very little access available to tighten the inner side zip tie of the sleeve. Thanks all the same.

    • @wawayltd
      @wawayltd  Před 11 měsíci +1

      It's as tricky to explain as tricky to do it, but it's doable with a little bit of fiddle 😉

  • @shuvacse009
    @shuvacse009 Před 3 lety

    Sir! I am fan of yours...may i ask you why you are replacing these parts.....whats the fault...if you kindly explain...my steering shakes. I have replaced driveshaft and did balance and tracking. But still shaking. I have same car as yours..will be appreciated for your advice

    • @wawayltd
      @wawayltd  Před 3 lety +1

      The reason for replacing tie rod I showed in the video - it had developed pretty bad play.
      If your steering is shaking only when you braking on high speed it could be deformed brake discs. If it just shaking as you drive fast, could be a problem with steering rack. Get it checked. Good luck.

  • @Wiliuz
    @Wiliuz Před 3 lety +1

    Great video. Your sway bar bushing doesnt look good at 5:44

    • @wawayltd
      @wawayltd  Před 3 lety +1

      Yeah, probably. It doesn't give problems so far, I might replace them soon. Only 389.000 miles on a clock, what can go wrong 😁

    • @HamzaMirofficial
      @HamzaMirofficial Před 3 lety

      My front wheel makes tyres makes clanking noise especially on bumps. Plz do sway bar bushing video.

    • @Wiliuz
      @Wiliuz Před 3 lety

      @@HamzaMirofficial bushing not sold as separate item from vw, but available in polybush. There is a step by step on line at powerflex website. Clamps needs drilling, there ia a bit of work

    • @wawayltd
      @wawayltd  Před 3 lety

      Can be anti-roll bar link or track rod - it needs to be checked.

    • @HamzaMirofficial
      @HamzaMirofficial Před 3 lety

      WheelsAndMotors sway bar replaced 3month ago. Could be bushing? Will using WD40 on bushing stop noise? Saw someone on CZcams, will opening sway bar requires wheel tracking?

  • @t5jerry
    @t5jerry Před 3 lety +1

    use PLUSGAS, it`s MUCH better than WD40.

  • @foetab028forster9
    @foetab028forster9 Před 3 lety

    What keys are you using..are very long

    • @wawayltd
      @wawayltd  Před 3 lety

      What keys?

    • @foetab028forster9
      @foetab028forster9 Před 3 lety

      @@wawayltd fix head spanners i think they called in english ..those chrome tools

    • @wawayltd
      @wawayltd  Před 3 lety

      Don't know, I think they are normal size..

    • @foetab028forster9
      @foetab028forster9 Před 3 lety +1

      @@wawayltd ok :) wish you a happy new year and all the best

    • @wawayltd
      @wawayltd  Před 3 lety

      Happy New year 🍾🚀

  • @HamzaMirofficial
    @HamzaMirofficial Před 3 lety

    Also, as why are you replacing this? What issues does it give and why

    • @roliepolie7679
      @roliepolie7679 Před 3 lety +1

      Makes steering unstable and creates a bad knocking noise that's why u do it 👍