AtomRC Penguin - "not just another" Review ;)
Vložit
- čas přidán 31. 05. 2024
- AtomRC sale link: atomrc.com/collections/fixed-...
I stand for HONEST reviews and opinions! If you can support this idea please visit my PATREON page: bit.ly/2ESMtIO
●▬▬▬▬▬TECH SPECS:▬▬▬▬▬▬▬▬▬●
Wingspan: 750mm
Length: 640mm
WingArea: 15.06dm²
Material: EPP
Servo: 3pcs 9g servo (preinstalled, silent)
Motor: two 2004/2206
ESC: BLS 30A~4S
Propeller: 6026-2
Battery: 2000~3000mAH 4S Lipo/LIION (200~300g)
with O3: 140-370g battery weight for proper CG
Video: DJI O3
Control: CRSF nano
FC: SpeedyBee F405 WingFC + Matek M10Q GPS
INAV settings: l8.nu/sGRM
Firmware 6.1.1 flash:
had to disconnect GPS for it to work, all other connections were ok (using the Boot button method, and "no reboot sequence in software!)
PIDs: (considering my hardware setup or servo horns!)
set fw_p_pitch = 15
set fw_i_pitch = 5
set fw_d_pitch = 5
set fw_ff_pitch = 52
set fw_p_roll = 15
set fw_i_roll = 3
set fw_d_roll = 7
set fw_ff_roll = 36
set fw_p_yaw = 50
set fw_i_yaw = 0
set fw_d_yaw = 20
set fw_ff_yaw = 255
Settings:
MAH Scale = 242 (not 195)
set current_meter_scale = 242
to have AUTOLAUNCH start the engines after 1sec (not when throwing)
this is important, because I had some issues where not both motors started upon "shaking" / throwing for takeoff
set nav_fw_launch_idle_motor_delay = 1000
set nav_fw_launch_idle_thr = 1400
(was 1000 ~ 0% thr)
UARTS: (using the Speedy F405 Wing FC)
U1 = CRSF
U3 = GPS
U5 = DJI
Mixer:
S1 Motor left, S2 Motor right
S3 Elevator
S4 Aileron Left, S5 Ail right
GPS Conn on F405:
from below, LEFT to RIGHT
SDA empty
SCL empty
4.5v RED
GND BLACK
TX3 WHITE GPS RX
RX3 YELLOW GPS TX
Matek M10Q GPS:
viewed from above, GPS Ant side, LEFT to RIGHT:
5v RX TX GND
●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
INAV settings: l8.nu/sGRM
AtomRC sale link: atomrc.com/collections/fixed-...
Penguin Infopage: atomrc.com/products/atomrc-pe...
iFlight O3 heatsink: shop.iflight-rc.com/DJI-O3-VT...
DO YOU WANT TO SEE MORE???
►TOP Videos: goo.gl/MHfr1D
►Mountain DIVES: goo.gl/FfXPHa
►Product REVIEWS: goo.gl/mZkwHr
●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬●
my Hangar: goo.gl/QNzck
Filmed with: GH5, Sony A7c, edited with Premiere Pro
thanks Damian, Raphael, Luigi and Markus for helping me with the external shots!
●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Shut Up - Mindme
I use EPIDEMIC SOUND, get your account here (affiliate): bit.ly/3p6OGE0
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → goo.gl/szFJv
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!)
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
(¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯)
► Discord Server: / discord
► RCSchim@gmx.at
► / rcschim
► / rcschim
► / rcschim
► / rcschim
► rcschim.BLOGspot.com
●▬▬▬VIDEO INDEX▬▬▬▬▬▬▬▬▬▬▬▬●
00:00 Intro
00:03 unboxing
01:00 BUILD tips
02:13 Control surfaces
02:47 INAV
03:44 Maiden & music montage
07:21 weight
08:23 Autolaunch PROBLEM... and fix
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
#RCSchim #atomrc #penguin - Zábava
AtomRC sale link: atomrc.com/collections/fixed-wing-sale
I stand for HONEST reviews and opinions! If you can support this idea please visit my PATREON page: bit.ly/2ESMtIO
INAV settings: l8.nu/sGRM
iFlight O3 heatsink: shop.iflight-rc.com/DJI-O3-VTX-Heatsink-Pro1915
Thanks Damian, Raphael, Luigi and Markus for helping me with the external shots!
more infos in the description of course!
greets, Mario
That sandpaper trick from Lee @painless360 is golden; my Dolphin, Penguin, and Airloader are all rocking some 600 grit now lol
Great choice of music in this one, Mario, my head was bobbing to the _shuuuut up up up_ until I realized I was being gawked at by my girl :)
Nice unboxing, build. Awesome flight video. The sequence from 4:50 leading up to the move at 5:25 was spectacular. A shoutout to the camera pilot. Overall, another excellent edit.
Awesome flying and review, Mario! 😃
This little plane is really impressive... It's so small, but yet so smooth!
Anyway, stay safe there with your family! 🖖😊
Thanks Mario! For the one shot, where o fly thru trees and s buddy chased me, this was also a Mario ;)
Great video. Thanks for sharing the Iflight heatsink, I'll be ordering one today.
those aerial shots, phantastic!
Thanks, I'll forward this to Raphael, I agree, he did a great job with his drone!
that was fun, maiden and music montage was brilliant. ps. my first little runcam hd cam i made a lens hood that closed over the lens in a crash, i did contact runcam with photos but they said they had other ideas. it wasnt easy to show how and why it worked in photos but it did work really well. probably worth looking into with an 03 unit now
Thanks Mac, I guess I should just print the whole nose in tpu and make a little bumper for lens protection. Also I use nd filters as a layer of protection against scratches.
Greets Mario
@@Rcschim yeah did that thing where i put a foam (from the runcam box i think) lens hood on which showed up in the camera and i slowly cut away till it was out of view, then realised if i cut an angle above and below the hood would be forced down or up in a crash which would cover the lens, wish i could make one for the hero6, so tired of buying nd filters.
Love these types of videos
Und schon wieder ein Flieger mehr auf meiner Wunschliste. Nice review
Meine auch MfG
Ja der ist auf jeden Fall spaßig. Ist auch gut zum verfolgen von langsameren Fliegern
Great video, loved it mate! Well done.
Wieder ein tolles Video. Die neue Brille steht Dir gut. 👍
Danke, dachte zuerst an die fpv Brille, aber die ist doch alt;)
That was a relaxing flight. You have convinced me to get a wing... and learn iNav. 😊
Wings are fun for sure! They give you a direct sense of flight, wind, scenery. Was on vacation, flew an Air3, but now I need to fly fixed wing again!
Reviews are what we live for. We buy, we FLY.
You also need to check if your elevator servo is secure as mine was loose and popped out when I adjusted the control horn that I have to re-glue and put screw on it.
Great video! The Penguin is quite the plane isn't it? It's not quite like anything else I fly, but super fun in it's own right! lol
Yep, high alpha creeping thru the woods would be its speciality ;)
Glad you use delay for launch now. Shake & Bake is not the way to go.
I use it with delay on all inav planes normally, but here I forgot this option initially. Also bad if you have 2 motors and not both arm for some reason...
Hast du einen Tipp wie man in das Thema Wing mehr eintauchen kann ? Fliege bis jetzt nur Copter und das Bauen eines Wings schreckt mich noch etwas ab... Leider gibts auch keine digitalen BNF Angebote....
Mein aktueller Favorit ist der Dolphin. Da gibts ein PNP mit RTF (also mit deren eigener FC). Das ist ein guter Startpunkt, da war vieles schon fertig (schau Dir mein review dazu an). Dann noch einen CRSF (oder sonst einen RC) anlöten, eine O3 (oder vista...etc) und die Inav settings von mir.
Zu Inav hat Painless360 oder Pawel Spychalski gute tutorials - ist aber wirklich nicht viel anders als Betaflight.
Das Beste an Inav für mich ist sicher Autolaunch ;) viel Spaß!
Thanks for the very nice review! I'm curious, how's the flying experience compare with the Dolphin?
Hi my Friend! It flies fun! Can be flown much slower - but has a bit of a YAW wobble if you fly faster than 100kph.
Can fly high alpha and then VERY slow (have to train this - then I can fly thru the woods ;)
it likes to be flown in smaller area, maybe with obstacles - near to the ground. up in the mountains it would feel a bit out of place I guess..
@@Rcschim thanks for the detailed information. For me, the Dolphin is almost too small and so the Penguin is defenetely too small. I enjoy a more long range and fast flying wing, so what you say finalize the doubts for me about the Penguin. Thanks again my friend ☺️
May i know how to mount the O3 transmitter?
It is mounted on the plastic parts for the nose, quite easy to install, but a bit exposed on crashes ;)
Rcschim, want to share. I use O3 with iFlight heatsink with 5V cooling fan mount on heatsink. I am able to power on Heewing Ranger T1 in fully enclosure while grounded. With fan still spinning, it can be grounded indefinitely without worrying about overheating.
iFlight heatsink for O3 is a must have for anyone who puts O3 in fully enclosures with vent. Or add cooling fan when in doubt (ie: summer season)
I enjoy your video, I am in market for one more fixed wing that can pack up in a case for portability. How do you pack up? I see servo wires still in there after you remove the wings?
Yep, heatsink is a good idea. didn't do it yet but have fans on my bench.
my flying buddies did tell me also how great the T1 is. Currently I'm back to copters again - love their steady flight...
looking forward to flying the Dolphin in Spring again tho. And maybe the Mars and ARWingpro. Didnt like the Penguin enough to keep the O3 in there - went on another copter. Maybe I'll use one of my old Vistas to have an easy ground level basher plane? it flew like fun for sure (and such a thing is great for FPV meetings).
greets, Mario
@@Rcschim Yes, I wouldn't send my precious T1 as ground level basher. 😂 That is why I research about Dolphin. Their page says it can steer thru trees in a park and has good low speed without stalling.
If you have any more ground level basher wing to mention, please do share. 🙏
@@kibbycabbit I guess you meant Penguin instead of Dolphin here ;)
My fpv 900 from tech one was a nice careless flying wing until it was grounded. See fpv meet 1-23
Great video. What was the reason for the crash during auto launch?
Only one motor started for some reason.
Later I changed so that on auto launch the motors start after I use half throttle rather than throwing.
This way I can check better if both are spinning.
oh no! Dont shake and throw!!!