This video is fantastic. I'm an automotive engineer and use 3D printing for my CAD prototypes, but hadn't ever been trained on setting up the prints after I created the designs. I am always having to rely on others to help me with my settings because no one seemed to be able to explain the settings to me either. This is so clear & useful for me. I appreciate it!
Honestly I don’t see the problem as others say by you being to close to the camera. I can here you very clearly. The fact that you seem as though you are trying to speak clearly due to being a perfectionist, or compensating for your accent. Either way you’re very patient and was more healthful then most videos I’ve seen. If I don’t have to rewind or repeat the video, then it’s a BIG Plus. Again very detailed, very well outspoken, sharp camera quality...etc you seem like an expert. Thanx for not using background sound or music during the lesson. I would only like intro music and ending music. As long as you keep it short. It is for knowledge purposes. Again thank you keep up the lessons as such for effective learning for all.
Another great video!!! I like your videos because you take your time to explain it in simple terms so it is easy to understand for “novice” 3D printer enthusiasts like me... Danke Schön!!!
Low quality filaments can have contaminants that will block small nozzles. For low quality filaments, with contaminants, I recommend a nozzle of 0,5 mm. For nozzles lower than 0,2 mm, is good to have something to protect the filament from the dust, because the dust can block the nozzle. I'm not saying this will always happen.
My issue is that after a few hours down the line, mid print, the extruder stops extruding. No clogging. Just direct drive gear marks on the filament. Using pla, at 200deg, 0.3 layer, 0.8 retraction. Please help. Ender 3s1pro
Hi my kossel is having an issue, when i initiate a print it prints at about 270 mm off the hot bed, how do i fix that, i have auto leveling, am running marlin, the printer is anycubic kossel delta linnier plus.
but sort of much depending on the printer it self and what it can handle, and like 60mm/s printspeed and about temp on 205 C prints fine good finish on it , now u want to print on about 80mm/s with same results increase the extrusion multiplier 0.01-0.04 and increase the temprature to sort of 220-225 (on pla sort of an example) but good video man keep it up
This video is fantastic. I'm an automotive engineer and use 3D printing for my CAD prototypes, but hadn't ever been trained on setting up the prints after I created the designs. I am always having to rely on others to help me with my settings because no one seemed to be able to explain the settings to me either. This is so clear & useful for me. I appreciate it!
5 seconds into this video and I say what a great sinematic effect
Danke. Your clear and thorough explanation of the different base settings as well as the images are exceptionally helpful.
Finally! This is the type of video I was looking for!
Well done, informative video. I appreciate the lack of annoying background music. Also, your diction is excellent!
I love positive feedback: :)
Honestly I don’t see the problem as others say by you being to close to the camera. I can here you very clearly. The fact that you seem as though you are trying to speak clearly due to being a perfectionist, or compensating for your accent. Either way you’re very patient and was more healthful then most videos I’ve seen. If I don’t have to rewind or repeat the video, then it’s a BIG Plus. Again very detailed, very well outspoken, sharp camera quality...etc you seem like an expert. Thanx for not using background sound or music during the lesson. I would only like intro music and ending music. As long as you keep it short. It is for knowledge purposes. Again thank you keep up the lessons as such for effective learning for all.
Helpful not healthful lol. Typo
Very good video . Keep up the good work.
Cheers
Great explanation for a new guy like me. I will definitely be watching more. Thank you.
This was a great and informative video. Thanks!
I have been watching lots of your videos recently, keep up the great production quality and content!
I will!
Good video! You Learned me a lot about 3D prints!
Very helpful
This vid was so helpful for me as a beginner, I could understand everything so clear, Thanks
I know your videos recently, and was impressed. I look forward to watching your new video.
Another great video!!! I like your videos because you take your time to explain it in simple terms so it is easy to understand for “novice” 3D printer enthusiasts like me... Danke Schön!!!
Appreciate the vid, informative and detailed pics help a ton. I'm just now starting to print so I'm digesting a ton of data. This helped!
Great video. Really informative
Great video, thank you for the tips!
Thanks for the video, I'm doing some research cause I'm planning on buying one. Keep up the good work!
Great information! Thank you.
This video is so easy to learn from! Thank you.
Great video iam brand new to this and you helped me a lot.
Great video, lots of useful informations for a beginner like me!
Thanks for the advice. What if you increase heat as you increase speed. Instead of keeping same temp but higher speed.
Some of yall are hella mean, just focus on this man's great content lol
Very good basics. Maybe you not covered retraction and cooling, but anyway, it's very informative and practical piece.
Thank you, good info!
Low quality filaments can have contaminants that will block small nozzles. For low quality filaments, with contaminants, I recommend a nozzle of 0,5 mm.
For nozzles lower than 0,2 mm, is good to have something to protect the filament from the dust, because the dust can block the nozzle. I'm not saying this will always happen.
Thank you for the video. I learned a lot from this.
Danke für die einfache Erklärung. Gut gemacht
Really good video. Enlightening! thank uo so much
Thanks
Your mic is so good it sounds like a asmr video
Nice video. I learned a lot. Very good information. :)
Very informative, great video
Thanks! I’ve learned a lot!! Regards
Excellent young man clear instruction with picture keep up the good work
NICE VIDEO
Helpful video 👍
Can you please tell me how to change the raster angle ??
Is 2 and 2.1 a big difference I’m new to this stuff
Very nice video and explanation. Please ignore the toxic people commenting here.
A lot of valuable information. Cannot wait to see your new videos :)
thank you it was very helpfull
Awesome! This Really Helped!
Happy to hear that!
My issue is that after a few hours down the line, mid print, the extruder stops extruding. No clogging. Just direct drive gear marks on the filament. Using pla, at 200deg, 0.3 layer, 0.8 retraction. Please help. Ender 3s1pro
The video was very helpful
Good vid, thank you
Very helpful. Thank you!
Thanks Budd! learned a lot. thanks for taking your time to explain everything in very good way. liked, commented and about subscribe! ✌🏻
Great video!
If I go from .4 to .25 mm nozzle what settings do I need to change?
Thank you
Hi my kossel is having an issue, when i initiate a print it prints at about 270 mm off the hot bed, how do i fix that, i have auto leveling, am running marlin, the printer is anycubic kossel delta linnier plus.
thanks! good video! I am impressed by your English usage as well, better than many native speakers. Keep up the good work!
10:00 oh, a "Giger print"
Good list. Thank you!
No offense but Just don't creep on the camera anyways keep it up with your videos
@Kendrick Harrison The Internet is a harsh place, Its Expected, you can't control it.
Hey, nice video but pleeaaaassseee... go a little bit further away from the camera
He should get closer with each transition 😜 Learned a lot!
His head is exploding lol😂😂😂
Layer thickness = 0.7(max) nozzle diameter
Hey whats the best printer to get for a base with ok speed and detail?
depends on your budget, I had good luck with the CR-10, if you have more to spend, look at the prusa printers.
what about infill?
Look everybody its Megamind!
excellent video, thank you a big thumb's way up and sub from me!!!
Does it make beer ? Surely it`s time to make something we need, beer!
This is Edwart Norton when he was young xP
JIMMMMMMMYYYYY!!!!
No it is Ji ji ji m m m my!
A guide to set the correct extrusion: czcams.com/video/w_Wb0i0-Qvo/video.html
no
but sort of much depending on the printer it self and what it can handle, and like 60mm/s printspeed and about temp on 205 C prints fine good finish on it , now u want to print on about 80mm/s with same results increase the extrusion multiplier 0.01-0.04 and increase the temprature to sort of 220-225 (on pla sort of an example)
but good video man keep it up
tongue reduction yes?
maybe you should add some sub titles
You ok? You look like you stayed awake for a whole week.
That voice does not match that face... he looks like a kid... but good content...
Deine Aussprache alter 😂
Alex Vinci Well, he has something to say. That's the important part. What do you have to contribute? Besides insults?
looks like u have a not so good printer
way too close to the camera. so freeky. and visit linguist.
Michal Skubák You should visit an orthographist.