Jeep Grand Cherokee Window Motor/Regulator Replacement (1999-2004)
Vložit
- čas přidán 27. 08. 2020
- Today, we show how to replace the wiper motor and regulator for the front doors on your 1999-2004 Jeep Grand Cherokee.
🔔SUBSCRIBE for more FREE how-to videos!🔔
✅My CZcams channel - / pkwydr
✅Check me out on Facebook - / tonythetruckguy
Front driver side motor/regulator - amzn.to/34DNnnk
Front passenger side motor/regulator - amzn.to/31AYbAI
Rear driver side motor/regulator - amzn.to/3jscQEa
Rear passenger side motor/regulator - amzn.to/3gFnc1Y
Door panel clips - amzn.to/44vwTsz
My equipment:
Milwaukee Fuel 1/2" and 3/8" cordless impacts - amzn.to/2wUnQY2
Go Pro Hero 7 Black - amzn.to/2zY1sLT
Go Pro Hero 7 Black WITH SD cards and batteries - amzn.to/2zXxR54
Accessory kit - amzn.to/2ZWIQXc
iPhone 11 Pro Max - amzn.to/2K5pLwB
Viofo A129 Pro Duo 2-channel dash cam (4K) - amzn.to/2XXtSBO
Viofo A129 Duo 2-channel dash cam (1080p) - amzn.to/33Xutr6
Adjustable PC mic with pop filter - amzn.to/2Q4MJqw
The intro song is "Karma" by Parkway Drive - • Parkway Drive - "Karma"
Off of their album "Deep Blue" by Epitaph Records - • Parkway Drive - "Samsa...
Check out their newest album "Reverence" - • Parkway Drive - "Wishi...
Copyright Disclaimer -- "Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational, or personal use tips the balance in favor of fair use."
💥Create a CZcams subscribe button green screen animation like mine💥
Free Stock Animations [CCM]
Source: • 🎥 SUBSCRIBE BUTTON & B...
🎸Outro music royalty-free "Dash And Clash" from Audio Hero🎸
www.audiohero.com/ - Auta a dopravní prostředky
GET YOUR PARTS HERE -
Front driver side motor/regulator - amzn.to/34DNnnk
Front passenger side motor/regulator - amzn.to/31AYbAI
Rear driver side motor/regulator - amzn.to/3jscQEa
Rear passenger side motor/regulator - amzn.to/3gFnc1Y
I'm attempting this and wanted to make sure I bought the correct plastic clips because I will no doubt destroy them upon removal of the panel. I'm just beginning to learn how to work on vehicles. Did I miss the link for the clips somewhere?
@@jenniferkeller7744 I think I forgot to post those. Here’s a general google link. I think any of the yellow ones will work - www.google.com/search?q=2002+jeep+grand+cherokee+door+panel+clips&sxsrf=ALiCzsZMlp3cvLSH5gBmuqgV9K3YGiXtHw%3A1660431498732&source=hp&ei=iiz4YoaWKOGZptQP2MCiuAE&oq=2002+jeep+grand+cherokee+door+panel+clips&gs_lcp=ChFtb2JpbGUtZ3dzLXdpei1ocBADMgUIABCABDIGCAAQHhAWOg0ILhDHARCvARDqAhAnOgcIIxDqAhAnOgQIIxAnOgQILhAnOggIABCABBCxAzoLCC4QgAQQxwEQ0QM6CwgAEIAEELEDEIMBOgsILhCABBCxAxDHAzoICC4QgAQQ1AI6CAguEIAEELEDOgsILhCABBCxAxCDAToFCC4QgAQ6CAgAEIAEEMkDOggIABAeEA8QFjoFCAAQhgM6BQghEKABUIMKWPZHYOpMaAJwAHgAgAF9iAHGIJIBBTIzLjE4mAEAoAEBsAEP&sclient=mobile-gws-wiz-hp
Thanks dude, the shop wanted $350 for parts and labor and was able to handle this on my own with a $35 salvage part and minimum swearing
😂 minimal swearing is always a good sign
I am attempting this tomorrow. Wish me luck. Thankyou for the video! Good angles, good explanation!
Thanks! Good luck!
@@TonyTheTruckGuy Just to update I was able to replace the part no problem! The only thing I had to do was pickup a 10mm bit. Thanks again so much! The shop quoted me 300 and I got it done for 50.
Any time! Gotta save money where you can!
How did it go is it still working?😂
Thanks man, I just replaced this same part on my own jeep. Have a good one!
Glad I could help, you as well!
Great step-by-step instruction. Was able to switch out my regulator with no problems. Thanks, Tony! 👍
Thank you young man! I have not done this in so long I forgot how. I think this will require beer.
Always haha
@@TonyTheTruckGuy Last time I wrenched on a car, this thing called u tube didn't exist. Getting too old to rely on motorcycles alone.
Very clear and concise, great camerawork I think anybody should be able to handle this job just fine after watching this video. Thanks for posting!
Thanks for the positive feedback, glad it helped you out!
Great job on the video as well as the much appreciated information you shared , Thank you !
Thank you. I followed your guide and was able to replace the window motor. I saved a bundle.
Bro!!!! Thank you SO MUCH for this video. This one helped me so much more than other videos. I just finished and my window now rolls up...and down!!!! Yes!
Excellent tutorial . Thank you. Fyi, i have a 99. The torx is indeed T25, all the other bolts/nuts on regulator were 10mm.
Thank you!
Very good video! Excellent camera shots too! Trying this soon.
Thanks! Good luck!
This video was a damn life saver. THANK YOU!
Perfect thanks for the video!
Thanks for the help! Worked great!
Awesome video....thanks so much brofessor😅
🤣 Glad I could help!
EXCELLENT VIDEO, THANK YOU FOR YOUR TIME
Great video!!! I need to switch out the one on a rear door. Hope it goes as easy as yours did! Thanks.
Thank you! Your video helped me a lot just 20 minuets ago. Placed a like on the video a few days ago, but just got to installing it and had to re-watch. I live in Minnesota and was waiting for it to be just above freezing. I THINK my wife was getting tired of using the rod to open the door.
HAHAHA. Yeah, the weather cooperating is definitely helpful if you don’t have a heated garage.
Doing this tomorrow!
Good luck!
Great vid!!About to replace my driver window motor.Can you show the clips as you said in ?
The yellow door panel retainer clips? These should be it right here - amzn.to/44vwTsz
Almost skipped then heard Parkway Drive.... watched the entire thing twice. Good marketing sir.
🤣🤣 Fantastic! Thank you! 🤘🏼
Beware of which part you are buying as these regulators are date specific. If your Grand Cherokee is pre March 09, 2000 it will take a different unit which has three mounting studs on the steel (not plastic) gear drive mounting plate and tighten up the three nuts. After March 09, 2000 it will have a plastic mounting unit that you screw into place, and do not over tighten as it will strip the female end. If you have the right part the swap should go smoothly without any drilling or having to get new hardware. Actually; read the entire sellers description of the part so you know what you are getting, if the description says 'more' to read then read it, this will prevent you from a return. A good video Tony. Cheers DIYers.
March of 2009, or March 9th of a particular year?
@@TonyTheTruckGuy March 09, 2000 and prior year GC will have three studs which will fit directly into the three slots at the center of the door frame attached with three collared nuts. The manufacture build date can be found on the inside front door jam right or left side.
@@roadrunner8428 Good to know! Thanks!
Quick info.... We just ordered a over 1000 units of this door panel clips so when you guys need some pm me so we can hook you all up. Later we will sell them on Amazon.
Lol yours came out so easy
I had to wrestle it for a few minutes off camera to figure out how to get it out of the door hole haha
Where can u get plastic clips if they break off when taken off panel? My local dealer doesnt carry them
See if you can at least get the part number from the dealer and check online or local auto parts store for them. Unfortunately I don’t have the number for them
I ordered this motor for the passenger front. The mounting plate on the motor does not match up with the door. Read the comments about this product on Amazon, there are other complaints about the motor mounting bracket. Besides that, the video is good. I returned this product today. See my comment below if you have a 1999-2000.
Was that the one I have linked in the video description?
@@TonyTheTruckGuy Yes. I've learned 1999 and 2000 Jeep Grand Cherokee mount differently. Mine has studs on the motor that take nuts and a different hole pattern.
@@pennypackmtb2542 Good to know, I’ll list a different part for the 99-2000, thanks. Sorry for the mix up!
@@TonyTheTruckGuy www.1aauto.com/1999-00-jeep-grand-cherokee-front-driver-side-power-window-regulator-trq/i/1awrg00220?trk_msg=BASB59MHJLC4JAK36P746S9NBC&trk_contact=STT09HE0KHRIV8HHNVSGPSOBR0&trk_module=tra&trk_sid=DH0IED9OPLTLMAEBSMUDLUMLQS&Product&PostPurchase&A+PostPurchase
Tony! i did this! Thank you, but problem: window seems stuck. Just like, uh, before. You ever encounter that?
What do you mean stuck?
Its tryin! i can tell that, but its not going up, or down to speak of. Im worried its actually the wires in door(jam) but as it is, no go. Gonna start trouble shooting as soon as i can unbreak my heart
@@sandozdelysid The wires are definitely a possibility in that rubber accordion of the door jam as you mentioned. It's just odd because you'd think it would either work or not work unless the wires are just making very poor contact or can't carry the electrical load because they''re basically broken.
So the window escaped the track, i had to take it out, alot of crying and a missing 8mm socket later, it works again! Much love 💘
@@sandozdelysid Haha ok that makes sense, it must have been binding. At least you didn’t have to monkey with wires in the door jambs! Hah
Are these all the same steps if the window has fallen down, out of the track?
Same steps to get the door apart, yes. But you won’t know why the window fell off the track until you get in there. Could be the regulator or could be broken window tracks.
Gotcha. I assumed it was the regulator because the day before it fell, the buttons were not working to roll down. We’ll buy both and see what it is! Thank you
No problem, good luck!
near the door handle area on my door is hard to pull off, seems I removed all the door panel clips but for some reason right near the interior of the door handle it is hard for me to take off, had to even take a break and I'm afraid if I pull too hard something will break(that isn't a door panel clip.)
You removed the screw I showed at 1:05?
@@TonyTheTruckGuy Yes removed all 3 screws on the outside
@@TonyTheTruckGuy Actually, I just checked and I had not. Thanks haha...
@@TonyTheTruckGuy i was working on my rear right door as well and i guess i got confused and thought i had already removed that one since I did the last one
@@thecyanglo5005 At least it was an easy fix haha
5:02 n 5:06 😂😂😂