'Teck 1' Tobacco Cutter Restoration
Vložit
- čas přidán 28. 08. 2024
- ► Support my work and get early access to Director's Cuts and weekly updates:
/ misterpatina
► Follow me on Facebook:
/ misterpatina
► Follow me on Instagram:
Instagram: / misterpatina
► If you like my work, hit the like, subscribe and share with your friends!
► Any questions to the materials, techniques, or something else? Write in the comments!
► Feel free to write ideas for future Projects in the comments!
Hey folks, in this Video I restored an old Tobacco Cutter!
I think its from the 1950´s regarding to the screws and the way it was built.
The Cutter has a feeding mechanism which feeds the Tobacco plants into the cutting wheel by turning the wheel. The 'pressure roll' holds all the plants in place and presses them on the feeding roll.
The restoration contains powder coating of cast iron parts, a lot of polishing, sanding, nickel plating, knife sharpening and also wood work. Some parts were restored off cam (screws and pins).
The final test shows that the Tobacco Cutter now works pretty fine again!
Thanks you fine people! ♥
18:38 excuse me....what????? 😆😆😆
😉😘
With the spaghetti slicing at the end you secured the life long wrath of all Italian viewers for sure!
I‘m glad no one knows my face 😅
Might show it to my Italian mate, just to see him screaming inside.
I was going to write it
I remember there is a youtube short that would say "Not Approved!"
I will not send this to Pasta Grannies. I will not send this to Pasta Grannies...
I actually really like the use of the panning camera to display the finished product and the befores and afters 👌
powder coating the cast pieces always a winner , looks so much better than a spray finish. nice job. so many fake resto channels out there nice to see a real one.
ahh. sliced spaghetti with leek and carrots. My favourite!
So pleased you saved the original wooden board .... really enjoyed watching 😊
Such beauty! Loved that you didn't replace de wood and salvaged it instead.
"Hawk tuah"... I had to google it. Made my day! 😂
Spray on that thang! 😅
Jesus do you live under a rock??
@@madmax82988 Me? No. But I'm german and I don't know every english phrase.
Damn that was funny! I had google it too!
@@Knilch58 it's not really a phrase, it's an *_extremely_* viral video with millions of views that's now turned into a meme; that has spread across the world. Even Germany I bet.
It's sad we won't see another Mister Patina video after he's arrested by the Italians for crimes against pasta.
They’ll spaghetti-cuff me!
WTF?,???????
Immer wieder sehr beeindruckend, wenn diese alte, analoge Technik wiederbelebt wird.
I was today years old when I realized, thanks to you that a sponge is the perfect way to apply paint to the text on things. Thank you. Lol
I absolutely love the slightly darker lighting, it's still clear and easy to see, but I especially love it because I watch these videos to fall asleep. Yhank you so much ❤❤
Youre welcome, iam glad you like it!
Great job, Mr P. Love your work 👍
Edit: Hawk tuah 😂😂😂😂 When you know, you know.
Yeah...the fact that everyone knows, proves shes right ^^
Beautifully done sir 👌🏽🙂
Thanks a lot! 🙂
"Run for your life" 😂 you had my 👍🏻 at that moment.
Haha!
Greetings from Saint Petersburg!
My friend, Mr. Patina. I can't write a good comment right now that you would like. And I don't want to write banal words or cliched phrases. I'm just tired, a lot of work. But I'll definitely come up with something good and kind for you and for everyone. And don't be afraid of the Italians, I made an agreement with them long ago. I often break spaghetti into small pieces myself and, as you can see, I'm still alive!
You did such a great sealing job! it's absolutely leek proof!
Your channel is among amazing. Every time i see a notification i click within a second, sometimes i see your notifications pop through during work but i take some time when im on my lunch break to rest and enjoy so amazing asmr. Please keep posting some amazing content and god bless you brother
Thank you so much my friend!
2nd time I’ve watch this, still an amazing restoration, like the detail and care put into the project, thanks again, enjoyed watching again.
Thank you so much!
Looks great as usual! You do wonderful work, Mister P. Love to see it!
Thank you so much!
hahahaha, your great sense of humour is way up there with your concourse restorations - Mister Patina - you're the best!
Thanks Andy!
End result is amazing. Congratulations.
I'm pretty sure that most (if not all) of the italian fans are insanely mad at you right now. 😂😂😂😂
I hope they don’t cook me
@@misterpatina, just hold their hands and they can't even complain about it. 😂😂
A truly satisfying and relaxing video!
Iam glad you like it!
You did it well 👏👏
The perfect accessory for any pipe smokers man cave. Lovely job. Regards from Scotland.
If you'd boiled the leek, carrot slices, and pasta confetti, you'd have a pretty decent soup.
Качественные вещи делали😊
That was very nicely done, especially the restoration of the wooden parts. I didn't know that was possible. The demo at the end was great since I detest tobacco companies and smoking the stuff. I don't blame the plants though. I'm sure none of it was their idea.
So in love. After a stressful day this helps me to calm down and fall asleep. And then I watch it again the next day to see the result 😂
Im glad you enjoyed...twice :-D
Amazing work man, Just make a Compilation video of all the sand blasting you have done, Please
Great idea, ill keep it in mind :-)
It looks great and you did a wonderful job restoring it as well!!!!
I enjoyed your video so I gave it a Thumbs Up
Thank you so much!
Satisfaction Cabinet is the best way to describe a sand blaster. I love it.
Great video and excellent restoration, as usual. I love the humour and that you saved both pieces of wood when it would have been easier to replace them.
Thank you so much! Im glad you enjoyed!
Satisfaction cabinet? What an accurate way to name it!
😉
Excellent Job!
Thanks!
LOVE that you always save the wood whenever possible. Kudos!
Excellent as always Mr. Patina 👏👏👏, thank you. Now - Chuck all that stuff in a frying pan with some cumin, coriander and paprika, and have yourself a nice lunch 😁. 😎
Haha - Thank you so much John!
perfecto como todo loque hace!!! gracias por el video.
Excellent content. Thank you!
Thanks for watching 🙂
Missed an opportunity, should have called it the sandisfaction cabinet!
😅
Perfect restoration 👍
Thanks!
Love the videos. Ive been watching foe the last year, and its the best fall asleep. Problem is that it gets too interesting and you have to watch too the finish. Great work am I admire the time and effort that goes into this. Al the way from South Africa
Thank you so much! Greets from Germany!
Another stunning restoration. Love the nickel plating, attention to detail and how you repaired and re-used the wooden parts. Thanks heaps for sharing.
Iam glad you like it!
Great project, scrubbed up alright.
Using the lathe to get the shaft out was clever... always the simple ideas that are best.
Hello mister Patina beautifully restored good job
Thanks a lot!
It certainly makes a rather satisfying sound when cutting. Thank you for the upload, and I look forward to your next video.
Wonderful job
Thanks!
Gut gemacht 🙌
Danke!
You should do some old tonka toys or something similar!
I love the attention to the detail in this restoration, it would have been so easy to cut a new piece of wood but that would have lost some of the originality, bravo for putting in the effort to reshape that board!
Золотые руки у Мастера ❤❤❤
A beautiful work u did on that cutter sir awesome restoration sir beautifuly done 💯💯💯💯💯
Thank you so much!
The Hawk Tauh is here too... My god x.x
I love the whole process, but the powder coating is always my favourite part!
Set screws really grind my gears. It works great if the shaft has a flat face or matching tap, but in most cases, it's used with a round face as part of a cheap design.
Круто, люблю ваш, канал 🤝🇧🇾
WOW! Überragend das du das alte Brett gerettet hast! Good Job!
Danke!
Cutting threads to the music of the Ramones? Gabba gabba hey! 👍
Haha!
Italy on the verge of war after this spaghetti slaughtering ! Love your restoration.
Un objet rare et beau qui a hérité d’une magnifique restauration de qualité professionnelle. 👌👍 bravo monsieur Patina.
Merci!
Great job.
Thanks!
1:43 Hawk tuah is worldwide omg
Formidable restauration !!! 👍
Great job sir ji
Mister Patina espero que no se te suba a la cabeza pero para mi eres el mejor haciendo videos en restauración saludos desde Canarias
Muchas gracias amigo!
@@misterpatina siempre a ti
Brat, I remember your first videos.
And what a classy badass daddy. And so smoooooth, ooof.
I’m happy for and with you!
Thank you so much my friend!
Beautiful restoration job you did restoring that tobacco cutter. It looks much better and it works like a charm too. Excellent work.
Another great restore, Herr P. I do love watching your processes. Lots of work to produce a mandoline - was a bit surprised by the ending...😉
Coffee and Patina.what better way to start your Saturday?😎
As I know that tobacco consumption is increasingly falling and anti-smoking is in vogue, a suggestion to continue using this piece is to reuse it as a salad chopper. Such as being used to chop chard to produce kimchi (a typical Korean dish).
Your videography has just kept getting better and better! Really neat piece to restore too!
Edit: 19:20 Pro tip: Point the epoxy bottle tips up, tap the liquid to the base and then gently squeeze up to remove the air bubble (like what you see doctors and nurses do with syringes) so you get a consistent amount each time
Thank you so much, I’ll keep it in mind!
I’m thinking it’s begging for red paint on the outer swirl of the rotor with handle. Sure would like to see it in action cutting the leaves. Great job!
*What a fascinating machine 🙂 Thanks for showing us it from when it was a total mess to being a absolutely amazing machine 🙂.*
Iam glad you like it! :-)
beautiful restoration. your nutela would be sick again😄😄
Another piece of history saved from the scrap heap.
"satisfaction cabinet" is a great name for the sandblaster
Amazing job my friend congratulations
I was today years old the first time I heard the term "satisfaction cabinet," but I will never forget it!
Haha, I could be there all day!
There's something really cathartic about watching these videos but one question I always have is do you always know what these machines are and how they should work or do you have to look them up as I'd have no clue I've never heard of a tobacco cutter lol. Keep up the good work one of my favourite channels
Thank you so much! Most of the machines are bought online or given to me from the previous owner, they can at least tell you what it is :-D
A little bit of knowledge and experience, and you know how they have to work :-)
Hawk tuah and the satisfaction cabinet in the same video ?!?! OH MY ! 😮
🤣🤣
Love how you squeezed in the hawk tuah 😂 awesome video man
Haha, thanks!
I'm quite surprised you used the "hawk tuah" reference lol
But otherwise, another great restoration by the "buddy" himself. 🙂
I just couldnt resist :-D
Thank you so much Mark!
I love this so much. Thanks Mr. P.
Leek, carrot and spaghetti tobacco!
It might just be the next addiction!
...nice restoration 👍🙂🇬🇧🚬
Haha! 😆
Наблюдать как вы работаете , прямо релакс 🧘!!!
Молодец вы 👍
Spasibo
This is a beautiful restoration.
Hooray for Mister Patina! Hooray for the satisfaction cabinet! 😁
Haha! Thanks! :-)
sweet!
Now I have that bit stuck in my head!
Nice work, but I wouldn't recommend drying and smoking the leek!
beautiful restoration!
Ah yes, Castro's preferred type - no.5, standard length
Mesmerizing! Love your work!
Thanks! I’m glad you like it!
Золотые руки.
You can’t pull a hawk tuah on me only two minutes into the video, I’m trying to relax and go to sleep here 😂
🤣🤣🤣
Bruh, I'm Italian, you should have a life sentence for that spaghetti! 🍝
Except for that I love your videos and your irony 🏌️
Haha, thank you so much! I’m glad you’re not mad at me 😅
Restaurado cortador de tabaco 😉
Beautiful restoration 😊
LMAO, I too cut thread to the beat of "Hey Ho, Let's Go"
Learned that little trick from my metal working teacher ages ago, and I still do it.
And in case anyone wonders what that actually means.
"Hey" One Full rotation forward.
"Ho" Half a rotation back.
"Let's Go!" One Full rotation forward again.
That way you limit the chances of breaking the thread halfway through.
It’s even more funny when I tell you, that this song came to my mind out of nowhere, when I cut the thread. Just 'heard' it.
Thanks for your comment my friend. Funny how things come together sometimes..
This guy chopping spaghetti... trying to start a war with the Italians. They despise when their beloved spaghetti is in pieces.
😂😂😂
Les italiens sont en sueur quand tu coupe les spaghetti 😂