How to Replace Exterior Door Handle - Chevy Silverado, Chevy/GMC Trucks 1999-2006
Vložit
- čas přidán 19. 07. 2020
- In todays video I would like to show you guys how I replaced the exterior door handle on my 2004 Chevy 2500 but the procedure is the same from 1998-2006 chevy trucks like Tahoe, Suburban, Avalanche and even the Cadillac Escalade.
My affiliated link toAmazon
amzn.to/3j39OqM
Check out the NEW MERCH!!
IF YOU HAVE ANY QUESTIONS JUST ASK!
** If the video was helpful, remember to give it a "thumbs up" and subscribe. **
----------------------------------------------------------------------------------------------------------------------------------------
IF you would like to leave a donation, here is my link anything helps
www.paypal.com/cgi-bin/webscr...
My Spanish Garage Channel
/ @tallerautomotrizfalcon
Follow me on INSTAGRAM
/ falcons_garage
Twitter.
/ falcons_shop
Garage's Facebook
/ falcons-performance-an...
Facebooks Hobbies
/ falconshobbies
My Gaming Channel.
/ @falconsgaming
Disclaimer:
Due to factors beyond the control of Falcons Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Falcons Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in my video. Use this information at your own risk. Falcons Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Falcons Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Falcons Garage - Auta a dopravní prostředky
Thanks bro. The shop wanted to charge me $150 plus tax to do this. I paid $16 for the door handle and did the work myself for $free.99. Life saver.
I love how it showed everything except for getting out that last bolt!
Dam, I just watched another video where he completely dismantled the window rails and glass just to get to the bolts....I'm trying your method!
Glad I could help
i know im randomly asking but does anybody know of a tool to log back into an Instagram account..?
I stupidly lost my password. I would appreciate any tricks you can offer me
@Otis Aldo Thanks for your reply. I got to the site on google and im trying it out atm.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
@Otis Aldo it did the trick and I actually got access to my account again. Im so happy:D
Thank you so much you saved my account !
@Carson Max you are welcome xD
To anybody who has a 99-02, you also have to remove the window lock/up and down panel, (it just pops right up and off) to get at another bolt that holds the door on, figured it out after a few frustrating minutes of trying to pull the door panel off
life saver
Thanks man I just broke my handle an hour ago. Definitely a lot easier than I thought. I was worried about the lock mechanism but you showed everything in depth. Worth a sub ❤️
Glad I could help
Mine broke this morning. Glad these people post such great videos.
Mine broke this morning feels like -29 and it came flying off. Thanks ! Worth a sub
Same!😂
Thank you!
Details from my job:
My panel screws were 7mm, and the handle screws were 10mm.
I had to put the 10mm socket in vise grips to get that last handle screw.
Glad this video is still up. I'm not Mr. mechanic so I've been putting off replacing the drivers door handle. Yesterday the passenger broke too on my '04 GMC Sierra. Got to do both post haste. THANKS!
Good luck!
Me 2
Exceptional job of hiding every detail in the process
Thanks for the video dude… I have an old 2001 GMC Sierra I use for a hunting truck and broke the handle last fall. It’s been very frustrating as it was the drivers side… always had to crawl across seat from passenger side. I ordered a handle off Amazon for $18 and it got here last night. I just installed the new one with no frustration. I would have been able to figure it out but you made it simple.. replaced it quick and easy. Took minutes.
So keep this video up. It still helps people. Thanks again!
Lol 😆 I'm having the same issue right now, I can only open the door from the passenger side & have to reach over to manually open the driver side lock. 🙄👎🏼
Hello fellow crawlers im here to replace as well
Thank you for helping me to do my Avalanche myself and save myself some money for my family. You are appreciated sir.
Right on holmes. Dope vid. Broke my handle at work so this was quick and helpful , beats going to a mechanic 🙏🏽
This worked. Thanks. For anyone else about to try this, go ahead and pick up DORMAN part 75450 because you may break those plastic clips, and you'll need fresh ones.
Thanks for making the video short and sweet bro! Just replaced my door handle in 20 minutes
Glad it helped
Brother, i have an 07 classic k 1500.
Had to pull out the window and all trim and mirror. It worked but yours was waaaay more simple.
Simple, quick, efficient everything I love about a good how to video
Glad you liked it!
By watching this video I replaced my broken door handle and the steps he showed are easy to follow and bingo
Fixed:)
Glad I could help!
Thanks for the helpful video and information. I have this same problem with my truck. After watching your video i feel comfortable with replacing it. 👍🏼👍🏼
Glad it helped
Very helpful, thank you. My 06 2500HD had one more bolt holding the panel on in the lower right corner. I also had to pull a hand crank (there is a small wire retaining clip that you can pull with a small pick). The nuts for the door handle are 10mm. Hope that helps someone.
Thanks man I just did the same thing on my dad's 2005 2500 and your video really helped a lot
Thanks man .
My drivers side door's been frozen shut morecthan once on my 02.
Gotta say it's the first replacement.
Great instructions sir.
Glad it helped
This also worked awesome with my 01 Tahoe, thanks for making this video. And also for listing the socket size
I just replaced mine out of 02 1/2 ton single cab, it took roughly an hour and a half, including going to the part store, the only problem I have was the nut on the bottom, the inside door handle bar was in the way , and my fat arms didn’t help much , but all in all the video was very helpful, keep making helpful bedios
Glad I could help!
Thank you brother. In all of the 36 years I’ve had a driver license I’ve never broken one of those…… until tonight. My first car was a 1973 Z-28 LT-1 and I fell in love with Chevy. It had steel door handles. The plastic ones just like this are GARBAGE. I simply opened my door and it broke the oval part all the way from top to bottom plus snapped off plastic where the bolts go. The entire assembly is SUPER BRITTLE like it’s been cooked too long or something lol. Anyway I appreciate your easy to follow, quick instructions which were easy to follow. Thanks again brother 🤙
Simple , smooth , quick to the point. Brilliant!! Thank you sir
Thanks for this video, went to a nearby tireshop on a friends recommendation to replace the front tires since there was some gouging in them and the guys at the shop broke my handle, was worried about it being an expensive fix, but this laid it out in a easy to follow guide!
Glad I could help!
They didn't fix it? They broke it right?
Thank you for the video, short and to the point, worked as advertised, good deal!
Best channel in in CZcams for fast repairs 💪 saved me money and time THANKS amigo your the best!!!!
Glad to help
Great video simple and straight to the point, help me a lot with my door
Thanks! You helped fix my AC yesterday, now the door handle today!
Glad to help
good luck on the projects
Gracias my friend! I just watched a video - but it's the older style truck interior - and he had to grind fkn rivets that hold the window regulator and on and on... I was getting bummed out. But - from your demo - same as my truck interior - it's a piece of cake. May good fortune rain down upon you ))
Glad I could help
Thanks man, wasn't sure how to go about that inside one. You're the man!
Thank you, this video is really helpful I was stuck for a minute but I got it now 👍
Great to hear!
Thanks Bro, I will need to do that very soon and I was worried but you made it simple.
what's up Chuck honestly it’s very easy to do. You should have no issues.
Great video...thank you much..gonna change my door handles this weekend
Thanks man. Mine just broke this morning. I'mma use this video on my phone when I do mine.
thanks for the video, some scumbags just tried to break into my truck, thankfully the handle broke and i ran outside just in time.
Glad it helped
Just did mine today works great thanks so much for this right to the fix video.
This is super helpful and fast way to replace the handles. Thanks for sharing
Thanks for listing the socket sizes great video I just changed the handle
Glad it helped
Love finding videos before I have to do something. Thanks for taking out the guess work
Good luck!
Thanks for this. Ripped the handle off my 2002 Silverado Friday when it was frozen shut. Went to AutoZone and picked one up for $35 and followed these steps. Back in business! Everything worked great and it wasn’t difficult at all. Just reaching that third bolt in the handle, but the ratchet without an extension fits.
Thanks for this video!
I subbed. You just saved me a whole bunch of hell and headache.
I still have to change mine.
This was perfect.
Thanks for the sub!
Thanks for the video, excellent job explaining things. Very helpful!
Short, informative, and wise, the perfect tutorial
Much appreciated!
Great video followed ot to the T. Issue resolved. One note: that third nut easier is easier using a 10mm box end wrench.
Thanks for sharing
Thank you so much for posting. It went smoothly!
Great advice did it successfully after buying a ratchet that fit for the nut on the inside the one I had didn’t fit lol
Thanks so much my husband now know how to fix the truck handle.
Very helpful. Simple and easy to follow.
Thank you very much for your time.
Glad it was helpful!
Having trouble finding that 3rd 10mm bolt any tips?
Glad i watched this before going at it. Gotta grab a thin extension for my ratchet lol
Good video buddy! Kept it simple and informative.
Appreciate it!
Thanks that was great , just broke mine last night you made it look simple....
Glad it helped
Thanks for the video, very helpful!
Hey man the car door keyhole is messed up on my truck I can’t even get the door to open because some guy tried to break in my truck how do I get the door to open I have a 2005 Chevy Silverado
Thanks it was so easy!
No more zip tie door handle for me =]
Glad it helped!
Great video man I might need this here in a few days :)
Thanks bro! I need to replace the door handle on my 04 tahoe.
Thanks man, got it swapped no problem👍
Thx alot man just replaced it! Thx for the info!
Glad I could help
Broke my handle a week ago. Not that hard to replace it. Thanks!!
Thank you so much. Excellent video!
Did my first one the other day. Pretty simple.
What about theboassenege side is it the same process cause mine is yanked off the bolts
Big thank you. I have been duct taping mine on.
Thank you for this!
Ve r y, very helpful.
Thank you for this, I was about to pull my grinder out and start cutting shit, bro.
Nice job!
Also, just picked up the very same handle at Autozone for 22.90something.
Not too bad, I guess.
Thanks again, bro.
You got a new subscriber.
Respect.
Thanks
Great video, really helped out. Worth a sub 🙌🏾
Thanks for the sub!
Dude I love your video thanks for getting to the point
Glad it helped
Good Video Falcon, nice and quick!
Thanks!
Now I gotta fix my sons key hole he wedged something trying to unlock the door when he left keys inside absolute genius I tell you smh Lol
Never taught him how keys and locks work did ya? Lol
Thanks man. My big hands made that 3rd bolt harder than you made it look but I got it. Only bleeding a little😂
Thanks for the help. Quick and simple....
Glad it helped
Dude, SO helpful. Thank you lots!!!
Glad it helped!
Both handles are broken off my 06 GMC, thanks for the video.
Glad it helped
Very well describe for this new sub! Thank you.
Awesome, thank you!
How do I get the clip back into place putting the lock into the new handle i’ve been trying for an hour 😭
Appreciate primo. I couldn’t do with out you
You are the Man! Thank you!
Glad it helped!
Thanks, mang!
Hi bud, How long would you say this should take? We got off and on rainy weather here lol
Sweet man I am doing this today thanks for your video and instructions 😊
Good luck with the project
@@FalconsGarage thanks man to u I can do this got old fast climbing over the seat in a bigger trick to get in lol 😆
@@FalconsGarage truck
Thanks dude, great diy video
Any time!
Very helpful thank sir
Thanks great video
Thank you. Very helpful. Keep up the good work. God bless you.
Glad it was helpful!
Hey man, thank you! Great video! 👍
Glad you liked it!
What about the chrome sleeve around the door locke gets stuck do you need it.. like a bezel..
the sleeve is not a stock item .. so you dont need it
Thanx for the video helped me alot
Glad to hear that
Thank you, sir. Thank you very much.
Very helpful. Thank you.
Glad it was helpful!
easy peasy - thank you!
Glad it helped!
Think you so much for making this video I have my back passenger door handle broke so no I know how to replace it
Your welcome!
my new hummer H2 is missing both driver side door handles, should I get a junk yard driver handle so I can have a lock? or can I buy the lock new?
I would recommend new
Easy Breezy. Thanks 👍🏽
3:53 do you know where I can buy that metal lever that’s on that lock? I need one for the passenger side. Thanks
best place will be the junk yard ...
Great video bro
Glad you enjoyed
thanks this video helped alot
Glad it helped
Thank you!
thanks, really helpful for me.
Glad it helped!