Turn your Trailer Jack into an Offroad and Trailer Dolly Combo
Vložit
- čas přidán 28. 11. 2022
- In this video, I will show you how to Turn your Trailer Jack into an Offroad and Trailer Dolly Combo. This will allow you to roll the trailer on grass, sand, dirt, gravel and other uneven surfaces.
Gwinnett Lawns performs these services and others such as lawn care, crepe myrtle pruning, light landscaping, spring and fall cleanups, leaf removal in Lawrenceville, Dacula, Grayson and surrounding areas. Take a look at my webpage gwinnettlawns.com/. Check out my new Truth Social GwinnettLawns
#trailerjack
#trailerdolly
#gwinnettlawns
Here are the items I used in this video.
Rubber Coated Magnet Mount GoPro▶ amzn.to/3UvSOeV
GoPro Hero 9 Black▶ amzn.to/3X0DZTi
Iphone 13 Pro▶ amzn.to/3UUwvzI
Mack's Ultra Soft Foam Earplugs▶ amzn.to/3CDHdUG
Decibel Defense Safety Ear Muffs▶ amzn.to/3Cbkpu6
Solaris Sun Cap▶ amzn.to/3ypa1xO
Scotts Motorcross Goggles▶ amzn.to/3CiW1H6
Swim Goggles, YAKAON Polarized▶ amzn.to/3fNO0SP
RZ Mask M2.5▶ amzn.to/3MiJx70
Equipment I am currently using:
-------------------------------------------------------------
Hour Meter▶ amzn.to/31k2RuG
Echo PAS 2620 ▶ amzn.to/2WCS4qS
Articulating Hedge Trimmer ▶ amzn.to/2TBd8fq
Echo SRM 225 String Trimmer▶ amzn.to/2MRmLV6
Honda HRX 217 Mower▶ amzn.to/2D4t3Mj
Echo PB 8010T Blower▶ amzn.to/2D32bfO
Edger Blades▶ amzn.to/2WaIX0f
Jungle Jims Mower Lift▶ amzn.to/2WjoZR0
DynaplugTire Plug Kit▶ amzn.to/31FDql2
Powertye Ratchet Tie Downs▶ amzn.to/2MpNcSL
Etrack section▶ amzn.to/2s6LhLH
Etrack mount plate▶ amzn.to/35RYjLC
Longacre Oil Filter Cutter▶ amzn.to/2R6Jct4
BigBoyJapaneese Saw▶ amzn.to/2Jzh9Sa
gwinnettlawns.com/
Awesome idea
I've been seeing this in my brain for a few days after moving my camping trailer got out of hand. It will be substantially heavier duty, but the same basic idea. Thanks for bringing my brain images to life.
Well done. Didn't know where you were going with the iron tee until the handle came out. You made a great idea even greater. Thanks!
Great idea, I have being looking for a video like this, I'm 79 years old and this will make it very easy to move around and I also like the full handle. Great Job! thanks
You wouldn’t happen to have a part list for home depot would you? I would love to do this for my popup camper.
Awesome tutorial and idea. Used this on my landscape trailer. Saves me so much trouble because it sits in my back yard. Thank you sir
Thank you, thank you, thank you. Just made this hot dogger (hot dog cart owner) extremely happy. 😎
I suck backing my trailer into my yard. It's a tight alley. I'm doing this 100%
yahoo good job thanks for sharing , made a buncha people easier trailering
That is brilliant.. I’m stealing this idea and using it on my trailer. Thumbs up
I even put a set of bicycle grips on
That’s amazing I’ve never seen a set up like that I love it thank you so much for the link
We just got an old home made boat trailer that is missing the jack wheel....I'm so doing this to it! Thanks for the video, from Locust Grove, Ga😊
Thanks to you, I made this on my pig cooker! It works awesome!
I came looking for big wheels for a trailer jack. I left seeing away to pull my trailer with its big wheels. You made a great idea even better. I don't even have my trailer yet, but I'm excited to put this mod on it when I get it.
Just great mod, thanks can’t wait to upgrade mine
I'm working on making this for my 20' pontoon boat right now. But, the boat is a little heavier. So I'm drilling the wheel axle holes on the jack to 5/8" And using a 5/8" axle. It will make rolling even easier. And more precise. I think. I'm also gonna weld up a trailer latch for my atv to move it around. I use the atv in tight spaces. Thanks for the design. I'm just beefing it up a little.
I’d like to see how easily you were able to move your boat. I need to do the same for my 17’ bowrider but thinking it might be too heavy, plus I have to move mine over packed dirt in an alley. I’ve seen 3-4 people all help push while 1 guy at the front steers on the original plastic wheel on smooth concrete. Do you think same could be done with this mod, maybe 12” wheels? 1 guy steers and pulls while 3 at the back push? My boat is 1,800 lbs with an aluminum trailer. Don’t know total but I’d guess right at 2,000. I need to do this to get boat nose in, into my back yard to service it. Thanks.
Great idea, thanks
Found it. Thanks. My next project
Will be great on my Boler camper 😊
Genius idea 😃☝👍
outstanding!
Brilliant idea exactly what I was looking for. Thank you so much. Did you get a chance to try out the 12-in wheels?
No not yet.
This is a great idea, thanks for sharing!! I’d love to use it, but I park on a pretty steep incline and need a solid foot to secure the trailer to keep it from rolling. I guess I could have two jacks, but that is just more complicated.
2 of those little yellow wheel chocks . . . And connect them together with cheap dog chain just far enough apart to snug the tires, then a length to bolt them to the frame
How would I add this to a trailer jack that doesn’t have a wheel at all ?
Where did you use the pvc pieces?
I'm just worried about always having flats, my luck hasn't been great with those pneumatic wheels.
That's awesome. You should have patented it if it's not out there yet?
Your parts list is not a list used in this video?
Great video....I'd be interested in seeing how you mounted that spare tire
czcams.com/video/d-WtdBUbd4s/video.html
@@GwinnettLawns THANKS!
can u make a list of the parts and length need, thank you
In the video, I tell you exactly the size and the length of each piece.
It just says 1/2 inch. Like the pvc spacers. 1/2 inch by what
To build the modified off-road capable trailer dolly, the presenter used the following parts:
1. **10-inch long, half-inch size bolt**: Serves as the axle for the new wheel setup.
2. **Lock washer**: Used to secure the bolt and prevent it from loosening.
3. **Nut**: Fits onto the bolt to secure the wheel assembly.
4. **Four flat washers**: Placed at various points in the assembly to ensure smooth operation and distribute pressure evenly.
5. **Two pieces of half-inch PVC**: Used as spacers to ensure the wheel aligns properly and rotates freely.
6. **Two half-inch black iron pipe nipples**: Threaded on both ends, these serve as part of the handle assembly for maneuvering the dolly.
7. **Two half-inch malleable tees**: Used in the handle assembly for grip and leverage.
8. **One five-foot piece of black iron pipe**: Threaded on both ends, forms the main handle for pushing or pulling the trailer.
9. **10-inch pneumatic wheel**: Chosen for its size and air-filled design to smoothly navigate over uneven terrain and obstacles.
10. **Copper or black iron spacers**: Additional spacers for precise wheel fitting and rotation.
These materials were selected for their durability, availability, and the practicality of assembling a robust off-road trailer dolly. The emphasis was on using standard parts that can be easily sourced from home improvement stores like Home Depot or Lowe's.
Narkfam great job. What are the complete measurements? 1/2 inch by what
Very nice can you do it with a Harbor freight trailer jack?
Should be able to do it.
Sir..... how big are those spacers??
They’re about an inch but if you watch the video I tell you depending on the wheels you’ll have to play around with it a little bit and also it’s going to depend on what brand of Jack you originally got for the trailer so it’s going to vary.
What was the PVC spacers the used for?
I was going to use them, but decided to use the copper spacers instead.
@@GwinnettLawns did you use copper pipe?
@@Ollywood00 yes look at the five minute mark on the video.
@@GwinnettLawns What is the length of these spacers?
How much did this cost? Tires from Harbor Freight?
Thanks for thumbing it up. How about the cost? Tires from HFT?
🤌👌
Doesn’t work when you have a load on the trailer
You’re not supposed to roll around the trailer with the load on it.
@@GwinnettLawns curious how well this would work for my Meerkat Travel Trailer. It’s about 1200#. Can’t “unload” it like you do your utility trailer. Plus I have about a 4° driveway slope. Been looking at a Trailer Valet RVR3 because of the slope.