Amazing woodworking tool never seen before!
Vložit
- čas přidán 10. 06. 2024
- This is the most innovative coping sled, with possibilities we have never seen before. How cool is it to make a half-lap miter joint with your router? And there are many more!
Buy the Coping Sled HERE!
www.banggood.com/custlink/KvD...
China Tools is a series where we put woodworking tools from China to the test.
If you want to see a ranking among all the products I tested over the last three years, visit my site: hookedonwood.online/China-Too...
You can also find my shop improvement series with plans here!
hookedonwood.online/Shop-Impr...
Links to products shown in video!
Coping sled
www.banggood.com/custlink/KvD...
Hooked On Wood landing page
www.banggood.com/custlink/vGG...
Coffee mug
www.banggood.com/custlink/3Km...
Water bottle
www.banggood.com/custlink/m3K...
Miter gauge bosch
www.banggood.com/custlink/GDK...
Miter gauge fence combination regular
www.banggood.com/custlink/DvG...
MFT style hold down clamp
www.banggood.com/custlink/KGG...
-----------------------------------------------------------------------------------------------------------
My Personal Banggood favorites of all time!
1. Hongdui Edge Trimmer
www.banggood.com/custlink/GGK...
2. Doweling Jig / Multi-row puncher
www.banggood.com/custlink/KDv...
3. Gweike Co2 laser
www.gweikecloud.com/collectio...
4. Mohoo Sharpening system
www.banggood.com/custlink/33v...
5. Drill guide cabinet jig
www.banggood.com/custlink/KDD...
6. T-ruler
www.banggood.com/custlink/3GG...
7. Precision square
www.banggood.com/custlink/DKv...
8. Miter square
www.banggood.com/custlink/GmG...
9. Height gauge
www.banggood.com/custlink/KGG...
10. Hongdui Miter Gauge
www.banggood.com/custlink/vGD...
-------------------------------------------------------------------------------------
My name is Dennis, and I am from Hooked on Wood.
Subscribe to my channel!
czcams.com/channels/uvj.html...
My CZcams channel is a hobby. This means I try to upload 1 a 2 video's a month. But this is not at a specific schedule. So If you do not want to miss my videos. Subscribe and click the notification.
Products I use in my workshop.
Table saw with dust system:
Felder 740S Slider
Felder 140
Workbench:
Incra master-R-router lift
AEG 1400w router
Incra 25" SL positioner with Wonder Fence
Drill press: Jet JDP 15B
Miter saw: Festool Kapex 60
Different links to products I use
Clamps:
Axminster trade hold down clamps
Piher Rail guide clamps
Micro Jig dovetail clamps
Bessey parallel clamps
Axminster trade parallel clamps
Push blocks
Micro Jig Gripper
Incra Push block
Thank you for viewing.
Best regards,
Dennis - Jak na to + styl
A week after ordering it, the sled has arrived all the way from China to Scotland. Real quality piece of equipment which obviously will give many years of service. Highly recommended.
I'm not a BangGood fan, but I've been subscribed to your channel and your level of integrity has outweighed my level of skepticism - just ordered mine. Thanks
Thank you Dennis. Ordered after watching your video. Delivered to me here in UK 7 days after ordering. A quality piece of kit.
For those of you that may have a Sawstop 27x16 inch router extension wing, this sled will not work correctly. When the sled runner is adjusted to have the two UHMW strips of the sled on the table surface to keep the sled level, the aluminum lip in the front of the sled will be in the path of the router bit. If you adjust the runner to get the sled out of the path of the router bit, the UHMW strip closest to you will be off the table - resulting in the sled’s aluminum bottom sliding on top of the cast iron table. I’ll try to add another UHMW strip (0.88mm thick) to “fix” this.
Dennis, I just recently found your channel. I really appreciate your honest approach in reviewing these tools. I ordered this coping sled based on this video and it was exactly as you described. It's a beautiful well-made tool on par with some of the very expensive tools that I have in my shop. This was also my first experience with Banggood. Shipping was as to be expected to the US, about 10 days, not bad. Transaction was smooth. Thanks again for the good content you're producing.
I saw this on Bangood 2 days ago, was anxiously awaiting the video. I just saw it and already ordered, thank you very much, my first Hooked on Wood product
Best idea for such a tool .Thanks Denis .
Thumbs up .
Those hold down clamps are truly exquisite, the most elegant solution I've seen for clamping work down, most easily adjusted, fast, etc.
Dennis this is the most complete and functional coping sled I’ve seen along with the best clamping system. Can’t wait until i can afford one
It's nice to see you working with a good company that actually wants to make better tools. I'm definitely going to purchase this sled!! Thanks for sharing!! Much ❤ Denis!!
Beautiful! Nice work, Dennis.
Ordered one! thanks Dennis for this beautiful piece of art :)
Wow..... very nice and certainly worth considering and thanks for the video Dennis
Just made first cuts. Solid clamps, tracks well in the miter slot, safe and affordable. Thanks
These items deserve your logo Dennis. They look great too. A Fusion of Art and Engineering.👍❤
Another great product and video! I was watching another woodworking video today and I saw he was using your T square! I got more excited than I probably should have but I'm happy to see woodworkers supporting each other and your great ideas being put to use. Congratulations!
Great product Dennis - nice to see you working with Banggood to produce top class products - hope this continues! Ordered my coping sled today, thank you!
Thank you denis, I ordered one too because I love your work and your video are the best in this area of interest.
Mine arrived yesterday, great piece of kit and well done Dennis for collaborating to make it so versatile. Your workshop videos are an inspiration and I am enjoying being in the workshop today on a very wet New Zealand day.👍👍👍👍👍
Looks great. Ordered one. The T ruler was really useful for drilling shelf pegs. If this is half as good (and it will be), it will be a brilliant purchase.
Awesome sled indeed, Dennis! Fantastic work! 😃
Stay safe there with your family! 🖖😊
Hi Dennis, great video! I ordered the template today. Thank you for the useful information you give us in your videos. You are the number one! Greetings from Italy
Congrats Dennis on another great looking and looks like an amazing project I hope that some day I can afford to buy these tools for my new work shop. Keep up the great work and videos.
Hi. Just received the jig. Very impressed. No manual, probably not needed but it would be nice. Just a suggestion, it would be helpful if you would have a manual and tips section on your website for your recommended 5 star tools.
I am going to get this for sure. Great to see it!
Mine arrived today Dennis, looks fab, can't wait to use it.... Well packed as well
Oooh that’s what it was!!! I saw that on the wall on your last video and I was thinking about it. Thanks for sharing
Sharp seen😊
Very interesting product, Dennis.
Great video, Dennis
I've been looking for a decent coping sled for some months. I don't like the "bridge" clamping system most use. This looks so much better and so much ,more versatile I purchased one immediately! Thanks. I'm looking forward to working with it,
Wow awesome work Denis it’s been a joy to follow your channel and see your growth and the works of art you produce, these banggood partnerships are just taking that to the next level. Congrats mate
Just today I finished the review in Italian of this product and I attributed to you the improvements even if in my version there is not your logo eh eh
I’m in the process of setting up a minimalist wood shop.
It will be mostly for cabinets using sheet goods, so will be using a track saw for all my cuts, no table saw. But there will be times I’ll want to make face frames, this will take care of that nicely.
Amazing!
Cheers Dennis you are a SMART MAN thanks again
Hi Dennis, I enjoy your videos and do watch them from time to time.
I wanted to give you a helpful note as I speak English as my first language.
At 0:50 you have the message on screen: DON,t FORGET TO
The correct spelling would be: DON'T FORGET TO
I hope this helps, thank you for sharing your videos with us.
Very good bit of kit except for one thing.
Included is a a thin pies of ply to support the work piece, obviously this will need replacing and they have very helpfully etched the hole spacing on the base plate. they are 37.5mm from the edge and 108mm apart. Now you might have the vision of a hawk and a rule calibrated in 0.5mm, but I and probably most people don't. How hard would it have been to place the holes 30mm or 35mm from the edge and 110mm or 105mm apart? That's probably the only thing that lets it down.
Toppie
As usual, a very nice video.
Nice! Really versatile sled, should work perfect for the table saw when doing cuts on smaller pieces. Ordered!
Congrats Dennis ❤
Hooked On Wood Coping Sled && WittWorks Super Fantastic Trim Router Base 1000 Pro! FTW!!!
Looks like a great coping sled.
Dank voor je video. Dit ding is super en zeker niet duur. Je krijg er tenslotte 2 holddown klemmen bij. Leuk je bezig te zien met houtverbindingen. Het is me net gelukt om het systeem van een "Kerfmaker Saw Grooves Adjuster" in mijn routerfence te integreren. Ook heb ik een systeem gemaakt dat ik van bovenaf exact kan zien waar mijn freesbit is. Natuurlijk niet zo chic als jou tools maar voor de fun.
Gast geniaal dat je via banggood werkt ... Voor het eerst dat ik dat zie op yt well done sir
Looks like a great product. Ordered at a great introduction discount! Thanks for working on this. Can't wait to get it into the shop.
Thanks TiM! Enjoy!
Dang it Dennis! I'm such a tool addict. Bought the sled and both cups. Love the T square BTW.
Oh great! thank you!
What size of T-slot do you need for the coping sledge?
Ordered! I’ve purchased every one of your 5/5 reviewed items. Officially broke now.
Are you able to provide insight into any upcoming collaborations with Hongdui, that you’re working on?
Also, if you’ve come across any remote switch retrofit for the Camvac that can quickly and independently control each of the three motors…thanks.
Hallo Dennis , wat een prachtig product weer.
Ik heb het gelijk besteld en het arriveerde mooi op tijd.
Aangezien jij kennelijk een kort lijntje hebt met Enjoywood, zou een extra tip of "wens" misschien kunnen zijn
om een keuze te geven mbt de schacht van de hold down clamps.
Als die ook in 20mm meegeleverd zouden kunnen worden, kunnen ze ook in een normale mft werkbank gebruikt worden.
groet,
Arno
Nice sled. Next tool you need to do is a fritz and franz jig and miter sled for the slider with manhood. The dog system plate from the coping sled with the miter gauge fence for a stop would be pretty cool as the felder miter system is around 1K.
Merci à vous les chanceux possesseure propriétaire de ce bel outil chinois
Hi Denis, have bought a number of tools recommeded by you including the wonderful mitre fence combination. I made the huge mistake of assuming that all table saw slots are the same (19mm wide) I have a Kity table saw that I knew was narrower but had decided to upgrade to a secondhand Startrite which I knew had a 19mm slot. It does... but it's too shallow for the fence!!! I can't see an easy way to modify it. I don't suppose Hondui make such items with different slot fittings? What are the dimensions of a Bosch table saw slot? Frustrating that I presently have £250 invested in very beautiful, but useless, hardware! Regards, Will Caro
Bonjour je crois bien que la fente de la scie Bosch est trop étroite, j'ai dû retourner cet achat il y a plusieurs années déjà, mais possédant une Makita don je me sert à une fente de 19mm et y ai installer le système Incra complet et fonctionne très bien je viens de la cédé à mon fils a l'occassion de sa pension, J'espère qu-il en fera bon usage.
What’s the max stock width when using it for 45 degree cuts? Looks like a well thought out tool for the price!
Great video as always Dennis!Dennis I have a Hammer C31 combination machine. I find the cross cut fence a bit crude. Do you think I can fit this cross cut fence on my slider. Many thanks. Ordered the coping sled straight after seeing your video. Keep creating affordable products please 😅.
Dennis, an answer would be nice. Holding my purchase because Banggood says the height limit is 110mm or 4.33 inches, which should be the height under the clamp head. But it doesn't look that way, it looks like that dimension is the height of the clamp post without the clamp heads. Meanwhile, the post height for the 'window' or plexiglass that rides on the router fence looks way less than that, which limits the thickness of the wood that will fit under it to process. Are there extensions or higher posts? Seems if we add on to existing posts, those post assemblies won't be as rigid.
Will this work with template cutting custom curves?
Can anyone please tell me what the two black washers are for, that are included with this kit?
hi dennis, i have bought your T ruler and i can say its such an very very good quality product !!! and beautifull.
I have a question:
Can you talk about the material of your router table and your workbench ?. i mean the black material of your both table, its like plastic ? its not an mdf product ! maybe a video about the stability of those products in time or how to make the good choice of material, (stripes, wear etc...) thanks for yours videao each one are amazing !!!!
Hello Dennis, that coping sled look awesome, considering ordering one, but one question in reference to the placement of the miter bar and distance to the bit. I have a Harvey table saw and a Harvey Router table with its two miter slots, a standard and a narrow one. The standard miter slot is approximately 43mm from the center of the router bit. What is the adjustability of the miter bar on the coping sled? Thank you for you assistance and always enjoy your content and fabulous work.
I also have this set up. The sled fits perfectly and the miter bar can be adjusted to move the sled closer or further from the bit.
As you show, the typical use of a coping sled is for routing the ends of workpieces. The issue often encountered is tear-out at the exit side. To prevent this, one uses a sacrificial piece of wood. But, I'm struggling to see how the combination of the reference pins and hold-down clamps accommodates this sacrificial tear-out prevention piece. Can you show us some examples in a follow-up video?
Good idea! I will do that. Because these clamps are very flexible, it is best suited for such a thing.
Great stuff.
Any change you get them to sell the Bosch miter track slide as a standalone product?
It's something impossible to find.
That can be a great idea, I do not know how big the market is, but I will give it a try.
@@HookedonWood I would 100% second this. I've looked for ages to find a Bosch sized guide rail that wasnt made of plastic. I noticed other people asking on the Banggood Q&A section about the exact same thing.
OMG... this does look great! Bummer... I have to go spend more money again!
DIRECT BESTELD, SUPER
Très beau et bon traineau a première vue et aussi très bien présenté et mille fois plus pratique que cellui que j'ai conçu il y a quelque année je vais en parler a mon successeur!!😏
Perhaps a fools question but what's the benefit of a coping sled vs using a mitre gauge in the slot? I get the coping sled would hold it down better but the force of the cutter is typically pushing the workpiece laterally, hence up and down would not be a big issue?
Nice looking product though
I noticed that the price is in euros. Can I get one here in the US?
Dennis is the hongdui miter gauge for small saws, I’m assuming it will fit Metabo saw sold in US. Is this true. Very interested in your comment please
Hi Steve, i can not answer this question. Have no clue what dimensions are for Metabo
This looks like a great design...does it include the miter bar? otherwise is there a recommended bar?
Good question
yes, include is the Miter bar👍🏻
Looks great and I was about to order one, but then the shipping is 36% of the cost of the sled itself. 😢
me..."ooh ive got a few extra quid in my account" , dennis .." not for long!"...
😂😂😂
Do you know of a coping sled that can be used with a Festool CMS router table. This does not have a T Track.. thanks Brian
You don’t need to install the bar for the miter track. That is an optional feature but is not necessary at all. What the track and miter slot do is to help hold the jig for repeatability. If you are careful like on most router table applications the miter slot never gets used. You would be safe to buy this jig with confidence.
Hi Dennis
How do you prevent tear-out on the trailing edge of the workpiece? Most router sleds have a sacrificial subfence on the backside of the workpiece. It becomes the reference edge.
The Same way.
@@HookedonWoodI only saw the clamps for the workpiece, not the fence.
Als je vanaf nu toch samen producten helpt bedenken. Aub een variant op bench cookies waar je de keuze hebt tussen stangen van 19 en 20mm afhankelijk van de grote van de dogholes op je werktafel want momenteel bestaat er enkel 19mm wat niet compatibel is met een mft
Nice product! But/And in a certain way it (also) shows that every table saw, router table and, yes, band saw should come with a proper sliding table with a minimal gap tot the moving cutter.
I hope you use a Moccamaster (Hand made in the Netherlands) to brew your coffee like me?
Not jet, but I will look at it. But you can recommend it I understand!
@@HookedonWood Dennis: Yes, made by your countrymen for some decades now, regarded as one of the best coffee makers available. Not cheap, but like many of the tools you recommend "you get what you pay for ". Not only makes a fantastic cup of coffee, but looks amazing on the countertop too. "5 stars".
I didn’t see a way of including a sacrificial piece to stop tear out on the end of cuts? Please could you address how the sled accommodates this?
Watch my last video. I addressed this question 👍
@@HookedonWood Thank you Dennis. I shall be buying this sled, it looks as good as the Axminster product which is twice the price 😊
Hi. How do you attach a sacrificial piece to prevent tearout?
Just place at the right side. You van also clamp this piece as well, but I do not think that will be necessary.
Hi instead of clamping I think double sided tape may suffice.
Can you give me the website where I can order some of these items than you
Expensive
"What template are you using at 9 minutes and 27 seconds?"
It is part of the INCRA router Fence.
@@HookedonWood Thanks ! What device would you recommend for making tenons while holding the piece of wood vertically other than this incra device?
First of all, I want to thank you for the time and effort you put into making your videos; I know it's no small task. However, I am disappointed that you are now charging nearly €50 for access to the plans on your website, especially since they used to be free. Many viewers like me support your videos and you already generate revenue through advertisements on CZcams.
I've noticed that your channel is becoming increasingly commercial, with income from both affiliate links and the sale of your plans. I understand that quality content has value and that creators deserve fair compensation, but I hope you can find ways to keep your content accessible to everyone, perhaps by offering a differentiated pricing model or special deals for loyal followers.
Thank you for your understanding, and I hope you take this feedback to heart.
I am a huge belever in all of your work - design and execution. However I cannot agree that this sled covers all the bases. My biggest need in using a coping sled is the sacrificial wood for preventing chip out at the end of the cuts. Every piece has to have a sacrificial piece of wood backing up the exit of the bit or blade from the wood I am creating. This sled makes NO mention of it nor does it appear to make accommodation for affixing one.🤥☹
Good that you mention that. Offourse is that possible and even better as with the other sleds available. It is just a piece of wood and with the clamps you have more possibilities to clamp both the sacrificial fence and your workpiece.
All that foam is not environmentally friendly.
You were a long time defining the function of a coping sled. Why? It was in the title. Why waste our time getting to the point? You are not alone in doing this, unfortunately.
The level of entitlement in this post is truly mindblowing.
Not to mention the epic level of snark. Sheesh!
Maybe CZcams just isn't for you! And I think entitlement just about sums it up