Video není dostupné.
Omlouváme se.
Hooking up Car android stereo and blue tooth has no sound (fixed it.)
Vložit
- čas přidán 16. 08. 2024
- This is how i fixed the sound in a tahoe with the bose system radio sound worked but the blue tooth or videos wouldn't work.
I went back through and hooked it up to my acc wire because if I had the radio channel on. it wouldn't shut off when car shutoff. Since then never had a problem with it.
Thanks because I connected the yellow to the blue wire and it killed my battery smh
u should go to engineering debugging settings in factory settings
Helmand Khan engineering bebugging asks for a code. Code 8888 doesn’t work for that.
How do you adjust the sound it has no fade or bass
My android is plug and play for 2008 Mazda 3. Everything works but I get no sound at all. I don’t see any cable to attach for amp.
Yes Thank YOU!!! I had no sound at all from my speakers. For these cheap Chinese Android radios, all I did was connect...
BLUE "Antenna" wire to RED "Accessory" wire.
RED wire only has power when the key is turned ON.
YELLOW wire has power to it constantly. DO NOT connect the blue 'Ant' wire to the yellow wire or your radio will drain the battery.
Just make sure before you do this that your volume is at level 1 or 2. I had the "Loudness" button on and the volume at level 9, and it about blew my speakers out!!
So i just ran across this issue so the place that hooked my stereo up has my Blue ant. Wire hooked to two other blue wires. Do I also tie those other two blue wires into the acc.?
@@jordancarmona4175 NO. Just put the blue 'ANT' wire to the red wire. At least in my situation.
@@ScottYouger so i should connect the blue ANT wire to The Red power wire??...can u please explain i can't understand 😭😭😭
@@Braintechz cut the blue wire and conect that blue wire with the red wire..
you get what you paid for 😂
Brother, I swear, thank you so much for posting this video. I had some so called, “professionals” do it, but they only made sure that the radio worked and that’s it.
3/16/24 this video is well self explanatory for me jumping the blue antenna wire to acc fix the problem Thank you.😊
So I had similar problem, I was using an amplifier, I had power antenna hooked up to trigger on amp. Only worked on radio so your video helped me find that issue. I wired amp to acc and works perfectly. The other amp trigger wires don't work for some reason
Thank you for posting this fix, worked great for me! Wired it to the ACC wire.
this actually makes sense, been looking for a couple hours at explanations, just hooked up on my old X5 and its having this damn problem - THANKS
same here, you connected which wire to what ?
Thanks for the explanation, I have the similar problem, hope it works for me
Killing it, even 3 years later
Thank you bro I had the same problem and after listening to you I ran a wire from my antenna wire to my positive wire and now I got Bluetooth playing from my phone inside my truck. Thank you so much bro I truly appreciate this info
Have you had ant issue's after making the change?
This sounds good
Thank you so much for making this video. You have just saved me hours and hours of swearing. If I knew you, I would buy you a beer.
So the AMP to ACC ?
I have what looks to be almost the same unit or close in my BMW e53 and the seller got back to me about what the issue is and it is indeed this
Yeah this worked for me, glad i found this video
Thank you for this video my system finally works after Year 💪🏾
Have you had any problems after making the change?
@@fletcherb.booneiii7723 non what so ever thank you
GRACIAS AMIGO ME SALVASTE LA VIDA!! 😍😍 El señor te bendiga con una buena novia y muchos hijos!!
I got same unit it works fine radio, Bluetooth I have sound. I hooked up a PlayStation mini to the rca jacks I have the video signal I can see a picture when you click the AV app. But I get no sound. Weird thing is if I turn the radio on and power the PlayStation I can hear the PlayStation sound behind the radio. But if I go in av app nothing no sound but I do have picture.
You just saved my life thank you 👏👏👏
Been busting my ass for an hour and was getting pissed off 😂😂😂
I hooked that blue wire to the remote signal for my amp since its usually what the blue wires are for 🤦🏻♂️
Now i hooked the remote to the acc, and the blue just like this and sorted out 👏
You fix my problem 🎉🎉🎉🎉… thank you so much
a question ? look at my radio works fine but the Bluetooth does not want I have a 2007 Honda Odyssey and I bought an android 9.1 tablet but when I connect my phone it connects but it does not ring, what do I have to do to make it sound or what other things should I adapt it?
I literally just had this same issue lol. I forgot the antenna wire power is only while using radio. Was driving me crazy then I hooked the blue factory amp wire to the accessory wire and boom all good.
Thanks it workef
The antena wire goes in ACC ?
Great and enlightening video. I have the same unit in my BMW and slightly the same problem.
However,, when I start the unit Bluetooth usb and everything works, but when I switch to radio then only that works and the rest have no sound. Could the issue be the same? Plus canbus refuses to work no matter what. Appreciate any help
Thanks for this my car Bluetooth wasn’t working so the small black antenna wire on back of radio jus connect that to constant power? I got same radio
Very helpful. Thank you
Can you help me out? I have the same type of stereo and for some reason whenever we connect our bluetooth the sound cuts off randomly and we want to know how to fix it
There could be many reasons for that Bluetooth isn't the best way to transfer music if your device is too far away or if there's some other thing that causes interference. If your phone is bouncing around allot can affect it. Or if you're radio is moving around and not secure because brackets broke all these things could be cause of Bluetooth interference. Maybe try moving device closer and not using it while transferring music if that doesn't work take the stereo out if I remember right there might be a Bluetooth antenna on the back try repositioning it away from any metal.
Thank you so much fixed my problem!
God bless you, you're both angels
Serious question, did this happen after using the radio for a while or was this a brand new installation?
Reason I ask is because mines started acting up in the same manner after months, I also run an amp and subs.
This is how it happened:
1. First few months the radio worked just fine, after a around 6 or 7 months it would play music just fine but then the radio began heating up really bad and then the door speakers went off and only the sub worked which of course sounds like shit cause it's just straight up bass.
2. So I tried looking into the motherboard and all of that and found that one piece looks like it had thermal paste at one point and it's melting off slowly, not sure if I should replace the thermal paste and re-apply it but looking to see if your method here helps... Which is why I had asked if it's a fresh install or happened later on after installation.
This was a new install, yours sounds like your speakers are using more power then the stereo could produce but if there hooked to your amp then you should be fine. So I'm not sure what's going on without looking at your setup.
Did you figure out your issue? Same exact thing is happening to me right noe
Wait I don’t understand. For mine I have the white and red plugs hooked into the Aux L and Aux R. Everything works wirh the aux but on Bluetooth it doesn’t work.
Amp trigger is probably wired to power ant. So only triggers amp on during that time. Wire it to acc on. Was my problem but this video helped me figure out the issue. Not sure why he had to do this unless he had an amp
What instructions did you follow for the wiring? My instructions were nonexistent
Having the same issue rn with my alpine ilxw650e. FM works but everything else has no sound. ill try this as soon as I can
Very good video thanks for sharing this info
Hey man thanks for the video it solved my problem
Do you know where to find the Radio apk for this model? I can't open the Radio application and its frustrating. I want to uninstall and then install it back but i dont know where to find the apk file for Radio
FINALLY GOT IT !!!! Thank youuuuuu
hey dude, I have same cheap android unit and I have no sound at all sometimes, after restarting car multiple times I get sound if I get lucky, any suggestions, thanks
this is what im trying to figure out? have u had any good luck?
I connected radio to acc. Did someone had any problems with the battery after that?
Thanks for the video it worked..💨
Mine has sound but the subwoofer doesn’t work when I switch to Bluetooth. It only works with radio. I can’t find any subwoofer settings
Man i hope this works lol i have 2 one on my jeep and that works perfectly fine but on my yukon i have this problem gonna try this out
Just hooked mine up and i fint have any sound not on radio mode nor bluetooth and the bluetooh from my phone when i play music i pauses by its on
Did you fix this???
What was it?
I have the same issue
Hello how did you fix this. Please answer.
I had mines for a while and after an update I'm suspecting I have the same issue lol but judging from your comments I thought it was just mines now I'm sure it's software and I'll downgrade it and update you guys
That help me out 💯%, thanks!
Please help..same radio I hooked it up but the radio plays then goes static and changes chanels??
Hello I have the same radio but doesn’t give me sound when I put the Bluetooth or usb only working and give me sound with the channels of the radio what I can do to fix that problem let me know ASAP please
Hook up acc wire to the blue ant wire should work
@@jasproduction44 thanks it work connecting the acc wire to the ant wire but now when I turn my car off the radio doesn’t turn off stays on
check and make sure you hooked it up to acc wire and not the constant hot wire. Sometimes the acc wire stays on until you open the door. You might just have to play around with it and see if you can figure out why it's not turning off. Usually the red and yellow is the 2 wires one is constant and the other is acc.
Thank you so much it works!!!!
Thank you soo very much that did it
It works !!
Thank you so much been trying to figure it out for hours,
Connection ACC-to-ANTPOWER, if your looking at a diagram
so slice the ACC wire and connect the "solo hanging" ANT wire to it?
My head unit is on 30(max) and on its loudest on phone when using Bluetooth but sound is still soft, any help?
Does the unit draw constant power after you made the switch? Can it drain the battery?
hi, a question, can you open the bluetooth app and change the default device pin from 0000 to 1234? greetings friend.
Do you know how to connect a SHA16/23? I can't get mines to work. I have a 2008 Cadillac STS. Please help. 🙏🏽🙏🏽🙏🏽🙏🏽
have u found a solution
I have 04 silverado with the Bose system same aftermarket stereo bluetooth works when I turn the key to make the radio come on but when I start my truck I get no sound bt connected says my music is playing but no sound will this solve the problem ?
Yeah you'll have to try it. Sounds like same system as the Tahoe.
Do u know why my subs don't play w Bluetooth on? Thx
I just installed my android radio and have no audio on radio, CZcams and Bluetooth. It's driving me nuts.
hey have you found a fix yet?
We are on the same boat. I am trying everything. I blew a fuse at this point lol.
@@bouli1171 have you? I am trying to figure it out for my 09 altima.
JayBurger McFries anything?
Me too . Jeep wrangler... nothing... not even radio
I will try this tomorrow!
Thanks for the video
I'm trying to put this in my 2008 honda si?
Did you have to bypass the amplifier mine is extremely loud even on low volume
Yeah I had same problem you can try going into car settings then into factory settings my code was 8888 if your is built by same manufacture that's the code if not check manual. Then go into power amp settings or something like that and turn it down to where you want it. If your stereo isn't same manufacture it's gonna be close or similar to those instructions might have to screw around in factory settings to find it.
@@jasproduction44 I am having the loud issue also. I bought another radio thinking its the radio but I'm having the same issue. I did the factory setting but that didn't work. Were you able to fix your volume issue?
Were you able to adjust the volume?
Yeah I fixed it going through the factory settings and it's set at 100 I just turned it down until I found a good volume.
@@jasproduction44 what exactly did you do to get to that setting to turn that volume down?
What I did after that was use the app of Bluetooth in stereo and then put play and works
Can you make the video more clear
My Bluetooth only sounds when on radio when on Bluetooth won't make noise samee reason?
Power to the wire going to the antenna? Or the one going to the radio?
@owo グーチmoshi I only have a power amp wire where do I plug that in I have this problem 328i bmw
@owo グーチmoshi I tried plugging it in to the acc and 12v constant do I connect it to the blue wire on my aftermarket radio harness that connects to my factory harness
@@matthewflores543 did u solve this issue I have a bmw with same problem
Thanks your the best bro
I got this same model and it’s kind of a turd honestly. I got my subs all wired in correctly they worked fine on both radio and Bluetooth. Now they don’t work on Bluetooth and only on the radio. Any suggestions?
I had to wire my amp to acc on . The amp and power ant output sucks on these
Thank you very much. cheers
Fuck broooo, thanks a Lotttttt , blessssss youuu sir!!!?????🙏🙏🙏🙏🙏🙏🙏🙏RESPECT!!!!!!
Same Android Bluetooth voice not clear other side what happened?
Say you swear, ima try this, its been ove 4 years
Will this work on mine?? My bluetooth or CZcams won't work but radio will. Stressin tf out on it thank you
Yeah give it a try it should work I was there with that same problem. Took a while to figure it out so I know how you feel.
Hi. I need your help. I'm from Poland and I don't understand much from the movie. My problem is that I have no sound when I play music via bluetooth, pendrive or from radio memory. When I turn on the radio application, the sound works.
I have a system bose in my car, the radio system is the same as you.
I noticed that the original amplifier in the trunk only gets electricity when the radio application is on, .When the music is playing from the pendrive the amplifier has no power on the speaker cables and the speakers are not playing.
The blue cable behind the radio powering the antenna has no electricity either.
Do i Need to change something in factory settings? Please help me.
Yeah hook up the blue antenna wire with your acc wire it will kick your amplifier on.
I will try it tomorrow. Really thank you for fast answer bro!
Btw, when i connect usb wire and then pendrive put in, my radio doesnt react, literally nothing. Have I to turn on something in factory settings?
If your amp is kicking on when radio is on then your at where everyone else gets stuck but once you connect the blue wire, your golden.
@jasproduction44 I connected the blue wire to the yellow one. Now the speakers are working but first I have to turn on the radio application and turn it off and then there is sound from bluetooth and others. Maybe connect the blue wire to the red wire under constant current?
I have the same radio do you know a fix for the volume it is too high even on 1 can’t seem to balance it out
Yeah I had same problem you can try going into car settings then into factory settings my code was 8888 if your is built by same manufacture that's the code if not check manual. Then go into power amp settings or something like that and turn it down to where you want it. If your stereo isn't same manufacture it's gonna be close or similar to those instructions might have to screw around in factory settings to find it.
I have same radio same problem. Where should I hook my amp remote out to then?
You should have two wires on your radio that are blue one for power antenna and one blue one for power remote the power antenna turns in in tanneron electric in the vehicle if there is one and the other blue wire is your remote to your a m p
I tried a few but eventually had to wire to acc on. Power ant only triggers for radio and the rest of those didn't trigger my amp
You’re the best
Thank you so much !!!!!!!!!!!!
Thanks alot buddy
How can I hook rca cable up to this
Life saver
My radio stayed on while my truck was off using Acc
Could you fix it?
Hi I have this same radio. I've never used the blue tooth so no idea about that but! When I have the satnav on and the speech direction (or beeps) starts it cuts out the radio or media player sound. Now I know they do this as standard but normally it should only cut the sound for the announcement and then resume the audio from the radio ect. Mine cuts all sounds except the sat nav. To resume radio/media sounds I have to exit the satnav program. I've looked in setting and can find nothing? I wonder if this is a related problem? Thank you
I’m getting sound only from the driver front and rear no passenger front or rear speakers
U might have to go to your eq and set it
Thank you❤
i have same radio. screen won’t turn on . any help??
I have a 2003 Cadillac deville and what I did was got a wire hooked it up to the ignition fuse to the red wire in the stereo harness and the reason why the ignition fuse is for when the car is on and off
I have exact same unit and same problem
It’s saying I have to enter a pin to connect to Bluetooth and there is no pin
0000
Any idea on how to customize the home screen and get rid of the widgets?
i tried didn not work bluetooth still have issue
The radio and phone calls work on Bluetooth but not my Spotify or any music. Wtf
Same
yo bro did u fix that problem? i have the same issue
@@detijuana9991yo bro did you fix that problem?
@@MarkBautista-oc2yd yes so what is did was let the battery drain then removed recharged it and when it put it back in everything was working fine again
@@detijuana9991 do you have the same product from the video?
Model?
Didn't work for my 2011 camry
@jasproduction44
Dammit I just bought one of these and having same issue. I spliced into the acc and it seemed to work fine when I did it yesterday. Everything was functioning but today when I turned off the car(and I tried this multiple times) my radio wouldn’t turn off so it was still getting power somehow. Strange because when I tested the acc wire with key off it didn’t have power and neither did the stereo wire. Somehow between last night and today it has power when ignition is off and the stereo will just run till battery dies or something else. I tried this multiple times and different ways. Anyone have any helpful advice on this as im ready to just return this thing and go buy some name brand stuff. I’d rather not as it’s much more expensive. Thanks in advance to anyone with help.
Here's a couple things that pop to mind your key ignition is broken and your not turning the car all the way off. (Rare situation but does happen) or the acc wire is somehow a constant and hooked to a relay so looked like it shut off for a second then turned back on. Either way highly unlikely might have to start over and look for a new acc wire or create one.
Danke
My Bluetooth work perfectly almost but my radio doesn't search for stations...
If it's not searching you'll have to manually put radio stations in if it's not receiving the stations then your antenna needs replaced or possibly your antenna came disconnected. I'm not sure without looking at it.
Hey my Bluetooth keep cut off
Am not gettin no sound to my radio either
You probably need an interface module. Most newer cars have to pass through the bcm that’s why your original radio works.
♥jasproduction44
witch devicec did you connect?
Thx bro
Im going to kiss you dude!!!!!!!
Blue connected to the yellow wire ?
No connect it to acc wire I think it's red. I think the yellow is the constant wire it will drain your battery.
@@jasproduction44 the radio is on while the car is still off it's not red
Not sure my car the red wire was the acc after you turned the car off did you open the door sometimes the acc wire stays on until the door opens. May have to put a wire tester on it to find out which one is the acc wire.
@@jasproduction44 the doors where locked I changed the wires and left the car locked but when I was at home looking at the car I saw the radio still on so I rushed down to remove the red and blue wires and the battery died so I took out the radio
Mine not making any audio at all
una mierda me quemo la pantalla . no hagan esto