Mr Cool Heat Pump Universal Operating at -7F Nice and Warm Inside No need for Natural Gas

Sdílet
Vložit
  • čas přidán 26. 12. 2022
  • All the Items I used to build my system.
    amzn.to/3whjPJ2 Mr. Cool 4/5 Ton outdoor unit with Air Handler and 25ft Lineset
    amzn.to/3wgGeX6 35A Breaker Outdoor Unit
    amzn.to/3ShxokW 15A Breaker Indoor unit
    amzn.to/3pxlhn6 Concrete Anchors
    amzn.to/3T0YoFT Masonry Drill Bit
    amzn.to/3K5AHbs Nylog BLUE thread gasket sealant
    amzn.to/3Kb2YO2 Tube Bender
    amzn.to/3A70ziM Allen Wrench Set
    amzn.to/3wfLtGg Crescent Wrench
    amzn.to/3AIYDi1 Thermostat Wire
    amzn.to/3KmwiRP R410 Manfold Set
    amzn.to/3pvYY0V Ball Valve for Manfold
    amzn.to/3pwjwGx Impact Drill (mine is no longer made but this one will work)
    amzn.to/3T2c4QW 3/8 Pipe Insulation
    amzn.to/3PvnQ3u 3/4 Pipe Insulation
    amzn.to/3pT9NdP Metal Strapping
    amzn.to/3AzvBRI Washable Filter
    amzn.to/3BKrMbR HVAC Tape
    amzn.to/3fkj0K3 Sheet Metal Bending Tool
    amzn.to/3OYiJJH Sheet Metal Cutting Tool
    amzn.to/3r8Qgqk Anemometer

Komentáře • 41

  • @sleepyta
    @sleepyta Před rokem +4

    Been watching Mr Cool videos like a hawk over the last 6 months. Would love to upgrade my unit.

  • @cbsites4127
    @cbsites4127 Před rokem +3

    I'm seeing similar results with my Mr. Cool Universal. Mine is a 2-3 ton version I installed this past spring (cost less than $4000) single fan compressor and this week was my first deep freeze. I just added the A-Coil to my existing 'old Bryant' gas furnace and have a Google Nest thermostat configured in dual fuel to kick the gas heat on at 0. True to colors, it did just that. But even as temps dropped to 0, the compressor unit performed just nicely. I can attest to you, you do not want to stand in front of that condenser fan when it's 3 degrees outside; unless you like frostbite. If you curious, it has a defrost cycle to melt ice and snow on the fins, and it does make some noises when it completes and shifts the reversing valve (going from heating to cooling) to thaw the outside fins. -7 does not surprise me. Anyway Thumbs up to you (and Mr. Cool) and thanks for the video.

  • @dungeonviper2606
    @dungeonviper2606 Před rokem +1

    Have you ever measured the kW for heating and cooling for 1hr? Also, you must have a good sized solar array to pull 38kWh in a day during winter.

  • @araujomike123
    @araujomike123 Před rokem

    What size house do you have to calculate for 4-5 ton and did you mess with the dip switches?

  • @jimmymoye5042
    @jimmymoye5042 Před rokem +1

    For 4 ton, what fuse did you use?

  • @aricp3764
    @aricp3764 Před rokem +1

    Are you running a heat strip. My 2 to 3 t universal is only getting about a 17゚ change from return erhottest I've had at the vents is 87゚

  • @mooch91
    @mooch91 Před rokem

    How often is your unit cycling on and off at these temperatures, and at more moderate temps like 20s and 30s?

  • @philiptrump9590
    @philiptrump9590 Před rokem +1

    cost to heat 38.6kwh or $3.61 , incomplete statement, for how many hours or run time

  • @mtbphil168

    I just installed a 3 ton universal. I noticed it pulls 0.7 amps even when off!! This amounts to $180 a year in wasted energy. Do you know what your current draw is to the outdoor unit when off? Thanks