EASY! HOW TO COMPLETELY WIRE A PUSH BUTTON START ON YOUR OUTBOARD!! 2.0!! Quick AND extended version
Vložit
- čas přidán 24. 08. 2024
- THIS VIDEO IS FOR 900!!!
Push Button used : amzn.to/38D9vPG
COUNTDOWN TILL 1000 starts NOW!!!!
LETS TRY THIS AGAIN!! lol 2.0 on how to wire a push button start on your outboard!!
First 6 minutes is the quick and nasty!! After that those who stay WILL BE CHAMPIONS! lol JK IDC stay for the fun or be gone!! just happy to help!
install and wire a push button start from start to finish. From the button and the solenoid to the battery!
Trying out my new editing software to upload better quality videos
Using my Go Pro Hero Session
HELP ME GET TO 1000 subs!!!
Welcome back to My channel!!
I know i know!! THE QUALITY STILL SUCKS!! Im working on it! More research is coming in and i THINK i can fix it!!!
We work on boat motors, cars, trucks, and anything else i can find for CHEAP!!
Leave a comment I respond to EVERY ONE!!
If you have a suggestion for a repair on any of my current projects... let me know!! I will be performing work that you all put in the comments!! so LET THEM FLY
Also have advice on Keto, Intermittent fasting and self help topics!!
~-~~-~~~-~~-~
Please watch: "luke retest"
• 1970 Evinrude 25HP Tun...
~-~~-~~~-~~-~
Just bought a used jon boat. It came w/ a 1970 Johnson 20hp outboard. I was wondering how to rewire a electric start (it had 1 rigged already but rust/wear).
Great vid and easy to understand. Thanks
yup should be straight forward! let me know where and if you get stuck ill try to walk you through it!
Oooh bill, thank you for this!!! Subscribed
MY MAN!!
I would love the content of this video. I am looking to do this and could use the information. I just can't listen to you say but- ton one more time!
hahah yeah i might have got a little over zealous!! I still appreciate you though!
Great! Any ideas about the electric choke? I'm trying to start a Mercury without having to hook up the controls. Thanks
if the electric choke is broken.. you can install a manual one on it..or the old fashioned way just to get you running is to put your hand over the carb opening or a rage. just hole tight lol that carb will suck a towel right in!
It’s going to be fun…once the minute and twenty intro is done. This is NOT television guys! You aren’t trying to stretch to get more commercials in. Try to care about your watchers, unlike television does…which is why we came here? Right?
i agree.. but my intro is too long? I thought it was catchy and fun!! lol I appreciate the input. I actually come here for the free information... the commercials, although annoying, allow us to make a bit of money and still provide free content to help you. So i mean i get your point but a small price to pay for free information no?
Please keep watching and commenting though. I will try to check my ad options to make sure they aren't too much and overbearing!
Hey man I have the exact motor pretty much except mine is a 35 hp but I was wondering how I could put a charging system on that motor
great question. I dont know for sure but if you add a rectifier from the newer motors, you may be able to custom wire up a charging system. I think its possible but ive never seen it on these older motors
It looks great thank you for sharing my engine does not have a pull start the shifter or the controller the guy took it off the boat and he didn't give me the key and he took off the cables as well so I'm looking to see how to fix it and I think I just found it in your video thank you so much
Glad it helped!! If you have any other issues with your motor let me know if I can help!
Iglad ran into this video cause I had the same issue
I need to know how to wire a kill switch to turn the motor off. Already installed the push button but I have a 1981 mercury 50hp outboard and it doesn’t have a kill switch
i have a video on that!! Ill try to link it in a few!
czcams.com/video/D3HRGZ7Sw5M/video.html
stay tuned to the end for 2 cylinder motors!!
So I guess if I just wanted to start my motor the dirty way is ground the battery and connect the battery positive cable to the starter motor. Have an old 1978 Evinrude 115 and just want to do a compression check on motor first.
yeah! you can connect a starter button. they sell them on amazon! uses alligator clips! one to starter one to coil!!
amzn.to/3cGpcra
Do you have a video of that Evinrude with a generator? I have been told it’s wired a little different.
No video BUT i DO have that motor!! Ill see if I can play with it!! a start button should be wired the same though even with a generator
Hello sir, I have a 2019 electric start outboard motor, and all the sudden the push start doesnt work, it's quiet like battery is not connected, i have full charged battery connected though, any advice please?
2019?? its gotta be something silly like bad ground or the button got water in it!! check your wires for cracks!
Will this work on a 1998 dt140 Suzuki EFI?
yes! thanks for watching
Pretty cut n dry,but i get it,what if you want a key switch on it that has a prime solinoid feature on key switch,much differance or not?snookie pa
much different!! This is just a simple push button so you don't have to pull your arm off lol
Do u know if this can be done on a 94 8 hp. I can't find crap on it. Awesome vid
see above
Thanks exactly what I intended to do
congrats!! thanks for watching!!
Have a 1870 Johnson 20R-70E. Where/how do I find the right solenoid for this outboard for the conversion? Thanks again. 👍👍👍
I though I linked the selonoid I used in the video.. Ill check now! just buy any on amazon that have 4 posts!! the mounting it part is the tricky part.
@@BlackoutBilll21 Can you tell me which one you bought/installed sku# brand? I bought 1 but it doesn't fit under outboard cowl/cover. No room. Thanks,
@@rocko112camaro www.amazon.com/gp/product/B01LBR1DRY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
which wire goes to the starter?? Just kidding.🤣 Great video and about to do similar job on a 9.9 Johnson conversion.
lol I was about to re iterate to help !! let em know how your 9.9 project goes! Id be happy to help anyway i can
Bill…I see you have the battery wires coming up thru the hole in bottom of pan.Going to put starter on soon as I get parts.Did motors initially use that hole in bottom.Seen a lot where they go thru a hole in face of motor.Hate to drill a hole if I don’t have to.
So the battery wire are going through where the original wire make hookup went on these controlled older big horsepowers!! Originally there was a male connector and the controls had the female. If you can find a way not to drill then all power to ya! For me the little hole with a button plugged in looks good but you gotta do what you like!! Keep me updated!
Ok. I have to drill hole for a switch but wanted to try not to for the battery cables. I saw a video where a guy added extricate start and he used a battery box and a small lawn battery and put the start switch and solenoid in the battery box .Nifty idea.
@@wish2fish37 hell yeag
Another quick question as I am getting ready to wire mine this weekend. So the push button gets one wire connected to the solenoid (one of the big posts) along with the battery. And the second button wire gets connected to one of the smaller posts? So you're essentially creating a short to activate the solenoid?
the solenoid is the open circuit and the button closes it! so you are correct!
@@BlackoutBilll21 you rock!
No YOU rock ! Lol thanks for tuning in and commenting!
Good video Bill. What’s your thoughts on using one of those battery jump packs on these with no charging system for battery. Not sure how many jumps you could get?
Couldn’t hurt except the jump pack lol give it a shot!!
Luved the way you described it and very simple to follow.
Ive been looking for this wiring video for some time now.
Fixed my problem no worries.
Great stuff my friend!!
VERY happy to hear this helped!! Thanks the comment!!!
Will this be bad on the engine in the long run? And how do I connect the kill switch?
Quick question do we have to take the prevy wire harness
What do you mean by Prevy?
Sorry like the previous wire harness cause the one that came with the boat and it have controls on it but they cut the wires of and the control cables off so now I just have a motor that I need to make run or at least see if it runs
It's a 50 hp Johnson
Oh one more question how do I install a kill switch too thanks
@@210fishing6 czcams.com/video/D3HRGZ7Sw5M/video.html
really well done. excellent idea doing a short and long version. how do you avoid starting with the engine being in gear? factory starters have a button assembled through the forward - reverse selector lever so that you cannot start when the engineer is in gear....
Thats a great question!. I dont believe there is a factory way... you could maybe rig a ground wire where the gear shift touches it and the starter button maybe? I dont know but Im sure its possible!
@@BlackoutBilll21 The factory button is built into the gear shift such that the starter button travels through a short tubular channel at the base of the gear shift to then depress the actual started push button. The first button won't travel through the channel if the gear shifter is not in the neutral position. My starter button is going bad and the replacement is hundreds of dollars.
@@frix57 WOW! not sure! sounds like your system is beyond my pay grade lol
😊👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼.
I Fckn love it.
Thanks!!
@@BlackoutBilll21 glad to hear you’re still sucking wind. It’s great to see a real human with real humor and a strong sense of sarcasm. The tube is rife with Fckn idiots. 🤣. That’s the truth:)
Great explanation of how the starter button works and how to wire it. I am having trouble with my key ignition and am thinking about bypassing it wit a push button. How would I kill the engine once it is running?
you could install a kill switch!! i have a video on that!! or you can pull the choke! what year? do you have a regular choke?
@@BlackoutBilll21 I have a kill switch. It’s a 60 hp Mercury 4 stroke engine. When I turn the key to the on position, the voltage from the battery takes a while to climb up to 12 volts. I took the console apart looking for a corroded connection. I found some and cleaned the connectors. That helped but I still notice the gauge doesn’t show the same as my volt meter. I think Tracker wired it half ass
@@heted1 sounds like youre on the right track! good luck!
I have a little pocket bike but lost key and have no battery. Can I by pass all that nd still start or will I need batte ri
Not sure… you can start anything combustion wise. Just need to spin those pistons somehow lok
@@BlackoutBilll21 thanks. I got it on but it wouldn't idle.
@@bennypacogerrte418 time for a carb rebuild!
@@BlackoutBilll21 thanks. I got it to work 👍👍
Hi there, great vid! Thanks for the time. Which solenoid did you buy?
amzn.to/3hpo9i7
Thanks for the love!
@@BlackoutBilll21 can you tell me which solenoid you used?
@@IsmaelPR32 the link above is the amazon link :)
@@BlackoutBilll21 I only see the push button link. Not the actual solenoid apologies.
@@IsmaelPR32 lol no worries… In my first reply to you in the comments I put the link
Did the button ever work?
yes sir!! like a charm!
Where did you get that push button?
ebay or amazon! I buy all my parts from them normally I can find you a link if you need it! let me know! Thanks for watching!!
amzn.to/38D9vPG
@blackoutbill contact me
How!?
Wire the switch , quit tryin to be a comedian
NEVER!! lol thanks for commenting!
Do u know if this can be done on a 94 8 hp. I can't find crap on it. Awesome vid
thanks!! sorry for the late reply. You can do this to ANY motor with a starter and/or/ toothed flywheel setup. not sure if the 8hp had that. can you send me a picture?
@@BlackoutBilll21 I been tearing it down. It's a 94 the flywheel doesn't have the teeth and theres no I can't think of what it's called but there's no part that looks like a starter but has rope around it. So don't think I can do it.
@@jshall1000 I have to agree with your assessment. Why do you want a starter? Is it hard to pull?
@@BlackoutBilll21 yea hard starting and I got copdand kids me
@@jshall1000 I’d look at your needle setting/ compression. Those motors can be started by hand spinning the fly wheel if tuned properly