Window Regulator Issue FIXED - Jeep Grand Cherokee

Sdílet
Vložit
  • čas přidán 17. 10. 2021
  • Today I tackle a very common issue on older vehicles.. windows that do not operate properly or at all. The vehicle in this video is a 2001 Jeep Grand Cherokee WJ, but this process will be very similar for most vehicles.
    I will show you how to diagnose faulty parts, then replace them with new ones.
    Power Window Regulator with Motor Replacement for Jeep Grand Cherokee WJ 2000-2004 Front Right Passenger Side:
    amzn.to/3vgErzk
    Get 10% off all GRYPMAT gear by using code D&E10 at
    www.grypmat.com?aff=DEinthegarage
    HAS ONE OF OUR VIDEOS HELPED OR ENTERTAINED YOU?
    Want to help up make more?
    Checkout D&E Merchandise and our Patreon Page..
    T-Shirt, Beer Koozies, Stickers and More:
    www.etsy.com/shop/DandEintheg...
    Become a PATREON and receive D&E gear as well as exclusive content:
    / dandeinthegarage
    We hope you enjoyed this video and will keep in mind that all information included is intended to be purely academic and in fact is only the opinion of D&E. We are not professionals, nor are we qualified to knight you a professional. D&E want to ensure that anyone modify or fixing their own vehicle does so in a safe manner which leaves the vehicle in a legal, roadworthy state. In short, DON'T BE A MONKEY WITH A TOOL BOX! If you don't know what you are doing, leave it the professionals!
  • Auta a dopravní prostředky

Komentáře • 85

  • @focused0002
    @focused0002 Před rokem +1

    Thank you Brother...
    I watched your video at 11:30 this morning...went got the part, found a mechanic and now my window is fixed...under $200-- thanks to you 🥰
    (African Woman here...hence the hearts 😇🤣)

  • @WoodMntSeaBear2
    @WoodMntSeaBear2 Před rokem

    My jeep has had this issue for a while. Thanks! I'm just learning how to take care of my vehicles at 30.

  • @williamsinger4124
    @williamsinger4124 Před 2 lety +4

    WatchJrGo just bought a clean 4 liter WJ. You should get it lol

  • @OuttaSighTmind
    @OuttaSighTmind Před 2 lety +1

    Love the junkyard videos and great info your guys be dropping…more junkyard vids

  • @RocHopn
    @RocHopn Před 2 lety +6

    Use goo-b-gone. Citrus based. Good stuff get that adhesive off!

  • @jame2182
    @jame2182 Před 8 měsíci

    Fascinating, interesting, and informative. Thank you sir for teaching me

  • @randomperson-gy5ee
    @randomperson-gy5ee Před rokem

    Love the MacGyver approach!

  • @stevenbranning1993
    @stevenbranning1993 Před 5 měsíci

    Thank you for the video...the exact issue on the same window.

  • @alfredolopez-bruce6199
    @alfredolopez-bruce6199 Před 8 měsíci

    Thanks for the video. What do you call the rubber feel like liner behind the panel? I'm replacing the window regulator. Thanks.

  • @stevensprojectgarage99
    @stevensprojectgarage99 Před 2 lety +2

    Just had to do that last week my 99 Cherokee

  • @MrMrsregor
    @MrMrsregor Před 2 lety +3

    so, those were the wj window clips ;)

  • @user-jn7he9cx4s
    @user-jn7he9cx4s Před 6 měsíci

    Thanks! I basically just had this exact same issue, window goes down on its own. I can hear the motor working but window isn't going up. I now have a better idea of what its going to take to fix it.

  • @johnreynolds9089
    @johnreynolds9089 Před 9 měsíci

    Thanks brother... Danny with a cable jam issue as we speak. I disassembled and realized it was cable driven, and decided to do some online research before proceeding...bout to remove and repair if possible😁

  • @ianwalker2896
    @ianwalker2896 Před 2 lety +4

    I always use paint thinners for glue removal, or a house brick is quicker. lol

  • @joshburfoot7986
    @joshburfoot7986 Před 9 měsíci

    Awesome video! I have an 04 and my back right window will go down, but not back up, do you think it’s the regulator in that window? When I try the master switch on driver side I hear a click on the passenger door like the circuit stops there and doesn’t go to the back right window?

  • @Trueno1600
    @Trueno1600 Před 2 lety +1

    Methyl Hydrate often works great to dissolve adhesives, but not every kind. It's also pretty safe; when I worked in auto collision repair, we had great results with residue from stickers, clear vinyl film from lower doors and rockers, and pretty much any vinyl graphics or wraps. And it never attacked automotive paint, but I've seen weird stuff happen with enamels though.

  • @glensta4468
    @glensta4468 Před rokem

    I used carb and choke cleaner to remove stickers from my back glass. Worked like a charm.

  • @anthonyhanzel
    @anthonyhanzel Před 2 lety

    Thank you, I did tht quicker then anticipated

  • @macsloan58
    @macsloan58 Před 2 lety +1

    Very enjoyable. Far too complicated for me. Well done.

  • @lukeellsworth1377
    @lukeellsworth1377 Před 2 lety

    Are those tan window switches I've never seen those I'm going to have to find some of those at the yard to spruce up my tan interior

  • @ramontolentino7952
    @ramontolentino7952 Před rokem +1

    A big suction cup, or two or three small ones, wedged in the bottom of the window opening will hold your window in place without the mess.
    Good vid :)
    Need to know info for my old WJ

  • @Scott00
    @Scott00 Před 2 lety

    When mine failed on the road instead of tape I used a U clamp on the track that I was lucky enough to just randomly have in my tool bag... I'm guessing a small vice grip or any other kind of clamp would work also.

  • @michaelchance9405
    @michaelchance9405 Před 2 lety

    I’ve used WD-40 to get the tape sticky loose and use rubbing alcohol for the residual mung….Good Video, Thanks!!

  • @samdevil6234
    @samdevil6234 Před 6 měsíci

    my WJ brother I Sam the Cannon man say use zippo fluid will take that adhesive off. dab it on with a rag , let it soak , then wipe with a green scouring pad. a huge cannon salute from your Canadian WJ brother!

  • @donwhite3291
    @donwhite3291 Před 7 měsíci

    I like your helpful tips on reinstalling the regulator… my weathershield crumbled in a million pieces… junk yard not a solution… any other fix?

  • @zachhorton2972
    @zachhorton2972 Před 2 lety +5

    Goo gone is the answer

    • @3012630126
      @3012630126 Před rokem

      Scrub with Little bit of Dawn liquid+hot water then wipe dry and put some sort of oil or hair oil (ask a chick)and rub it off with an old cloth. Should ball up like bits chewing gum.

    • @Edwinhernandez-ec4xy
      @Edwinhernandez-ec4xy Před 3 měsíci

      He said he couldn’t find it

  • @danhambrick6331
    @danhambrick6331 Před 2 lety

    Thanks Douglas 👌👍💪

  • @xpure_official
    @xpure_official Před rokem

    Thank you ❤!

  • @matthewlandry5986
    @matthewlandry5986 Před 2 lety

    I had to do a window on my wj I removed the tape mess with turtle wax label and sticker remover works really good 👍but I used a pair of vise grips that held the window up too

  • @t.vaimaona7219
    @t.vaimaona7219 Před rokem

    Love your freestyle illustration and ebonics. SLAMAZON 😂😂😂 SUBED 👍

  • @bruceallen6016
    @bruceallen6016 Před 10 měsíci +2

    Nice fix. 😊 I know WD40 will help immensely when removing window tint. Not sure about that adhesive but worth a try?

  • @chrishartleroad5827
    @chrishartleroad5827 Před 2 lety

    I got a 92 jeep I need to replace both motors windows in my jeep. Does it take the same motor

  • @tylerwilliams786
    @tylerwilliams786 Před 2 lety

    B12 chemtool. Keep bottle on the shelve. Takes any adhesives off quickly,and does great with tint adhesives

  • @ce.nz0
    @ce.nz0 Před 2 lety

    I've had to do a few of these too. They all broke in the same way, the end of the cable snapped the plastic post on the carrier and R-U-N-N-O-F-T. I figured replacements would just break in the same way- So my fix was to drill a hole in the carrier and put a machine screw and nut to hold the cable in place. The hardest part was untangling the slack cable from the motor pulley and getting it tensioned right again.

  • @kylestephenson9265
    @kylestephenson9265 Před 6 měsíci

    How can I put the window back up for now? Just so snow doesn’t get in while I wait on parts

  • @timothyhatcher8673
    @timothyhatcher8673 Před 2 lety

    Acetone work great

  • @francishart6075
    @francishart6075 Před 5 měsíci

    Good morning I have a2002jeep grand Cherokee window won't go up or down how much a job like that would cost?

  • @manbearpig2164
    @manbearpig2164 Před 2 lety +2

    You can actually just leave those metal clips in and push the ball end into it

  • @thefishermanz8349
    @thefishermanz8349 Před 2 lety +2

    Where that hoodie come from its sick

  • @erichughes9098
    @erichughes9098 Před 2 lety

    My cleaner of choice is acetone. 😎👍

  • @sccarguy8242
    @sccarguy8242 Před 2 lety

    The best tape to hold a window up is Blue painters tape. However it works best if you wrap it around the door frame lengthwise (tape on inside window around door frame tape on outside of window). Pulls off easily and without residue.

  • @kevinpinkham8363
    @kevinpinkham8363 Před 2 lety

    I use Zippo fluid to get moderate glue or tape residue off of glass then wipe with water or alcohol. If there are tiny bits left over I use 000 steel wool.

  • @Javelina_Poppers
    @Javelina_Poppers Před rokem

    Best I found for getting rid of tape or sticker adhesive residue is something we all probably have around..........WD-40.
    Spray some on and let set for a bit and spray some on a rag and start going at it and it will loosen and come up easily. Clean up with a little alcohol afterwards.

  • @richardjusticejustusoutdoo8323

    Wd40 for the tape residue.

  • @Alpha515
    @Alpha515 Před 2 lety +1

    Dawn dish soap and a glass scraper. Unless you want to mess with solvent and crap left on your glass, to clean up later. Then use wd40, it dissolves the adhesive or goo be gone. But as a glass cleaner dawn always works and easy clean up.

  • @agamersworld4741
    @agamersworld4741 Před 2 lety

    Literally just did a window regulator assembly on my neighbors car yesterday lol

  • @jaysmith5084
    @jaysmith5084 Před 2 lety

    1999-2004 is WJ 1998 is still of the ZJ variety 😅 Clear tape works best for the glass as I put a strip on the top inside and over the window frame and it holds perfect until you can get a regulator . Also works on Town and Country vans too .

  • @phelandeluna5439
    @phelandeluna5439 Před 2 lety +1

    Goo Gone!

  • @bearallen852
    @bearallen852 Před 2 lety +1

    WD-40 usually gets most adhesives off. Either spray it into a paper towel or directly on the area.

  • @GodSpeedGato
    @GodSpeedGato Před 2 lety

    Wd40 and a razor blade, or a plastic razor blade for painted surfaces and like there of

  • @sebastiandefrancisci6090

    Ron sons lighter fluid works great for adhesive removal and also to remove chewing gum from seats and carpets also takes grease out of clothes the Napter is the same dry cleaner use

  • @matthewtwright84
    @matthewtwright84 Před 2 lety

    I bought a regulator off Amazon and it didn't fit at all. Learned my lesson and bought the next one from rock auto

  • @jrwagner6700
    @jrwagner6700 Před 2 lety

    U should of Used a 2x4 to hold up the window until u got home to fix it works every time I did it more then once

  • @renadennison9922
    @renadennison9922 Před rokem +1

    Not goof off but goo gone. Goof off is for paint, goo gone is for adhesive

  • @iowafox2206
    @iowafox2206 Před 2 lety

    Rule #1 never leave home with out your main toolkit. I learned the hard way just like this once before. Never will I go anywhere with out my toolkit.

  • @tadavis12
    @tadavis12 Před 2 lety

    I’ve often used straight gasoline or kerosene to get adhesives off. Works 80% of the time, every time

  • @tomriley4316
    @tomriley4316 Před 2 lety

    pb blaster try that

  • @angelcdp
    @angelcdp Před měsícem +1

    My kid slammed the car door and the window went off the tracks. This feels beyond me to do but I may try it.

    • @DEInTheGarage
      @DEInTheGarage  Před měsícem

      You got this! Follow this vid and hmu if you run into any issues. My email is dandeoffroad@gmail.com

  • @Jeffnardo62
    @Jeffnardo62 Před 5 měsíci

    Lighter fluid will remove all that glue from the duct tape. Way better than alcohol.

  • @billhart9359
    @billhart9359 Před rokem

    Goo Gone

  • @jame2182
    @jame2182 Před 8 měsíci

    R U N N
    O F T
    oh brother
    Wherefore art thou

  • @Indominus_vein
    @Indominus_vein Před 11 měsíci

    Wd40 helps get duck tape stuff off of windows

  • @mrsfgogo09
    @mrsfgogo09 Před 2 lety

    Spray window cleaner on the window and used razor blade and or use Mr. clean Magic eraser

  • @coltstephens5933
    @coltstephens5933 Před 2 lety

    Dont use tape keep a wood wedge I'm your car so if it happens use that or a screw driver to hold it up

  • @chrishartleroad5827
    @chrishartleroad5827 Před 2 lety

    I would use brake cleaner on the tape

  • @jeffreya1264
    @jeffreya1264 Před 2 lety

    Use a rag and wd40. It will loosen and dissolve adhesive.

  • @daveconnors810
    @daveconnors810 Před 2 lety

    OTO -Quick Degreaser(chemical) or goo-gone

  • @MarkSWest
    @MarkSWest Před rokem

    Usually "always" prepared? Hmmmm.

  • @stevenschulte8074
    @stevenschulte8074 Před 2 lety

    Denatured alcohol will dissolve that residue

  • @fdmackey3666
    @fdmackey3666 Před 2 lety

    I don't know who the mental giant was behind the design of the passenger side regulator but I'm pretty sure I could afford to fix many, if not all of problems, including the passenger side windows of my beater '05 Chevy Colorado 4X4 pickup which take going up and down in what we here the South call "fits" if had had your experience and opened a little "Jeep WJ Windows Fixed Here" shop....Currently both windows are in full "fit mode" and refuse to go down. But back to WJs....I would think it a safe bet if I said I had seen well over a hundred WJs on the road over the years with (usually black) trash bags taped (with 100mph/duct tape) over the gaping passenger side window or windows. Now I strongly suspect I know what the problem was and how it could be fixed.

  • @wyoming8814
    @wyoming8814 Před 2 lety

    Going camping always breaks my vehicles, either my ford seats rip more, my dodge seat regulator passenger side completely explodes (not while camping), or i break myself

  • @21xenomorph
    @21xenomorph Před 2 lety

    Brake fluid on a rag.dont get on paint of course.

  • @romerolewis77
    @romerolewis77 Před 2 lety

    Soapy water in a spray bottle and a fresh razor blade. 👍

  • @alfredoverno9674
    @alfredoverno9674 Před 9 měsíci

    use wd40 to remove glue residue

  • @MajorWeakness
    @MajorWeakness Před 2 lety

    WD40

  • @Sasssssy3257
    @Sasssssy3257 Před rokem

    Goo Gone or Goof Off

  • @mikeshindel8456
    @mikeshindel8456 Před 2 lety +1

    Just go ahead and buy the driver's side now. You'll thank me later.

  • @deelamenia4818
    @deelamenia4818 Před rokem

    Try veggie oil

  • @gsxerallen
    @gsxerallen Před 2 lety

    I use fingernail polish remover Or goof off

  • @larryshonk2724
    @larryshonk2724 Před 4 měsíci

    Finger nail polish remover