Nice have stress relief. I enjoyed when friend had his machine shop. Lose track of time. He kick me out to go home get some rest. He had sell/ retire he couldn't lift stuff hardly any more. Hoping when get set up do saws get that feeling back again.
I agree with your blowdown numbers 100% Harvey. More degrees of blowdown not only gives the exhaust time to get out of the cylinder, it allows the crankcase charge to build up a little more before the transfers open. The. You get that little bit more of a push from the crankcase. That 2100 is going to pull like crazy. Can’t wait to here how it sounds. That Mac you’re working on won’t sound like a Mac with all those stihl parts in it!
Ive been watching Buckin for awhile, had no idea you,Buckin,tinman were all friends, you guys are killin it with it all, ive order from all your good guys, i just restored a Husky 66 from Yugoslavia with all new seals , meteor piston and polished the chrome bore, learning alot from you all, im a 2 stroke lover , unfortunately not a husky guy im trying though, there is just something about german quality from the past! Keep it up guys, thanks again
BARB YOU LOOK VERY GOOD!! So glad your doing better. Harvey it’s so refreshing seeing your eyes light up and twinkle when barb walked in. So awesome. And I’m very excited to follow you on this new build. Some jack off stole my almost new 565 with a brand new 32 inch bar on it right outa the back of my truck. So I’m going to try to save up enough to buy a new 572 from Donnie walker and have him “walkerize” it right their and then I’ll only have to pay for shipping one way. Anyways take care bud and as always WORK SAFE 😎😎🇺🇸🇺🇸
Glad she's doing better. My 2100 had a different piston and I trimmed the bottom skirt area down so air fuel could go up beside the piston instead of all of it going through the piston. That REALLY woke the saw up. I hope I didn't screw up though after hearing you say that's where they break.
When I was 12yrs old, I inherited a box of old old old chainsaw parts. I spent the next week putting parts together where I thought they went. When I finished, I had built two complete Husqvarna 2100’s! Now 30yrs later, I still use them to this day! My only problem is parts and repair, I’ve been robbing parts from the second power head. I’d love to know more about working on it and a source of parts/upgrades! I’d love a wrap around handle for my 2100 and my 395! Excellent video as always sir! Keep em comin!
Hello!I have find á Brand new 2100xp original from 1985 new. The man say was is grandfather and only cut one Big eucaliptus and was stored.Need to pay 220usd.Have a 24” and a new 34”.Is clean like new now😂
There is now an AM top end available for the 2100. In addition, one builder put a 2100 crank in a 395 along with a big-bore kit and built a bigger displacement 395.
I feel Higgins from Magnum PI. Hear I am sitting buy the wood stove burning black cherry in NH rain and snow till Saturday morning. As you could see the cold has returned like a heard of wilder beast. As you could see from the huff print in the middle of my fore head.
Sure was nice to see your wife Barb on her feet Harvey. I had to laugh when you mentioned the intake numbers on the 2100. I am playing with an old style 61 cylinder and cut the ports first. Then decided to bump up the compression by cutting down the squish area and the base on the lathe. Should have done that first. Now my compression and squish is limited to my intake timing. My amateur tip of the day, do your intake timing last. And I absolutely love your little cat buddy. He sure likes you!
Good to see ya Barb! Glad to hear your feeling a bit better. Praying that you’ll mend quickly. Harvey, what you can figure out to do to a saw never ceases to amaze me. Take care.
Don't do drugs kids!! I sold a running 2100 for 350$ when I needed money years ago. I'm good now but boy, would have been nice to sober up to a husky 2100. The saw used to jump when it fired if you set it down. Almost forgot about that till I saw this video. That saw will be amazing to run, and make any seasoned cutter go 😳😀😀😀
From the little I know those numbers are nuts, at least you know what your doing. The transfers look nice. Good to see Barb, prayers for her and her daughter, and your whole family. Cheers from Tassie.
Hi Barb 👋What a beautiful little lady she is. Many blessings in health to you both. Thank you for for sharing the Ironhorse family with us.. Much love from your Canadian friends ❤️
I've got my dad's 2100 husky I wood love to get going need some small parts.glad to see you working on one. I've got 2-372xp----2 .395xp 2--- 288 xp. 1---2100 . Like to ask you about the 2100
G'day mate. Haven't been on here in a while. Sending my regards to you and your family in these tough times. Stay strong and great job with all your doing! Much love and kindness from Australia 🌲
Hey Barb it was nice to see you . And laughing to ! I'm glad your feeling better !!! Have some hugs for you. Harvey its never boring. Always interesting. Since I stopped eating tomatoes and potatoes my arthritis is not nearly as bad. And I'm still losing some weight to .!!! I have a question?? I have a iteck Briggs and Stratton!! I pulled the heads and faced the valve's and done the seats and of course new head gaskets and adjusted the valve's because it was blowing oil !! It is still blowing some oil but it's coming from the PCV!! That can cause oil blowing right! It runs very good... Am I right in my thinking is the question???? 😊👍👍👍🌎🌞
1 more thing not to be a bother, but if you have time I put up a video last week. Black top 61 with a 50mm husqvarna 66 cylinder that I ported. I was pretty happy with the out come
God bless you both. Great to see Barb today. You, Tinman, and Buckin gave me the saw bug. I had 1 Husky 257 since new in 1997. Within the last month I've acquired 2 more old ones. A Homelite 150 automatic blue, and Poulan 2000 in craftsman cloths. Tomorrow, I have another Husky coming but don't know what and a Poulan that I don't know what it is. So yeah, so far 100% success in getting them running and in the wood. I found the 2 in an old car full of scrap in a junkyard for FREE. The 2 tomorrow is going to cost me an hours with of metal lathe work. Thanks for what you do. Take care pal.
Feel better soon Barb. Iron horse thank you for that great video. Love learning. And you're right, that 266 tinman is doing is going to be sweet! Have a great day everyone
Hey guys I really hope this doesn't offend anyone, but I'm trying to get @kiwi lad some more subscribers so he can do live builds, he is a great stihl saw builder, has great super helpful videos. Between ironhorse, tinman, and kiwi lad I've gotten tons of help. He has a great series on ms460 complete build. Ok, thanks guys!!! Hope your all happy and healthy!!!
Barb, may God Bless and Protect you and your wonderful Family. You are in our prayers. Remember, you are Blessed and Highly Favored. We Love you and your Family. So good to see you Ironhorse.
It's so wonderful to see Barb again!!! Barb, glad to hear you're doing better. Keep getting better till you're 100% again. Harv, also glad to see your apprentice "Shadow" back for another video. He's just so cute! I'd bet with those thumbs, Shadow could assemble a saw. :-)
Hi Harvey!!😀😀 Glad to see Barb is feeling better!! I know what you mean about uncle Arthur bothering with the cold damp weather. Take care my friends!!😀😀❤❤ Logger Al
Hope you are doing well, bro. I just got back from the Va - they had cancelled all my medications becausee they had not gotten a lab n over a year. That’s not my fault. They are the ones scared shitless of the COVID. They had not scheduled an appointment for me and did not have the courtesy of letting me know what they are doing. When dealing with the VA it is always your fault, never theirs. However, they used me for a pincushion, today, the nurse that drew my blood had to get her certificate out of a Cracker Jacks box💕😒
That's awsome I'm building a 298 and I tried copying ur transfer port shape I know I didt get anywhere near as perfect as u but I'm learning alot from u I'm really interested on seeing how u make that x torque carb fit that might end up being a future mod for me great job and keep ur horses running buddy
Hello Harvey, always good to have the little lady drop by, feel better Barb! Harvey could you post a video of you actually porting a cylinder, with a “ black line reference “ marks where you are grinding, and a quick discussion of the tools you use? I’m just getting into working on my saws, and I have seen saws for sale at the local flea markets, that i could potentially get cheap, i would like to build not only my arsenal of saws, but my knowledge as well!
Uncle Harv I have several donor saws. Husky 61, 359, 365, 455. I plan to do my first porting job. These are all similar but do you recommend one over the others. Also should I buy a cheap aftermarket cylinder, piston kit to begin with or buy the Highway or similar and save the original?
Glad to see you getting more videos out again Harv. Still love watching all your videos. Question, are closed windows pistons better in an open transfer cylinder (66/266)compared to open window piston?
I have a 272 cylinder I'm working on 17° of transfer timing. It will end up with 22°. Could we get a 372 connecting rod and press it on to a 272 crank? Then put 372 top end on 272.
Iron Horse help! How do I get the old toggle switches off the old Husqvarna 380? The toggle unit has a brass nut which is too shallow to be used with any socket and it burrs up. On inside it’s broken and not attached to any guts. The toggle pin came out so there’s a hole now. Any ideas? Tried getting it out from inside too, but not only is the unit beveled but the magnesium housing is canted inboard so you can’t gain purchae
Hello sir hope u have a good week. I need ur help sir please! What was the non governors. oem carb that came on the 298 or 1100cd or 2100 or 2101xp????ur help would be greatly appreciated !!!!
Nice have stress relief. I enjoyed when friend had his machine shop. Lose track of time. He kick me out to go home get some rest. He had sell/ retire he couldn't lift stuff hardly any more. Hoping when get set up do saws get that feeling back again.
I agree with your blowdown numbers 100% Harvey. More degrees of blowdown not only gives the exhaust time to get out of the cylinder, it allows the crankcase charge to build up a little more before the transfers open. The. You get that little bit more of a push from the crankcase. That 2100 is going to pull like crazy. Can’t wait to here how it sounds. That Mac you’re working on won’t sound like a Mac with all those stihl parts in it!
Ive been watching Buckin for awhile, had no idea you,Buckin,tinman were all friends, you guys are killin it with it all, ive order from all your good guys, i just restored a Husky 66 from Yugoslavia with all new seals , meteor piston and polished the chrome bore, learning alot from you all, im a 2 stroke lover , unfortunately not a husky guy im trying though, there is just something about german quality from the past! Keep it up guys, thanks again
Hey Barb, Glad to see a lady smile in Ironhorses Shop 👍😊
BARB YOU LOOK VERY GOOD!! So glad your doing better. Harvey it’s so refreshing seeing your eyes light up and twinkle when barb walked in. So awesome. And I’m very excited to follow you on this new build. Some jack off stole my almost new 565 with a brand new 32 inch bar on it right outa the back of my truck. So I’m going to try to save up enough to buy a new 572 from Donnie walker and have him “walkerize” it right their and then I’ll only have to pay for shipping one way. Anyways take care bud and as always WORK SAFE 😎😎🇺🇸🇺🇸
Thanks Harvey! Prayers to you and Barb!
Love ya Barb!!! Great seeing your beautiful smile!!! 👍😁
Glad she's doing better. My 2100 had a different piston and I trimmed the bottom skirt area down so air fuel could go up beside the piston instead of all of it going through the piston. That REALLY woke the saw up. I hope I didn't screw up though after hearing you say that's where they break.
Another purrfect video, all helps to build my knowledge base, cats behaving to. Cheers from NZ
When I was 12yrs old, I inherited a box of old old old chainsaw parts. I spent the next week putting parts together where I thought they went. When I finished, I had built two complete Husqvarna 2100’s!
Now 30yrs later, I still use them to this day! My only problem is parts and repair, I’ve been robbing parts from the second power head. I’d love to know more about working on it and a source of parts/upgrades! I’d love a wrap around handle for my 2100 and my 395!
Excellent video as always sir! Keep em comin!
Hello!I have find á Brand new 2100xp original from 1985 new.
The man say was is grandfather and only cut one Big eucaliptus and was stored.Need to pay 220usd.Have a 24” and a new 34”.Is clean like new now😂
There is now an AM top end available for the 2100. In addition, one builder put a 2100 crank in a 395 along with a big-bore kit and built a bigger displacement 395.
I HOPE BARB STARTS FEELING BETTER BUDDY
I feel Higgins from Magnum PI. Hear I am sitting buy the wood stove burning black cherry in NH rain and snow till Saturday morning. As you could see the cold has returned like a heard of wilder beast. As you could see from the huff print in the middle of my fore head.
Glad to see barb make an appearance. U two take care
Sure was nice to see your wife Barb on her feet Harvey. I had to laugh when you mentioned the intake numbers on the 2100. I am playing with an old style 61 cylinder and cut the ports first. Then decided to bump up the compression by cutting down the squish area and the base on the lathe. Should have done that first. Now my compression and squish is limited to my intake timing. My amateur tip of the day, do your intake timing last. And I absolutely love your little cat buddy. He sure likes you!
If you got too much intake duration you can raise the intake floor with JB WELD epoxy.
Been waiting for the 2100! I’m happier than a tornado in a trailer park😂
"Happier than a tornado in a trailer park" hahahahahahaha i'm gonna remember that one 🤣
Good to see ya Barb! Glad to hear your feeling a bit better. Praying that you’ll mend quickly. Harvey, what you can figure out to do to a saw never ceases to amaze me. Take care.
Good day harvey.hope all is good.saw is looking good man.starting a 372xp soon cant wait.hope barb is ok.god bless your family.
Your camera looks great buddy...you didn’t even need a flashlight to check out those transfers!!!
Good To See You Harvey. I been out of the loop a bit, but always love your videos and stories.
You guys are awesome Hope you feel better soon Barb
Glad to see barb. Can’t wait to see another build go together. Stay warm brother. 🦾🪓🖤💛
Kindness and love
Hi Barb! Praying for a speedy recovery.
Don't do drugs kids!! I sold a running 2100 for 350$ when I needed money years ago. I'm good now but boy, would have been nice to sober up to a husky 2100. The saw used to jump when it fired if you set it down. Almost forgot about that till I saw this video. That saw will be amazing to run, and make any seasoned cutter go 😳😀😀😀
Great video Harvey prayers to you and Barb
Good seeing ya Harvey! You look tired brother, don’t forget to rest when you can. Best wishes to Barb, I hope she gets well very soon. 🤙
She looks like the sweetest woman. I pray she feels better and all of you the best of luck. Thanks for sharing. 🌲🇺🇸🌲
From the little I know those numbers are nuts, at least you know what your doing. The transfers look nice. Good to see Barb, prayers for her and her daughter, and your whole family. Cheers from Tassie.
Good to see Barb up and about and in good spirits. Will be following this 2100 all the way thru. Thanks
Hi Barb 👋What a beautiful little lady she is. Many blessings in health to you both. Thank you for for sharing the Ironhorse family with us.. Much love from your Canadian friends ❤️
We went backwards with weather harv , snow and rain mix,good to see barb up and about.kerp up great work.
I've got my dad's 2100 husky I wood love to get going need some small parts.glad to see you working on one. I've got 2-372xp----2 .395xp 2--- 288 xp. 1---2100 . Like to ask you about the 2100
Harvey, i like the new helper!
G'day mate. Haven't been on here in a while. Sending my regards to you and your family in these tough times. Stay strong and great job with all your doing! Much love and kindness from Australia 🌲
That cat looks pretty smart. Might try teaching him how to port.🤓 Go take care of the love. Out all of the things in life, love is what matters most.
Praying for the crew! Where are you going for the xtorq carb’s??? I love those carbs...they definitely run the 385-395 saw’s just fine...😂😂😂
Hey Barb it was nice to see you .
And laughing to ! I'm glad your feeling better !!!
Have some hugs for you.
Harvey its never boring.
Always interesting.
Since I stopped eating tomatoes and potatoes my arthritis is not nearly as bad. And I'm still losing some weight to .!!!
I have a question??
I have a iteck Briggs and Stratton!!
I pulled the heads and faced the valve's and done the seats and of course new head gaskets and adjusted the valve's because it was blowing oil !!
It is still blowing some oil but it's coming from the PCV!!
That can cause oil blowing right!
It runs very good...
Am I right in my thinking is the question???? 😊👍👍👍🌎🌞
Always great content Harvey. I love the cat. Perfect shop cat riding on your chair 🤣. Be good brother 💪
love Barb get well soon
Always learning something new with your videos Harvey! Prayers for your wife! Hope all is well wish you guys nothing but the best
1 more thing not to be a bother, but if you have time I put up a video last week. Black top 61 with a 50mm husqvarna 66 cylinder that I ported. I was pretty happy with the out come
Greetings to you and Barb from England 😊
Glad barb is doing better, your a good man iron horse. You have so much knowledge. I’m glad that you share this information with us.
Get well soon Barb
It's good to see you put the stove back where it belongs! LOL
It's good to see Barb up and around and feeling better!
God bless you both. Great to see Barb today. You, Tinman, and Buckin gave me the saw bug. I had 1 Husky 257 since new in 1997. Within the last month I've acquired 2 more old ones. A Homelite 150 automatic blue, and Poulan 2000 in craftsman cloths. Tomorrow, I have another Husky coming but don't know what and a Poulan that I don't know what it is. So yeah, so far 100% success in getting them running and in the wood. I found the 2 in an old car full of scrap in a junkyard for FREE. The 2 tomorrow is going to cost me an hours with of metal lathe work. Thanks for what you do. Take care pal.
Love ya bud, glad barb is feeling better. Thanks for the time.
Feel better soon Barb. Iron horse thank you for that great video. Love learning. And you're right, that 266 tinman is doing is going to be sweet! Have a great day everyone
Hey guys I really hope this doesn't offend anyone, but I'm trying to get @kiwi lad some more subscribers so he can do live builds, he is a great stihl saw builder, has great super helpful videos. Between ironhorse, tinman, and kiwi lad I've gotten tons of help. He has a great series on ms460 complete build. Ok, thanks guys!!! Hope your all happy and healthy!!!
Great to see you Barb. Sending all good vibes and healing to you. Be safe and be careful everyone
Barb, may God Bless and Protect you and your wonderful Family.
You are in our prayers. Remember, you are Blessed and Highly Favored.
We Love you and your Family. So good to see you Ironhorse.
Wet & damp here.arthur is loggers best friend always banged somewhere. My back been hurting for 3 weeks.I over do it...then I pay the price..
Great to see Barb at the end. Your unexpected appearance made a great video even better. Hope you feel better very soon.
50to60 degrees this week been in 70s week before here in Tennessee.
We Love you Barb, you have a good day also. Your the best:)
It's so wonderful to see Barb again!!! Barb, glad to hear you're doing better. Keep getting better till you're 100% again.
Harv, also glad to see your apprentice "Shadow" back for another video. He's just so cute! I'd bet with those thumbs, Shadow could assemble a saw. :-)
4 inch dia 20 ga stove pipe cones and stinger , airconditioner rod solder the thing together
Bless ya Barb
Hi Harvey!!😀😀
Glad to see Barb is feeling better!!
I know what you mean about uncle Arthur bothering with the cold damp weather.
Take care my friends!!😀😀❤❤
Logger Al
Her in Carline county va it was almost 80 and now its back in the middle 60 its crazy
Love the cat!!!
👍 Your a good Man!
Hope all is well with you and yours.
The new shop mascot🐱🐱🐱🐱🐱🐱🐱
Good to hear barb is doing better Harvey 💟
Hi, Barb. Hope all is good! Ken
I wish yall the beat and hope she fills better soon
Thats sweet, I have a chainsaw cat too.
A hope barb is ok ironhorse. Sending love Fae Scotland..
Oh wow honey come in hear look hos on Iron Horse. So precious.
Love to Barb, all the best from the UK
Hey ironhorse love ur videos I just watched the 2100 build u put up I just got a 298xp but I want to get some more peak out of it any suggestions
I uploaded two short vids today Friday 4/16/2021 for the first time.
I’ll check them out!
Hope you are doing well, bro. I just got back from the Va - they had cancelled all my medications becausee they had not gotten a lab n over a year. That’s not my fault. They are the ones scared shitless of the COVID. They had not scheduled an appointment for me and did not have the courtesy of letting me know what they are doing. When dealing with the VA it is always your fault, never theirs. However, they used me for a pincushion, today, the nurse that drew my blood had to get her certificate out of a Cracker Jacks box💕😒
Big cubic inches can handle big duration,you know what I'm saying lol, probably going to be a ripper😎👍
If you have too long duration on intake you can raise the floor with JB Weld epoxy.
That's awsome I'm building a 298 and I tried copying ur transfer port shape I know I didt get anywhere near as perfect as u but I'm learning alot from u I'm really interested on seeing how u make that x torque carb fit that might end up being a future mod for me great job and keep ur horses running buddy
Might want to check the ignition timing, I had to do some work to the coil to restore spark
Hi Barb! She is cute!!
hope she feels better soon. tell arthur to hit the road. he beats me up some too.
Hello Harvey, always good to have the little lady drop by, feel better Barb!
Harvey could you post a video of you actually porting a cylinder, with a “ black line reference “ marks where you are grinding, and a quick discussion of the tools you use? I’m just getting into working on my saws, and I have seen saws for sale at the local flea markets, that i could potentially get cheap, i would like to build not only my arsenal of saws, but my knowledge as well!
He pretty much did a vid like that a while back but you'll have to look for it.
Damn I wish you were my neighbor!
Glad to see the wife is doing a lot better. 🙏hopefully her problems will pass.
You may want to change your name to Iron cat. 😂
I would like to know the cost to port a 10 10 for a good work saw sir love the channel
Your new camera is definitely better, much clearer
Uncle Harv I have several donor saws. Husky 61, 359, 365, 455. I plan to do my first porting job. These are all similar but do you recommend one over the others. Also should I buy a cheap aftermarket cylinder, piston kit to begin with or buy the Highway or similar and save the original?
My prayers go out to you barb
I have one that needs freshened up
Glad to see you getting more videos out again Harv. Still love watching all your videos. Question, are closed windows pistons better in an open transfer cylinder (66/266)compared to open window piston?
I have a 272 cylinder I'm working on 17° of transfer timing. It will end up with 22°. Could we get a 372 connecting rod and press it on to a 272 crank? Then put 372 top end on 272.
Iron Horse help! How do I get the old toggle switches off the old Husqvarna 380? The toggle unit has a brass nut which is too shallow to be used with any socket and it burrs up.
On inside it’s broken and not attached to any guts. The toggle pin came out so there’s a hole now. Any ideas? Tried getting it out from inside too, but not only is the unit beveled but the magnesium housing is canted inboard so you can’t gain purchae
I hope all is going well. What type of bits do you use for port work. I have some carbide bits they just seem large for that type of work. Thanks
Take care of your wife and family and yourself everything else will come in time the saws won't go anywhere
Hello sir hope u have a good week. I need ur help sir please! What was the non governors. oem carb that came on the 298 or 1100cd or 2100 or 2101xp????ur help would be greatly appreciated !!!!
160 P.O.T. @ 14K = 19.5 in Bounce,, 13K= 22.6 Bounce, Expansion chamber
I’m working on a 2100 too. But the carburetor is shot and no good, what carburetor is that a walbro? Cause the old tillitsons are hard to find.
U ever figure out a replacement?
❤
Harvey it’s great to see your girlfriend up and about!!!
Hello, Barb!
Hey irion horse I just got a 162 se what do u suggest on a big bor kit I want to make a small ripper and figured u would b the man to ask
I’m not positive but I think the 272 top end fits!
@@theironhorse6600 thank u so mutch for ur time
👍