IS300 Manual Swap - Pedal Installation
Vložit
- čas přidán 24. 08. 2024
- The installation of the clutch pedal and the brake pedal is a little bit rough! There's almost NO room in the footwell. All I can suggest to make it easier is to move the seat all the way back... or even take it out, move the steering wheel up to its highest point, and finally, remove the lower part of the dash under the steering wheel.
This is it! The gearbox preparation for the Lexus IS300 manual swap! This was an awkward one to film, and I came up against some pretty annoying challenges, all of which were overcome thanks to a few friends! :)
Torque specs (which I didn't worry about in this video):
www.shoarmatea...
George Hampl's video series:
Part 1: • ANOTHER ONE! | IS300 m...
Part 2: • Project IS300 manual |...
Part 3: • Manual Lexus IS300 is ...
Parts list:
Clutch Master Cylinder:
I USED THIS ONE: www.amayama.co...
BUT DON'T DO THE SAME!
USE THIS ONE: www.jdmgarageu...
Reinforcement Plate:
www.soarsperfo...
Pedal Covers:
www.amayama.co...
All music by Zircon:
1st song: Spire
2nd song: Take the Metro
Outro song: Augment
You can buy his music here: zirconstudios.bandcamp.com
Artist Website: zirconmusic.com
WARNING: I used this clutch master cylinder: 31410-53020 - but if you're using a J160 gearbox, you should 100% use 31410-53010 otherwise you'll have clutch issues like I have now!
U sir, are great teacher. I drive IS200 manual , dont have to watch these videos , but it is a such pleasure... Great job, once more. Cheers!
That’s very kind of you! 🙏🏻 I’m glad you enjoy the videos. There many many more to come!
Always a nice surprise to see these show up. I know I'll be looking back at these repeatedly as I get started on my IS
The manual swap is done and it was a very frustrating experience 😅✌🏻 thanks so much for watching! 🙏🏻
Cracking videos so far Paul. Maybe worth changing the link for the clutch line though as we established the supra one routes wrong..
Will do, will do! 🙏🏻
is this a lhd clutch assembly or is it an altezza clutch assembly? they look to be the same as far as the bracket goes, but ive read that some people say the Toyota Altezza clutch pedal assembly doesn't fit but i cant find a video or reason of them saying why it doesn't fit
Yes it is. It fit just fine, but in the end I did swap it out for an IS200 one… even though it made no difference 😅
Edit: Actually, it’s a US IS300 CMC 👍🏻 not a LHD EU IS200 CMC.
what assembly is it though? im trying to figure out if i can actually use the toyota altezza bracket or if i can only use the 55107-53030 USDM clutch support bracket
@@shizukesajdm
@@user-go5pm7jg7c All links are in the description. I don’t know anything about a bracket though 🤷🏻♂️ sorry.
Your IS300 is RHD? @@shizukesajdm
@@user-go5pm7jg7c Yes 👍🏻
How much was all the bits you needed? And how much would you charge to do the job?
I’ll be going through that in a future video! :) I’ll probably never do it again! 🤣
@@shizukesajdm I wouldn't expect you to do it on the floor again I've got a forklift that would make it alot easier for you👀😂
@@Mx5Man The main thing is having the time to do it! 😅 Are you talking about the pedal installation or the complete manual swap?
@@shizukesajdm the complete Job, and to be honest mate I'm not in any rush😂