This is amazing! I bet that string would be even more impressive with the Barracuda 21s. I believe the regulator on my gun just broke in after 2000 plus shots the other day. I'm now getting similar results with the CP. Thanks again for another awesome video!
Very nice , I really like your approach and the fact you take the time to discuss how to go at it without a ton of specialized tools. I’ve tried to duplicate your results and had some difficultly, going to relieve the barrel port, and see what happens. Keep working the gun ‘cause it’s really strong.
Brother you are spot on. Value for dollar...you would be hard pressed to do better for the money. Exceptional guns for the money hands down. I can’t wait to see what the Air Venturi Avenger gives us in .25. So very excited.
Hi there, I did something similar with a at44 long QE using a Audrius regulator set to 115 bar and I follow the advice from some experienced guys from GTA and airgunation I was able to get 70 usable shots inside the regulator pressure around 825 -830 FPS was a almost flat line just amazing.For better accuracy less speed is better around 825 FPS is the max for a 14.3gr and also they help me to understand that to find a better air usage we need to find the “Plato” between Regulator pressure and hammer tension, you are doing a terrific job on this rifle but I think you can get more shots inside the regulator pressure using the same 14.3gr if you decrease the velocity and the air pressure regulator, probably 100 usable shots.
Wow just did my trigger move the screw to last hole much better , also turned 1/4 turn on the regulator wheel all i have to do now is tap the barrel to 3/16 need to get a new drill bit set hope mine turns out as nice as yours Steve.
I think you may need more tins of JSB 15.89s & 18.13 gr. also with H & N baracuda match 21.14 gr.in 553 mm headsize , I’m impressed with the shot count, but I’m excited to see the results on those pellets, I wish I could do what youv’e done on your nova liberty! your’e such a good tinkerer & also for your excellent project on that “magnificent looking riflestock “ you made!
Huh. This is pretty hecking cool. I recommend checking out the ATI Nova Freedom and seeing if you could put on this stock - now *that* would be just awesome!
I think that is one of the best pellets Crosman has. I normally shoot domed pellets but I can't find the Crosman Premier domed ones locally to try so I just stuck with the hollow points. I didn't want to pay freight on one can of pellets.
Nice review. See you have a different scope, what kind is it? You making a new stock for your second gun or you get the wood stock? Thank you for all the good info......... Hey one more question you think this gun would work as a field target gun??
What scope and rings are you using ? Someone else asked about a year ago about the scope change. My dilemma is I can't get the right combination for height and location for eye relief and the loading port access. Putting a scope on an air rifle has more challenges than a firearm.I have purchased two scopes that won't work on my gauntlet or liberty. I like the 44mm lens. One of mine the thickness of the front lens cover housing is just enough it hits the breach block and shroud. It is a UTG 3-12x44 w 30MM tube.Compact Tactical Rifle Scope illuminated.SCP3-UM312AOIEW I thought this would be the berries but too short to get the right movement back and fourth combo with the ring position.Mid height rings calculated right but the front lens cover fitted onto the scope housing doesn't clear the breach block or shroud. With your experience. I figured you may have encountered this problem once or twice yourself. Thank You:
The scope used in the video is the Discovery 6-24 vtt scope with Discovery mid rings. I now use the Discovery 5-30 HD 34mm tube with same rings. I have no problem because of the adjustable stock I made. Now I do have the same problem on my kral puncher jumboit does not have an adjustable cheek piece so I have to use padding with a wrap to get the correct height.when there is no adjustable cheek piece it makes it very difficult to get the correct eye relief and height. I'm now in the process of making an adjustable stock for my kral puncher jumbo
Great job ! What happen with the Crosman baffle u start with ? Any reason suppressor over that? 1 shim 1/4 turn on the reg an barrel port drilled to 3/16 that’s what is working best for u as of now ?
Thank you! I just like my airguns very quiet. This is now more quiet than my Cricket. Both guns are great. I'm just trying something different to see if minimal adjustments works fine too.
Air Velocity Sport right on do what u do brother u good. Reason I’m asking is because I’m trying to clean up a rat problem I got the ATN rocking 3*14 it’s dialed in but I think the liberty might be too loud without a sound suppressant of some kind for these rats
Hello friend, hope you are in best of health. I m planning to buy a Nova liberty ( HP900) in .25 cal. Any suggestion if its Planum size can be increased and will that help in improving power and consistency.??
Hi I’m based in the uk, I’ve got a nova vista alpha in .22, where can I source fill probe o rings, or is there a compatible gun that uses same o rings.... thanks in advance
4350 psi fill does get a lot more shots but from my experience, 3600 psi fill gives you the most consistent shots and I refill when the pressure falls to 2400 psi. Because a max fill seems to affect the velocity a bit as in slower pellet speeds are what I have personally noticed. In the defence of the gun, I have the regulator opened up the whole way and the hammer spring maxed out for pushing slugs at the moment. Currently, if I put a 15.89-grain pellet in the gun and shoot it from 3600 psi fill it will Chrono at 1080 fps but if I fill the gun to 4350 psi the velocity will drop down to the mid 800s...most likely something that I've done and not the guns fault. AVS aka the banker would be more knowledgable on this issue I'm sure. I'm still wet behind the ears in the PCP world and have a lot to learn. But my guess would be my regulator is opened too far to work effectively maybe...I don't know for sure. What I do know for sure is the velocity does start to decrease when my gun gets below 2400 psi currently and when I fill above 3600 psi. Hope this helps you.
I have my Yong Heng compressor coming tomorrow. What kind of hydraulic oil do I need to get ? I'm going to get the dessicant filter system like you have.
#46 hydraulic oil. There is a better good filter that has the bleed valve already installed. It $135 on Amazon. You might be able to get it on AliExpress for less.
Here is the link 30Mpa High Pressure Air Filter External Water-Oil Separator Filtration for Air Compressor Air Pump Scuba Diving www.amazon.com/dp/B077SX5G9V/ref=cm_sw_r_cp_taa_TKpGCbTBMRPGK
Remember, to not over work this little compressor. In the beginning it will fill your tanks fast because the orings are new. Over time as the orings wear it will fill slower. At that point you will have to service the compressor and change the orings. I run it about 20 minutes at time using very cold water.
Got my compressor today. It has a small filter on the fill whip. Do I need to take it off or can I just leave it ? I'm getting the good dessicant filter .
Depending on the pellet you are using, how high you set the regulator and how high you shim the hammer spring you should be able to set high on 980fps with a 18grain and maybe 820fps on low. But each gunnis different and how you set the regulator versus hammer spring will make a big difference. You will have you do trial and error to get it where you want it. Bottom line this gun is very flexible.
@@AirVelocitySport 10-4. I'm just trying to weigh buying marauder or nova mags. Any disadvantages or advantages for either? I was leaning toward whatever is cheaper.
The Nova click in place better than the marauder but the Nova magazines have a problem with the spring half the time. I have 6 Nova magazines and 3 had to be repaired.
@@AirVelocitySport marauder mags it is then :). Thanks for all your videos on this gun. I snagged one for a great deal with zero mags. I fixed the issues with it and want to progress beyond the single shot tray it came with.
Ok.. well I thought of doing something like that to tame the bark down a bit but I didn’t know how it would work with that barrel being counter sunk so far in the shroud ..
Loved the tech and impressed with the consistency over a large range of shots!
This is amazing! I bet that string would be even more impressive with the Barracuda 21s. I believe the regulator on my gun just broke in after 2000 plus shots the other day. I'm now getting similar results with the CP. Thanks again for another awesome video!
Youre just like me man always testing and modding our guns hoping to get the best out of them excellent work buddy keep it up 🖒🖒🖒
It's both a sickness and outlet. Sometimes 5 hours can pass and I thought I was working for an hour. Thanks from fellow tinkerer
Very nice , I really like your approach and the fact you take the time to discuss how to go at it without a ton of specialized tools. I’ve tried to duplicate your results and had some difficultly, going to relieve the barrel port, and see what happens. Keep working the gun ‘cause it’s really strong.
You are awesome. I have messaged a couple of other guys and they never message back. I love your videos. Keep up the good work.
Thank you! Glad i helped
What size batteries does the thermometer take ? I don't see the size anywhere.
Not sure, but look on the back of the battery it will read something like LR44
They are lr44. Thanks.
Wow the regulator is doing a fine job.shot count is incredible specially from a cylinder gun.
That's pretty impressive!
Wish they sold them in the Netherlands.
Brother you are spot on. Value for dollar...you would be hard pressed to do better for the money. Exceptional guns for the money hands down. I can’t wait to see what the Air Venturi Avenger gives us in .25. So very excited.
Hi there, I did something similar with a at44 long QE using a Audrius regulator set to 115 bar and I follow the advice from some experienced guys from GTA and airgunation I was able to get 70 usable shots inside the regulator pressure around 825 -830 FPS was a almost flat line just amazing.For better accuracy less speed is better around 825 FPS is the max for a 14.3gr and also they help me to understand that to find a better air usage we need to find the “Plato” between Regulator pressure and hammer tension, you are doing a terrific job on this rifle but I think you can get more shots inside the regulator pressure using the same 14.3gr if you decrease the velocity and the air pressure regulator, probably 100 usable shots.
Wow just did my trigger move the screw to last hole much better , also turned 1/4 turn on the regulator wheel all i have to do now is tap the barrel to 3/16 need to get a new drill bit set hope mine turns out as nice as yours Steve.
Eventually, you may want to contact Duy (GTA name DarkCharisma) to have a power adjuster and transfer port enlarged.
V v nice consistency
I think you may need more tins of JSB 15.89s & 18.13 gr. also with H & N baracuda match 21.14 gr.in 553 mm headsize , I’m impressed with the shot count, but I’m excited to see the results on those pellets, I wish I could do what youv’e done on your nova liberty! your’e such a good tinkerer & also for your excellent project on that “magnificent looking riflestock “ you made!
Great video :-) you have two, now the wife and I are goin to have to find us ours to tinker with lol..
Huh. This is pretty hecking cool. I recommend checking out the ATI Nova Freedom and seeing if you could put on this stock - now *that* would be just awesome!
I think that is one of the best pellets Crosman has. I normally shoot domed pellets but I can't find the Crosman Premier domed ones locally to try so I just stuck with the hollow points. I didn't want to pay freight on one can of pellets.
Nice review. See you have a different scope, what kind is it? You making a new stock for your second gun or you get the wood stock? Thank you for all the good info......... Hey one more question you think this gun would work as a field target gun??
What scope and rings are you using ? Someone else asked about a year ago about the scope change. My dilemma is I can't get the right combination for height and location for eye relief and the loading port access. Putting a scope on an air rifle has more challenges than a firearm.I have purchased two scopes that won't work on my gauntlet or liberty. I like the 44mm lens. One of mine the thickness of the front lens cover housing is just enough it hits the breach block and shroud. It is a UTG 3-12x44 w 30MM tube.Compact Tactical Rifle Scope illuminated.SCP3-UM312AOIEW I thought this would be the berries but too short to get the right movement back and fourth combo with the ring position.Mid height rings calculated right but the front lens cover fitted onto the scope housing doesn't clear the breach block or shroud. With your experience. I figured you may have encountered this problem once or twice yourself.
Thank You:
The scope used in the video is the Discovery 6-24 vtt scope with Discovery mid rings. I now use the Discovery 5-30 HD 34mm tube with same rings. I have no problem because of the adjustable stock I made. Now I do have the same problem on my kral puncher jumboit does not have an adjustable cheek piece so I have to use padding with a wrap to get the correct height.when there is no adjustable cheek piece it makes it very difficult to get the correct eye relief and height. I'm now in the process of making an adjustable stock for my kral puncher jumbo
Have you tried on chrony with the heavier H & N baracuda match 21.14s & JSB 18 .13 gr.?
Not yet, I have burnt so many tins of barracuda and jsb that I'm trying to be careful. But I will eventually. I'm sick that way
Great job ! What happen with the Crosman baffle u start with ? Any reason suppressor over that? 1 shim 1/4 turn on the reg an barrel port drilled to 3/16 that’s what is working best for u as of now ?
Thank you! I just like my airguns very quiet. This is now more quiet than my Cricket. Both guns are great. I'm just trying something different to see if minimal adjustments works fine too.
Air Velocity Sport right on do what u do brother u good. Reason I’m asking is because I’m trying to clean up a rat problem I got the ATN rocking 3*14 it’s dialed in but I think the liberty might be too loud without a sound suppressant of some kind for these rats
Will that synthetic oil be good ? It's #46 hydraulic oil.
Hello friend, hope you are in best of health. I m planning to buy a Nova liberty ( HP900) in .25 cal. Any suggestion if its Planum size can be increased and will that help in improving power and consistency.??
Hi I’m based in the uk, I’ve got a nova vista alpha in .22, where can I source fill probe o rings, or is there a compatible gun that uses same o rings.... thanks in advance
Captain oring online has orings for alpha but it's under the name Liberty. Not sure about a fill probe
R U leaving enough time between shots to let the regulator time to settle.
10 seconds between shots
70 shots from 3600 psi! That is awesome!! I wonder how many you'd get from a 300bar fill🤔
Probably another 29 shots. 52 addition bar divided 1.8 bar per shot is 29 shots. 100 shots from 300 bar at 29fpe
Have u tried crosman premiers for accuracy? Mine just did not like them
No, but I've heard from many people that they are not good.
4350 psi fill does get a lot more shots but from my experience, 3600 psi fill gives you the most consistent shots and I refill when the pressure falls to 2400 psi. Because a max fill seems to affect the velocity a bit as in slower pellet speeds are what I have personally noticed. In the defence of the gun, I have the regulator opened up the whole way and the hammer spring maxed out for pushing slugs at the moment. Currently, if I put a 15.89-grain pellet in the gun and shoot it from 3600 psi fill it will Chrono at 1080 fps but if I fill the gun to 4350 psi the velocity will drop down to the mid 800s...most likely something that I've done and not the guns fault. AVS aka the banker would be more knowledgable on this issue I'm sure. I'm still wet behind the ears in the PCP world and have a lot to learn. But my guess would be my regulator is opened too far to work effectively maybe...I don't know for sure. What I do know for sure is the velocity does start to decrease when my gun gets below 2400 psi currently and when I fill above 3600 psi. Hope this helps you.
Can u do a review off that discovery scope plz
Once I've gotten a chance to really put it through it's paces I will do a review of this scope and others.
I have my Yong Heng compressor coming tomorrow. What kind of hydraulic oil do I need to get ? I'm going to get the dessicant filter system like you have.
#46 hydraulic oil. There is a better good filter that has the bleed valve already installed. It $135 on Amazon. You might be able to get it on AliExpress for less.
Here is the link 30Mpa High Pressure Air Filter External Water-Oil Separator Filtration for Air Compressor Air Pump Scuba Diving www.amazon.com/dp/B077SX5G9V/ref=cm_sw_r_cp_taa_TKpGCbTBMRPGK
Remember, to not over work this little compressor. In the beginning it will fill your tanks fast because the orings are new. Over time as the orings wear it will fill slower. At that point you will have to service the compressor and change the orings. I run it about 20 minutes at time using very cold water.
Thanks so much for your help. I won't be using it a whole lot. I have the Pitbull 25 caliber and a gauntlet 22. I get quite a few shots out of them.
Got my compressor today. It has a small filter on the fill whip. Do I need to take it off or can I just leave it ? I'm getting the good dessicant filter .
Did you change the suppressor configuration ? It looks slightly different than the first gun.
Yes. This shroud extension is made from my old Kral Puncher Jumbo shroud that was broken.
Kindly also mantion priz of this air rifle.
I like your videos a lot I have a air rifle that I need some help with on the accuracy and performance get at me asap
Hi
Can I set 900fps at L point in this gun
And what fps I can get on high H point
Is it right ?
Depending on the pellet you are using, how high you set the regulator and how high you shim the hammer spring you should be able to set high on 980fps with a 18grain and maybe 820fps on low. But each gunnis different and how you set the regulator versus hammer spring will make a big difference. You will have you do trial and error to get it where you want it. Bottom line this gun is very flexible.
What brand magazines are you using?
Both the Nova and the marauder
@@AirVelocitySport 10-4. I'm just trying to weigh buying marauder or nova mags. Any disadvantages or advantages for either? I was leaning toward whatever is cheaper.
The Nova click in place better than the marauder but the Nova magazines have a problem with the spring half the time. I have 6 Nova magazines and 3 had to be repaired.
@@AirVelocitySport marauder mags it is then :). Thanks for all your videos on this gun. I snagged one for a great deal with zero mags. I fixed the issues with it and want to progress beyond the single shot tray it came with.
800 FPS with the 14.3s is enough for hunting so you were probably looking at close to 100 usable shots or more.
Yes, if I lower the regulator to 1900 psi with no shim maybe even lighter hammer spring too.
Did you build your own supperssor ..?
Yes, the shroud extension is from Kral jumbo broke shroud.
Oh gotcha
I remember you had issues on your kral.. I’m guessing you made the supperssor like on your 2240 but shorter
@@brianjones8048 yes exactly
Ok.. well I thought of doing something like that to tame the bark down a bit but I didn’t know how it would work with that barrel being counter sunk so far in the shroud ..