Vintage Belt Sander Restoration
Vložit
- čas přidán 4. 07. 2024
- I bought a vintage belt sander from a used tool store. Through my research, I discovered it was manufactured by Makita, model 9400, in Japan. When I found it, the shaft was seized and it was quite rusty. In this video, I will restore its functionality. I hope everyone enjoys the video
* Belt Sander Information *
- Brand: Makita
- Model: 9400
- VOLTS: 100-110V
- Power : 880W
- Curent : 8A
- Frequency: 50/60 Hz
- Belt Size: 100 x 610 mm (4 x 24")
- Belt Speed: 400 m/min
- Net Weight : 8kg
I'm very happy to receive your feedback, advice, suggestions to improve myself.
-------------------------
Like and subscribe to support the channel ^^
Thank you so much for watching !!
Have a nice day ^^
#restoration #restorationvideos #restore #repairwork #beltsander
-------------------------
Content
0:34- Intro
10:36- Disassembly
21:36- Restore and clean
32:43 - Complete and check operation - Věda a technologie
![Someone paid an equivalent of $2000 for this in 1914 [Restoration]](http://i.ytimg.com/vi/rw_8FWJuSho/mqdefault.jpg)
![Someone paid an equivalent of $2000 for this in 1914 [Restoration]](/img/tr.png)
For €30 I bought a very old belt sander Makita 9924DB...it is in excellent condition and works...just a little dirty, rust etc...I already have all the bearings etc...I will also restore it😃
Good video...keep it up.👍
Hope you can bring it back ^^
Another great restoration! I love it that you just get on and fix things, no fuss, no drama, just broken to working. I look forward to the next one!
Thank you very much ❤️❤️❤️ have a nice day
Who else groaned when that piece broke off from the stuck bolt?
🥲
Consider the Zen of sanding the sander....
zen??? I do not understand
In this context zen means “pondering the meaning of existence, raising one’s consciousness of reality.”
Excellent restoration, but not everything needs to be painted....like the 2 rollers and flat plates.
Yepp, I was also wondering if I should paint it
Wait!, the sander was jittering so much because he wired it wrong, it was running backwards...watch which way the belt turns lol
😅Yepp you are very observant, I had to reverse the wires
Con el lujo de detalle, esmero y dedicación japonesa... Resultado esperado!. Formidable trabajo 😊. Saludos desde Irapuato GTO, México.
Many thank my friend ^^
Nice refurbishing job. I felt bad for you when you broke off the corner when removing the screw that was holding on the plate. But you welded it back drilled and taped it and made it work. All in all, it came out nice. A great color for the sander body would have been a hammer stone silver grey. But it still looks good how you painted it. Thumbs Up!
Many thank ^^ have a nice day
"Tapped" not "taped" 👍😊
@@jasoncdebussy
@@hbrestorationI have no idea what those emojis are meant to convey 🤔
@@jasoncdebussy nothing, just kidding. I want to write something but don't know what to write😅
Push in a bearing by the outer race not the inner race.
Pressing on the shaft will apply force to the inner ring
Very old to very new. But you know what they say about used tools? All they need to do is the job. The job doesn't need pretty tools.
I understand what you mean. It's like buying a new tool, it's better
@@hbrestoration No, I didn't say that. I'm meant that it doesn't matter if a tool is new or old so as long as they do the job. Having said that, its very good that you restored that tool because during a restoration you can find issues that need attention like a worn bearing, or belt drive that slips, or a crack in the housing like the one you found on the sled. Here's another example: my dad had a very old Craftsmen Drill that quit working so my dad got another drill that had a better chuck. So he didn't throw out the old drill. So I restored it and polished it's aluminum casing, and doubled the length of the cord. I replaced the chuck with a newer Jacobs chuck. Next, I sharpened all 100 of his drill bits. So he gave me his other drill, which I used for 10 years until the first cadmium battery drill came out and I got that.
@@robertblahnik7685 I think so too, it's great that you have such a great tool, what's more meaningful is that it's associated with a memory with your father.
A melhor lixadeira do mundo, eu tinha uma dessas, só na fera da marreta da pra, achar uma dessas ainda.
but it's too heavy 🥲
good job and. using torch whit wd40 for the tight bolts.
I used wd 40, but no luck
I think I would have polished the body of it but personal preference, looks great.
Thank you I will try to do better next time
@@hbrestoration nothing wrong with it, it turned out great, i just like polished aluminum
I was thinking it would look good polished, but then remembered restoring an ELU MHB 90, After fully polishing the case (took ages0 the motor let out the blue smoke, so now it's on a shelf and may get a rewind some day.
Good work on that one, it's always gratifying to see old power tools brought back.
many thank ❤️❤️❤️ have a nice day
And then put to use!
استمتعتُ بعملك الجميل..
من لحظة بداية الفيديو وأنا أتساءل: ما هذه الآلة، وما عملها؟ وجاء الجواب واضحًا في الثواني الأخيرة..
شكرًا لك على هذه المتعة..
many thank, have a nice day ^^
Restaurada lixadeira de cinta 😉
Thank you very much ^^
Have a nice day
Invest in some soft jaws for your vise!
Many thank 🥰 I will pay attention to it
Very nice👍🌹👏👏👏👏
🥰🥰🥰 thank you
Very good
❤️❤️❤️ many thank
Maravilloso video, y excelente trabajo mis felicitaciones
Thank you ^^ have a nice day🥰
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Many thank🥰🥰🥰🥰
Great video and authoritative teardown and rebuild. I restored two of these. One is a Makita and the other branded Wolf (made by Makita). I use one for sanding and one for pulling out vehicles stuck in mud. Joking of course, but they are a beast of a sander.
Not sure why yours was bouncing around so much, which it shouldn't. Maybe a belt bump issue?
because my sandpaper has a burr
Beautiful restoration job you did restoring that belt sander. It looks much better and it works like a charm too. Just like new. Excellent work.
Thank you very much ^^ have a nice day
Well done my friend, from, Bayamo, Cuba
Thank you Cuban friend❤️
Nice
thanks 🥰🥰🥰
I don’t know how 😊they can disassemble and put it back together without an assembly book!
Complex machines may have to use it😅
he can't, he rewired it wrong, the belt was going in reverse! check it close, you can see it rofl
Спасибо класс.
❤️❤️❤️ many thank
Very well done my friend!👍
❤️❤️ Thank my friend 🥰
マキタ電気ベルトサンダーや！
yepp
24:53
One of the screws was still quite loose.
You are very observant and have discovered that, when testing the device, I must have plenty of energy
Very nice restoration
🥰🥰🥰 many thank
Nice restoration👍🏻😊
Many thank ^^
Nice restoration 😊
Many thank ^^ have a nice day
Great job 👏👍👌❤️
❤️❤️❤️❤️ many thank
Exactement la même conception que nos bidules en plastique actuels 😢
It's much heavier, it's tiring to hold 🥹
Doesn't sandblasting hurt your hands?
I don't spray it on my hands, it's very dangerous to do that. Warning, don't do the same as me
Didn't realize a tool from 2016 was vintage?
😅
Superb
❤️❤️❤️
How'd you fix the giant crack in the planer housing? It looked like it went through and through and was several centimeters long.
I have done it video
8:57 - хотел починить - доломал...
🥲
ou avez-vous acheté vos bandes de papiers sablés de 27 pouces. car jj'ai vintage de 1950
Is there any e-commerce site where you live or you can search on google, there are many, size 610mm
😍😍😍😍👌👌
❤️❤️❤️❤️
Parece um tanque de guerra da ww2
Agreed, I see it too😅
I just read the specs on the sander and the thing that really caught my eye was the weight 8 KG's. WOW Some mauls or sledge hammers wern't that heavy. Do you know the year Sir?? Great job and have a nice one. I am only at minute 9 but you always do a fantastic job. Please have a decent Week.
it's quite heavy for me, I tried and couldn't find its year of manufacture
@@hbrestoration Thank you for that. And nice work. Looks great
what caught my eye, that the belt was moving in reverse...he wired it wrong, check it
Много смазки,она греется сильно.
I will pay attention to it
😢😢😢
🥺
После того как этот "мастер" отломил кусок от алюминиевого корпуса я выключил видео. Это ужас.
Should I cut it off and act like nothing happened?
My friend, I'll let you know if someone steals your video.
many thank my friend ❤️
I also know a few channels that do that but there is no way to handle it
Liked everything you di from the recording, to the restoration to the editing, however, it's what you didn't do that will prevent me from subscribing at this time. You didn't provide any information whatsoever on what steps you were taking once you had deconstructed the sander. I want to be able to follow and you didn't provide that. I'll check back at a later date to see if you've added it. Good luck.
thank you for comment
28:34 Your squeezer is upside down.
no no 😂
@@hbrestoration
🤩☺️😁😀😇🤗👍🤓😎💯😊
🥰❤️🥰🥲🥰❤️
👏🥃👍👏🥃👍👏🥃👍👏🥃👍👏🥃👍👏🥃👍
❤️❤️❤️🥰🥰🥰
👏👏👏👏👏👏💯💯💯💯👍👌🇧🇷🇧🇷
❤️❤️❤️🥰🥰🥰
I hope you will enjoy the video 🥰
Yes absolutely wonderful
❤ está bien el trabajo que realizan @@user-tp7jd4ok1o
❤🎉🎉⭐⭐🎀🎀
😘😍❤️
Статор и ротор если и были живые после такого
Ремонта не выжили! Это не восстановление...
😅
second
Thank^^
fake
🥲
First
❤❤❤
Kỹ năng quá kém . Không cẩn thận ở những nơi khó thao tác 👎👎👎
Which operation, can you explain to me?
Thao tác nào ạ, bạn có thể chỉ rõ cho tôi