Gun Restoration | Colt Model 1903 Pocket Hammer, (with test fire)!
Vložit
- čas přidán 5. 07. 2024
- #restoration #restore
Here is an amazing part of design history for colt modern handguns. The restoration of the colt Model 1903 pocket hammer. The Colt pocket hammer was modeled after the Colt sight safety and Colt 1902 Sporting and military models. This model has no slide stop or safety. This model was different from the 1911 in the fact that it had two barrel link pins rather than just the one. The 1903 also had a huge design flaw. The rectangle locking pin at the front of the slide could brake sending the slide right into your face since the takedown of the slide was in reverse of the 1911. All in all the model had its drawbacks and maybe one positive. This pistol was ambidextrous due to no slide stop or external safety. Hope you enjoy the video and as always thanks for watching. Please consider subscribing for new upcoming videos.
Pay Pal account, paypal.me/thekinzlerbros?loca... - Zábava
Watching these always makes me want to go clean something
Ya that makes sense, thanks for watching we appreciate it!
It's always good to see a bit of history saved from the scrap heap and brought back to life. Your channel is the gold standard of gun restoration. Thank you!
Absolutely, thank you for the kind words we appreciate you! Thanks for watching.
Those results were amazing. With a replacement barrel that pistol would be as good as the day it was made. Great video.
Thank you we appreciate it, ya a new barrel would be the finishing touch. Thanks for watching!
The guns look better and better with each restoration! Keep up the fantastic work!
Thank you very much, will do!
I personally appreciate the voice over explanation of what you’re doing and why. Thank you for sharing and the video, not to mention saving another handgun.
Thanks for the feedback, we appreciate you and thanks for watching!
@@TheKinzlerBros I respectfully disagree. While I appreciate the knowledge transfer, I use these videos to wind down before going to sleep, dialogue doesn't help with that. Your videos though, do what you like.
God made man Colt made them equal thanks for the vids Bro’s .
That's right! Thanks for watching
Delighted to see another Kinzler Broseley video dropped this morning 👍
Hope you enjoyed it! Thanks for watching!
Nicely done, lot of detail👍
Thanks we appreciate it, thanks for watching!
Mesmerizing videos. If you could make twenty of those a day, I would watch them all. Thanks for posting.
Thank you for the kind words and I would if I could. Thanks for watching
Really nice to see someone correctly restoring these. Great work
Ya there are a few hacks out there. Thanks for watching we appreciate it!
Correctly restoring them maybe. But they are intentionally rusting these firearms, and then putting up this Farce like they're saving them 😣
@@TheKinzlerBrosjust don't understand why y'all intentionally Rusty things and then act like you're restoring them you're using vinegar and saltwater... it's seriously just so dishonest
Nice job man
Thanks!
Very nice work....powerful enough its day too.
Thank you, absolutely! Thanks for watching
Awesome restoration as always! 😎👍 I love how the parts comes out clean after glass bead blasting. Top level gun restoration channel on CZcams! 👍
Thanks for the kind words and for watching!
Nice 👍👍
Thanks 👍
The best
Thanks we appreciate it, thanks for watching!
Well done indeed on a challenging piece of work.
Thank you, yes it was. Thanks for watching
Un lavoro perfetto. Bravo.
Thank you, thanks for watching!
Great job! Thanks for posting!
Thank you, thanks for watching!
Great job guys. Love seeing these old guns being brought back to life 🤙🏼
Thanks, it is very satisfying for me
Thanks for watching!
Outstanding work once again. 🍻
Thanks we always appreciate it, thanks for watching!
amazed that magazine came out as easy as it did. It looked completely rusted shut. Awesome resto. Beautiful result in the end. Came out new!
Ya me too, thanks we appreciate it! Thanks for watching
I remember when you restored my favorite Beretta 34. Also in this case, you are simply great!!!
Ya that was a fun one, thanks for the kind words and for watching!
what a beautiful piece
Yes it is, thank you. It's amazing how smart they were to keep improving the design. Thanks for watching!
Another beautiful restoration.
Many thanks!
Execelente trabajo!!🙂👍🏻
Thank you very much! Thanks for watching
Always love a Sam Colt design.
Me too, thanks for watching!
Samuel Colt died in 1862, so even though this model is carrying his name, it was not designed by him, but by John Moses Browning.
But don't get me wrong. I think that this is one of the nicest looking designs of a handgun ever made, especially in the hammerless version. Maybe only put in the shadow by the Luger 08.
@@cowboybebop3994 Damnit, that's right. I r stoopid
Amazing restoration and it works !
Thank you, absolutely! Thanks for watching
تمام👍
Thanks
Gerçekten bravo usta❤
Thank you very much!
This is a beautifully simple gun.
Absolutely, thanks for watching!
Excellent job. Very interesting Colt gun. Very cool when antique weapons return to working condition. Bravo man!
Thank you, yes it is! It's very satisfying work. Thanks for watching
Great to have you back with another fantastic restoration.
Glad be back, thanks for watching!
Хорошая работа. Спасибо за контент
Thank you, thanks for watching!
Excelent restoration men colt The best
Thank you very much! Thanks for watching
Bravo 👏, another superb restoration 👍👍💪🏼💪🏼
Thank you very much!
Outstanding camerawork! Restoration perfection.
Thank you for the kind words and for watching!
Beautiful restoration well done 👏 👍
Thank you very much!
Fantastic, beautiful 😊
Thank you, thanks for watching!
If you only manage to find a replacement barrel it should be fine like in the good old time 😉
Ya I can find one for sure, thanks for watching
Another Great restoration job well done.
Thank you very much!
Hot booling looks gun clean and accurate well done
Yes it does, thanks!
Excellent job!
Thanks
Amazing as usual!!!!!!!!!!!!!!!!!!!
Thanks again!
🙋 Congratulations on adding to the collection, great model. Soon you will collect all the early automatic Colts.👍👏💪
Thanks, ya that's the goal! Thanks for watching
Nice job! Beautiful gun!!
Thanks, thank you for watching
Klasse Job echt Gut 👍👍👍
Thank you very much we appreciate it!
Another great job, love the way you guys film these vids, very satisfying!
Thanks William, thanks for the kind words! Glad you like them
Nice
Thanks
Great work
Thanks!
Greetings from Italy guys. I love your restorations.
Thank you very much! We appreciate you watching!
Excellent video. I always look forward to your next one.
Thanks Robert we appreciate the support. Thanks for watching!
Really nice job on that one, and you did damn good on that test fire. Imagine with a new barrel!!
Thanks, ya it would have nice. Thanks for watching!
Naysss
Thanks
Nice, was surprised you were able to hit the disc onto the Texas Star. Wow that barrel was almost slick. Good job guys.
Ya me too, thanks we appreciate it! Thanks for watching
Mais um vídeo excelente, com um trabalho de restauração magnífico! 👍🏻☺️⭐⭐⭐⭐⭐
Thanks Marcio, see you on the next one. Thanks for watching!
Awesome, as always! Funny, because I really don't like Guns. But for someone as clumsy as me, watching you work is like Magic. Really cool! 👍
Thank you very much for the kind words we appreciate it, thanks for watching!
You´re an artist ! It is incredible what you did´t with "precious scrap".
big fan and Greets from Germany
Thank you for the kind words, we appreciate your support!
@@TheKinzlerBros Do you have any news group to point question? For example size of glass bead you use. best regards
Awesome video!!
Thanks!
You're amazing!
Thanks we appreciate it!
Damn good work! 👍🏻👍🏻
Thank you, thanks for watching!
Love your guys videos!
That was a really good video! What a cool restoration.
Glad you enjoyed it! We really appreciate your kind words and support! Thanks for watching
Very fine work as usual Kinzleri! It looked like there was a quarter-cocked safety function on this fine piece when you worked the hammer during reassembly...yes? Or was it just me?
Carry on the awesome!
Thanks we appreciate it, ya you are correct! Thanks for watching!
Very interresting old gun. Your gunsmith job is amazing. I wait about your videos every month. Thanks for this moment. A french gunner
Yes it is, thank you very much! We appreciate youf support! Thanks for watching
Perfect work, congratulations my friend. You gained a subscriber. Mother of strength too, thank you.
Thanks we appreciate the support, awesome! Thanks for watching
As always 👍🇺🇲🧨
Thanks again!
Very nice restoration on an old colt, darn gun is older than me lol.
Thank you, You would be really old if you were older than it! Thanks for watching
Hi Brandon , Another superb piece of firearm restoration , more history saved , loved the rubber glove finger clicking , you are a true master , if it was an Olympic sport , you would be a gold medalist ! Thanks for posting , always enjoyed immensely .
You are so kind sir, thanks we appreciate your support Pete!
Glad y'all are back. Been hoping nothing was wrong. I always look forward to your next video. I always learn something from each video. The videography, narration, and notes all contribute to the top quality of every video. Please keep the content coming.
Ya we wish we could put more videos out but, it takes time and we still have a full time job. Thank you we are glad to hear it. Thanks for watching we appreciate it!
Хорошая работа. Надо было боек из стали заказать.
Thanks, ya it was. It is made out of bronze. Thanks for watching
Good work
Thanks
ah ,M Browning what can you say, nice rebuild of the 38super.
Right! Thanks for watching
Didn't know there was a 1903. Really a great job. It turned out very well. Too bad about the rifling.
Ya they had a few trial and errors before they got to the 1911. Ya for sure. Thanks for watching
Great job! I'd be proud to own that old Colt. And compared to that first view of the barrel? Shot out out or not, you made it work. Some pilots in WWII would carry their own personal pistols. I can imagine some young pilot in WWI having that Colt from home with him in his jacket in case he needed to make a forced landing.
Thanks, we are! Ya it's crazy to think about what they did for this country! Thanks for watching
good to see you using multiple rods
for removing the mag so halving
the stress on the count holes
but still recommend using
bamboo chopsticks ;-)
Ya, thanks for the advice.
A really good restoration as always, really liking the way the videos are improving 👍👍👍👍👍
Thanks, we appreciate the feedback!
Спасибо за работу!
Красивый пистолет.
P.S. Бронзовый боёк - это интересно...
Your welcome, thanks for watching we appreciate it. Ya I didn't know till I had to replace this one
Great job on the restoration, pity the rifling was so far gone. 👌👌👌❤️
Thank you very much, ya for sure!
Nice looking pistol. It looks like somebody probably carried that thing every single day for a very long time. I wonder how many rounds it took to wear out the barrel like that? From the sounds of it, it seemed like the bullets were tumbling when they left the barrel at least half of the shots you fired.
Thanks, I like it too. It takes so many clips to make a bore smooth like that. Thanks for watching
After You Restored It Don't Leave It Dry Put Some Lubricant So It Won't Jam It Will Function Well.Replacement Parts Are Available
I lubricate everything it doesn't always make the video. Ya I know, thanks for watching
i have one of these mint my carry gun thanks dad
That's a nice family heirloom. Thanks for watching
I imagine one could just hand load 38 super ammo to the lower pressure of the older cartridge since they are dimensionally identical.
Yes you absolutely can do that all you need is to know the load and fps. I believe now I do not re load ammo and I’m not well versed in the procedures in re loading. But I read on a forum that you can do this yea. But .38 acp is available online. That’s where I got the cartridges to fire this colt. They are loaded to period cartridges that the firearm was designed for. But that doesn’t mean that one of these old colts can’t fail upon firing. Which is really scaring to think about if that from barrel link pin failed and the rectangle pin failed the slide could become a projectile directly at your face. Sorry for the long response. Thanks for watching
❤❤😊❤❤
Thank you!
تمام
Thanks
не знаю как вам) а по моему очень красивый пистолет) в плане инженерном, необычный он!
Ya it's a great gun, just a design flaw. Doesn't have a slide stop, so if the take pin breaks the slide will fly off!
😎😎😎💯💯
Thanks!
I love the bare metal after sandblasting..everything clean and new-looking again...and the metallic clinks as all the parts go back together.. I guess Im just weird.
Hey, you mix a new batch of blueing every episode, can't you re-use the batch, or does it go bad or something?
Ya me too but, bluing protects it from rusting. You probably could we just don't because its too long in between restorations. Thanks for watching!
Love the videos. I like the restorations but watch mostly to see how to disassemble/reassemble the guns. Thanks
Thanks we are happy to hear it, ya that is the interesting part! Thanks for watching
Очень люблю Ваши видео, хоть и не знаю английского языка. Удачи Вам и успехов!
Thanks we appreciate you, wish there was a way to convert the language! Thanks for watching
Nice restoration work again. It’s impressive the way you save these firearms. And good aim with a smooth bore pistol……lol
Thanks we appreciate the kind words, ya it wasn't too bad. Thanks for watching
Excellent restoration/conservation work (as always).
You never disappoint with your professionalism, and attention to detail.
Now that your including the voiceover with the vids, is also a great idea.
Thank you for the kind words we appreciate it, glad you like them. Thanks for watching
This is such a cool channel. Digging the voice over. Not overdone, concise and on point.
Thank you very much we appreciate the feedback. Thanks for the kind words and for watching!
Unless that gun was a range gun at a shooting club or some such I find it hard to believe that one shooter actually put that much lead down one barrel. That isn't a hot round. Even if you had new rifling cut the bore might be to large. At ten feet or so it might still hit.
It must have been for the rifling to be gone, thanks for watching!
👍
Thanks
Cool video. Use a brass punch to avoid damaging the metal.
Thanks, they are they are just coated. Thanks for watching
How were those rounds in such good shape? I mean come on! They weren't even tarnished!🤨
I don't know what you are talking about, I still wasn't going to use them. Thanks for watching
@TheKinzlerBros ..LMAO...OK pal. Whatever you say...🙄
Great video thank you
Glad you enjoyed it, thanks for watching!
Great job on the restoration, it really came out nicely! I also enjoy your commentary, it really adds to the video. Keep up the good work!
Thank you we appreciate it, thanks for the feedback. Will do, thanks for watching!
Amazing handgun restoration technology. It's a Colt handgun, after all.
By the way, are you a gunsmith?
Thank you very much we appreciate it, not a certified gunsmith. Thanks for watching
A great job saving a fine old firearm. Did you glass bead the inside of the magazine too ?
Thank you, yes I did. Thanks for watching!
Nice restoration. It really needs a new barrel though.
Thanks, yes it does. Thanks for watching