CZ SP-01 Cajunized vs CZ 75 SP-01 Shadow Competition
Vložit
- čas přidán 9. 07. 2024
- In this video I talk about the differences between the regular CZ SP 01 and the CZ SP 01 Shadow 1. I have changed some of the factory CZ parts from my 75 SP 01 in lieu for Cajun Gun Works parts. I have also added TruGlo night sights that are orange and G10 grips. The parts I changed are hammer spring, recoil spring, plunger spring, firing pin spring, trigger return spring and trigger pin.
well, here in Commiefornia we can't have the shadow series of SP01 pistols, we can though have the limited capacity SP01's. which is the one I have, I put a CGW, RRK kit, Race hammer kit, Mcarbo spring kit, Floating trigger pin, solid firing pin block pin, SS guide rod with an extra power recoil spring along with a dawson adjustable fiber optic sights on it. Difference is night and day, and is as smooth as my 1911's and sig P226's. I think it's way better than my 226's to be honest. Even with all the mods I put on the SP01, I have yet to have any malfunctions of any sort, even when shooting questionable reloads and steel cases ammo.
edit: forgot to mention, LOK grips are also worth looking at, I have the cowboy bebop in black,checkered with cherry red liners. the thing not only feels great but it also looks good.
Good looking toys. My sp01 is setup similar and I just spent 300 on sao trigger and Cajun gun works srt kit, still not happy with reset but the break is amazing
Yeah I didn't notice any improvement in the reset either after the parts I changed. The double and single action pull is lighter significantly but the biggest difference made was changing the recoil spring tbh.
You gotta get the race hammer. Makes the trigger pull so much smoother and the wall is more crisp.
I debated on if the hammer or sear parts were worth the upgrade. I did a little more to my 75b than the sp01. I got the cgw firing pin to see the difference for the 75b. Maybe if I add the hammer it will make more of a noticeable difference.
@@erik22lax ya dude I have mine basically fully cajunized and the hammer was the last thing I put on and man what a difference it makes in the pull!
I have a SP01, which kit do I need if I just want the slide lighter when I rack it and the trigger lighter as well.?
recoil spring (I use 12#), reduced power trigger return spring, plunger spring-change those 3 parts
The leaf spring in the grip of the spo1 is bound up . The mags should pop out just like the shadow. I had that same issue with mine
Ok I'll take it apart and look. Thx for the tip.
It has to seat down into the hammer spring plug more
@@mattmcdonald3845 I just wiggled it a little and seemed to do the job. ✌️
In your CZ shadow, is the rear sight adjustable or fixed ?
Fixed. On the Shadow 2 the rear sight is height adjustable
@erik22lax ok, thanks.
My cz 75 sp01, at 10 yards is 1.5 inches aprox. at the right side of the bull eye. What is the solution?
My rear sight is fixed as well
What grips are on the sp-01?
they are both G10 grips from Amazon tbh