XBOX ONE S Controller Buttons Installation Guide by eXtremeRate
Vložit
- čas přidán 30. 05. 2020
- Tutorial video of how to install Xbox One S controller buttons.
Shop Links:
Amazon US: amzn.to/3FaX90S
Amazon CA: amzn.to/3HlDv56
Amazon MX: amzn.to/3FAyNir
Amazon DE: amzn.to/3iMZVSe
Amazon UK: amzn.to/3VHbdpI
Amazon FR: amzn.to/3UEcxso
Amazon IT: amzn.to/3uwpSsb
Amazon ES: amzn.to/3Fe7Nnl
Amazon AU: amzn.to/3Y93xy8
eXtremeRate.com: extremerate.com/SXOJ0206
Aliexpress: bit.ly/3UIdFuO
eBay: ebay.to/3VIeoNW - Hry
This tutorial video deserves million views because he show’s 1by1 how to do it clearly
Thank you so much!!!
Are you both hacking for no reason
instablaster
Not really
🐐🐐🐐
I customised my first controller today and thanks to this video i succeeded!
Super easy to follow through all the steps, even without commentary.
So i just wanna say thank you for the help!
YES THIS IS THE CONTROLLER I HAVE thank you so much for having a tutorial that isn’t just seriesX
This was super easy to follow! The trickiest parts were definitely taking the grips off and making sure that I got the first circuit board you remove back in correctly. The rest of it is pretty difficult to mess up--the buttons only go in one way. My controller looks great now and still works perfectly, thank you!
Glad to know that! :D
It worked for an X1 controller, too -- thanks for your walkthrough. It was really well done!
Man gotta say your tutorials went from like a 6 ish to like 1000 like love um so much there so easy to follow
Thank you very much!!
I bought y'all's replacement buttons in chrome red. Happy to say there amazing
I even watched this tutorial, icant wait to buy from yall again.
Thank you so much!!!
@@ExtremeRate no, thank you!! ✨
Thank you for tutorial it helps me alot :)
This is such a great product thx!
Best vid ever, thank you
Wanted to say thank you all for making the replacement side panels for the V1 Elite! I had 3 dead and useless V1 Elites (1 bought, 1 obtained as a gift, and 1 that was sent to me as a "Goodwill replacement" from Micro$oft). All 3 lasted 4-8 months before developing the same issues (Peeling grips on the side panels due to the garbo adhesive M$ used in manufacturing, and a couple of broken shoulder buttons due to garbo design).
It cost $60 to buy 3 sets of side panels, but they're a remarkably close match to the originals. $20 for a Systhetix replacement bumper kit (Includes 2 bumper pieces), and I now have 3 V1 Elites that look either brand new or pretty good (One had an inner grip issue on one side that was bad enough that the grip had to be trimmed down with an Xacto, since the rubber stretches when the adhesive fails), the others just needed to be carefully re-bonded where there was some minor lifting.
I spent a year and then some in limbo. The few indy shops left wouldn't touch them since they couldn't get OEM (Or for a while, any) parts. M$ wouldn't even repair a V1, I offered to pay them to repair or replace the damaged units. They weren't interested. I guess they were saving the last of their refurb stock for warranty and "Goodwill" replacements. Replacement out of warranty = "Lulz!" once the V2 came out. My request to buy the OEM parts and fix them myself was met with something akin to a "Get bent!" by M$. I mean, how dare anyone have expectations about design and manufacturing defects after stuffing $300+ into their pockets for a couple of controllers. 🤣🤣🤣
So far so good after 6 months of use on one of the repaired controllers! I'll continue to monitor the inner grip area, as a new shell with the inner grips is now $50 on Amazon, and at that point probably not worth replacement after already spending $30 on each controller to get them functional and looking pretty good again.
So THANK YOU for making these much needed replacement parts. I'm amazed you were able to get the rubber grip texture and color so close to the original parts! Including the needed tools and uploading videos like this
HUGE thanks and thumbs up for you on behalf of all Elite V1 owners who had problems with peeling grips on their controllers! 👍👍
(Now let the comments from the owners who used their Elites 40 hours a week for 5 years and never had an issue step forth, insisting that I must have thrown my controllers off a skyscraper, pissed on them while in a drunken stupor, doused them in gasoline and set them on fire, drop kicked them into the nearest wall and torn off the grips in a fit of rage, or otherwise abused them, since their own lack of problems conclusively proves there were no design or manufacturing issues with these units. 🙄👍😂 'Cause after all, for-profit companies are absolutely in the habit of sending out replacement units for originals that are out of (The absurdly short) warranty when they've done nothing wrong in design and manufacture. Shame it didn't save them, apparently there were more than enough pissed off V1 owners to finally get a class action lawsuit against M$ going... 😂)
Thanks for such a long comment bro, you are rich of humor and you told the truth. MS made bad Elite V1 and even worse on V2. The controllers are good but the quality just not worth the price. We are very happy to help the V1 owners out, you know we takes a lot of time on the texture and the color of the grips, just want to make it looks like the original, but with better quality :D
I bought the Weeds face plate for 16$ on amazon, along with some blacked out buttons and your guys's rubber grips with the plastic. Also got the extremerate interchangeable dpads and thumbsticks.
Wow you really helped me out a lot. Step by step!
You are most welcome!
Got the NES housing for my new controller. This helped me know how to install the ABXY buttons
Glad to know that :)
Thank you my controller looks awesome and this video really really really really really helped
Congrats!!!
finally some one who shows everything i am subscribing
lol
Nice video thanx 👍
Glad you liked it
Por fin encontré un excelente tutorial sin desoldar los motores❤
Thank the Lord for this guy. I am getting a wwll plate set. And getting bullets buttons and joystick
Awesome match!!!
That is such a beautiful blue, sadly I don't won't to install it myself.
Nice video
Thank you, so useful that you tell us what size screwdrivers you need, thanks
You are welcome
Thank You so Much!!!
You're welcome!
Thank you so much this will be very useful as I just broke 2 controllers in one day playing Elden Ring.
I dropped my shock blue controller on the LB button and now its broken and jammed in. As for my grey controller the x button sometimes gets jammed in but doesnt register when I click the button. The last time I had this issue was on my first xbox one controller, I had spilled beer in it and with the dust/dirt in the controller the buttons would not make contact effectively, a simple cleaning fixed that issue hopefully thats the same issue on the grey controller and nothing too serious.
As for the shock blue controller as much as I want to fix it I think it still has warranty as I literally bought it at the end of last year around christmas.
I have a feeling none of your sht works because you are constantly hurling it around the room like a man child.
Do you need to go thru all of the above just to change out the abxy buttons?
Hi my bumpers of my xbox one s controller feel very loose and make a cruncy noice when pressing them whats the cause and do i need to replace the bumpers
Cool that exremerate answers to comments. That's what I call service
Sure :)
Welp you guys saved me. I have an Xbox one s controller and it is my favorite controller. Everything about it is perfect to me. Unfortunately while I was gaming suddenly the right bumper broke. I have the new Xbox series x controller and the elite series 2 controller but I despise both of them, as they just don't feel the same at the Xbox one s controller, the buttons are mushy and the d-pad is atrocious. The series S controller is in my opinion the best controller.
Long story short, I found you guys on amazon and the specific color in this video stood out to me and I bought that exact set, as well as chrome red. (Bc I want the chrome red on the bumpers and triggers but blue/purple on the buttons) I then got a galaxy painted front plate and some purple aluminum joysticks. I think the purple/blue buttons with the galaxy faceplate will look absolutely perfect! (I didn't really save any money bc I went all out and ordered a rediculous amount of custom parts for the broken controller...) But you guys did save me from having to buy another bland generic disgusting Xbox series X controller. Especially since they no longer make the series S controller, except for the hilariously overpriced urban camo ones... (Which I think are only sold till stock runs out).
I plan to keep that series S controller working till the day I die and I appreciate you guys allowing me to keep it alive and in STYLE. :)
Thank You.
Glad to know your story! I personally prefer the ONE S controller to the XSX or Elite 2 controller too (but I mod it with our back buttons kit), the size of the ONE S controller is just perfect. And I'm pleased to tell you that the quality of the electronics part of the ONE S controller is really good. If you don't drop it in the water it can work like forever. The only problem is the thumbsticks, they will drift one day, but you can replace them :D
@@ExtremeRate Well, the kit came in and everything went mostly as planned!... I say mostly because I had some serious issues with the B button.... It just wouldn't depress normally and after assembling and then disassembling 3 times I figured out that the issue is the black and gray wires that lead to the right trigger vibrator somehow got in between the B button and the rubber contact to the board. drove me crazy. BUT now that that issue is solved, The controller works great and looks amazing!
I'm currently telling all my gamer friends about your products so THANK YOU!
also, do you guys offer a tutorial/product for replacing the thumb sticks when they fail? Mine are starting to drift but given that the only games I play with a controller are Rocket League and a few Single Player games, i'm not too worried about the sticks yet.
@@manofwill2468 Glad to know that bro! And for the tutorial on replacing the thumbstick mould, please refer to this video, it's professional czcams.com/video/Uoxz0oHX9TE/video.html
Hey do you guys know if the series x controller back housing fits in the xbox one s model?
Finally a tutorial without needing to use soldering iron to take the controller apart. Does the battery sticker come off that easily or is it suggested to use some heat?
I was able to peel it off using the separating tool they include in the kit.
is this just to change the color or it is also clicky?
I’m a 15 year old girl and I didn’t think I’d be able to manage but this was honestly so helpful thank you so much my controller looks so cuuuuttteeee you guys are amazing
Thank you and great to know that you made it! :)
@Henry Simpson and no one gives a fuck about your comment
@Henry Simpson i ain’t no simp I just don’t like simpletons like you the cuss for everything
@Henry Simpson never said that
You guys should add matching thumb sticks it would really help to have a consistent setup also it would be cool if you guys also sold back plates that have grip on it like regular xbox one controllers
Thanks for your suggestion!
ExtremeRate The parts were in perfect condition and the installation was simple because of this video👍
@@karinavalencia8522 Thank you! :D
I got everything except when I got my bumpers put on the left one will not move unless I hold down the trigger. Please help 😔
Love this! Would this fix sticky buttons? Wanna try make my xbox one controller work a little better cause all the series X controllers I get are broken out of the box for me. My luck is trash 😅
It depends on how does it stick. I suggest you replace the rubber pad under the ABXY buttons at the same time if your controller was heavy used. Good luck!! :D
Hello xtremerate I know it says that this mod does not work on the series 2 elite controller, but would the abxy face buttons fit into the series 2? I have a faceplate of yours and it is great! I have been using it for like a year and a half!
YES!!! But if you need the whole button set for the series 2, you can wait for about a month, they are coming!! :D
@@ExtremeRate oh let’s go I’ll definitely wait!
@@kingbingus9825 :D
Could you do a video on how to reshell a Xbox series x controller? I want to buy your front housing shell and do my controller pink but I’m afraid I’ll mess it up!
We already have it! czcams.com/video/46g8h8toba4/video.html
question, will alternative xbox 360 controller buttons (A,B,X,Y) work on an Xbox one S controller?
We haven't tested it but seems not.
Hello I am wondering if you guys are doing any plain xbox one X controller shells so we can try spray-paint them ourselves? thanks :D
Hi, do you mean the Xbox One S controller? Or the Series X controller?
I'm pretty sure they have white ones
@@wolfiez3773 He means plain white without any paints on the shell, so he can draw/paint on it :)
can the conductive rubber of buttons of xbox one s controller be replaced by conductive rubber of xbox one controller (from the normal xbox controller)?
I'm having difficulty to search for the s one replacement in my country
They are not the same, please check this link www.aliexpress.com/item/4001249766873.html
Thx man all of the buttons fell out ima have a fun time to reassemble my controller
... Is it a real thx?
Background music??
Do any of these parts work with the elite series 2? Obviously the dpad does not and will there be a set like this but for the elite series 2?
The shoulder buttons are not the same. Our series 2 buttons pack is coming, please stay tuned (not included dpad of course)
Ok thanks
+1 subscriber
Thanks
i have it installed but the trigger is pulling on the bumper
Hey Extreme rate, I love your work and want to submit a custom design back and front plate that a friend if me can make.
The design can be used by your company for futher use if possible from both parties.
I really hope your able and willing to react on this!
Hi, could you please describe the design in your mind?
@@ExtremeRate you should really make a replacement for a Minecraft pig controller
@@gentleflipper3536 That may infringe copy right lol
@@ExtremeRate it would still be cool besides you’d make them better then the Microsoft let’s be honest
@@gentleflipper3536 Maybe we will think about some pixel designs creat by ourselves
Opened my controller to fix the A button and found the little rubber thing was missing the thing in the middle for the A button. I have no idea how it just disappeared inside my controller
God tier video, also for anyone who’s having RT issues where the rt keeps pressing reset the console. I spent like a hour tryna figure out why it was bugged but after hard resetting the console it fixed the issue
Thanks for your tips!
@@ExtremeRate No problem! and thank you for the video!
Okay so im following through this and i got to the lil wire at 6:37 and that bugger will not come off? I dont want to brute force it but how the heck did you get that off so nonchalant
You can just pry it off with your fingernail or the prying tool. Some of them may sit too tight but still can take off.
What's the stand used in the beginning of the video?
The controller stand, but we did not put it on sale because we found that the design is similar with other company's idea which was copyrighted.
@ExtremeRate is it possible to put ps4 buttons in the xbox one controller ?
No
Hi I have a question, the screws to get to the button (A, B, X, Y) are they a T6 or T6H
T6
@@ExtremeRate thank you
@@daniellomeli5817 You are welcome
Why all ps4 remap kits aren’t available for purchase? my remap kit broke and I wanted a new one, and in all online purchase centers its sold out?😢 are you working on a new project?
It just out of stock temporarily, please wait a couples of days
my wireless connection doesn’t work anymore after this. i’m not sure what i did wrong
would the buttons and dpad fit on the standard xbox one controller?
Only the View Menu, Dpad and ABXY yes
Got my replacement parts, installed it. The video is amazing. But now my left analog does not work, it is constantly stuck going left and down. I can’t figure out what happened.
Any tips?
I am having the same issue and I can’t find the answer anywhere. Any luck?
Hello I'm very upset today I enjoy watching your videos, my controller is giving up on the L3 stick, not working I'm not sure what to do I'm afraid I might break it
What's the problem exactly? Do you mean it does not allow you to press/click it down? Or it does not react?
@@ExtremeRate so what's the issue with the controller is when I click the L3 stick it'll be ok for a moment but then sometimes stop working when running in cod of course I can move perfectly fine but the clicking isn't working as it should... So say if I click the stick to sprint but if (x2) to tact sprint works like 1/4 the time...
@@neitomu Please check if there is any dirt or something under the L3 tact switch
Yes I did fixed it by using a tiny suction vacuum and it works now heh go figure
@@neitomu That's great!
Can you make a tutorial for turning the white one to the black version as well
What do you mean exactly?
@@ExtremeRate I think he means turning a white case to a black one
@@kuhlius_2k735 Oh so we also have a video showing how tho swap the front and back shell czcams.com/video/smrbtaSJa9A/video.html
How do I replace the trigger when the vibration motor fall out?
Do you mean the motors fall off when you install the triggers?
great tutorial even though i accidentally messed up my controller while doing this and now it wont turn on lol
oh... If you did not break anything, you still can make it work again by reassemble it correctly...
Can't attach the ribbon cable again, any suggestions?
Just put the wire on top of the circular connector and push down till you here a click and it is fully held on there
Will these work on an enhanced controller??
No, only for official One S controller
Idea: I feel like you guys should make a service to do the modifications for people who feel like they might break their controller while doing it..... just an idea, I’m not your boss 😂
You are not the first one to ask us to do this :D
ExtremeRate noice 😂
@@barwitamop We think this kind of service is a challenge which we may mess the things up. So we are going to open up a modded controller project (keep it in your mind coz it still undisclosed :))
ExtremeRate So it’ll be like a pre customized controller kind of thing?
@@barwitamop yea
Maybe I just thought I wanted to completely reshell my entire controller a seems like a lot of work
emmm, like 2 hours
I tried to do this, and now none of my buttons work except B 😞
My left trigger seems to be up higher did i mess something up for should this be fixable somehow???
How's that higher?
@@ExtremeRate not sure but you can see a gap on the left side thats not on the right. It still works just fine just looks a little odd. Im going to take it apart and redo it again tomorrow
@@brianberg225 Ok, please keep us updated
@@ExtremeRate easy fix lol apparently didnt tighten the screw up all the way??? 🤷
@@brianberg225 Great :)
Well, I ended up messing up my controller even more... Only do this if you’re good at repairing things.
If you follow the video step by step, then you may finish it finally.
I’m a 15 year old girl and I managed perfectly
where can I buy the screwdriver kit?
The screwdriver included in the buttons kit
@@ExtremeRate Ah ok thank you for the info my friend
@@Voloji You are most welcome!
Mine does not open that easily wtf
What if your controller doesn’t turn on after you did this
Then there must be something wrong during the installation. The Xbox controller is very durable, it's hard to damage it when installing the buttons. So if that happens, just watch the video again and re-do the installation.
so i cant install them on my classic xbox one controller?
No, only on Xbox One S controller
@@ExtremeRate but can i buy this for a regular xbox one controller?
@@griuz667 Please check this www.ebay.com/itm/Full-Button-Sets-Replacement-Part-for-Microsoft-Xbox-One-Controller-Chrome-Solid/282153155470?hash=item41b1a37b8e:g:M4wAAOSwVJhZVG6A
Is it just me or does the mother board ribbon just not want to snap into place 😭😭😭
Gosh it’s so much screws to get the damn buttons out
I broke the yellow tape did this effect my controller?!?!?!
No, just stick it on its place
@@ExtremeRate ok thank you I kinda got scared for a sec
@@dryft4343 You are welcome :)
Does it come with torx screwdriver
Yes
@@ExtremeRate ok thx
@@Rxspectify You are welcome
Now my controller won't turn on :/
Please try to use the USB cable to test, if it can turn on in this way, then please check if the metal plates in the battery tray was installed correctly
6:46 caused me to break my controller
F
How's that happen?
Entrée tanne
Thanks my left bumper broke
You are welcome
@@ExtremeRate hahaha
16:00 I can’t get this part to go. It’s the only thing holding me up.
That part was a struggle for me too, Just got to wiggle it around a bit. Once its in place make sure your bumpers still click like usual.
@@talon1802 I can get it to look good, but they don’t click. If I take the middle section off they’ll click but it won’t sit right without it, I’ve given up for the moment.
@@Jetanium for me it was easier to put it together than attach the middle bit.
Try looking for the button your bumbers click. Its weird to explain but you need the bumpers to go under not over a line of plastic in order to click the buttons.
Sorry if that makes no sense, I hope you figure it out.
Put the bumpers first and then after your done with that put in the middle part. Try and it align it with the charger port first and then push up and connect it. That’s what i do. Hope this helps
Thx u hav f**ked up my controller
What's the problem exactly?
@@ExtremeRate my triggers don’t work
@@d4ve7321 Are they stuck?
Need chameleon orange
:)
@@ExtremeRate would be the finishing touch for my Xbox one controller
@@xandercaswell8984 Do you have a pic showing the result of chameleon orange?
I do have an image but don't know how to attach it here🙄
@@xandercaswell8984 If it's a link then you can share it herer
I prefer Xbox controllers, but they are a pain in the ass to disassemble compared to playstation controllers.
Yes that's truth
I can't click on the links😏
You can now :P
Jesus and God love you all
The controller doesnt even turn on.i followed through everything, And the buttons dont even work. 0/10
Please check if all the parts installed correctly. Something like the battery metal plates went through to the battery tray, or something other minor faults during the installation.
lmao YOU def effed up. I replace my buttons/shells all the time and nothing ever happens
Overpriced.