ModFreakz® - Xbox One Model 1708 Button Installation

This video will show you the step by step process of installing the new Model 1708 button sets into your controller.
If this video assisted you please feel free to follow our channel as well as Like, Share and Comment on this tutorial. We will respond to any question you may have.
****************************
SOCIAL MEDIA
Facebook: / modfreakz
Twitter: / modfreakzgaming
Instagram: / modfreakz
Pintrest: / modfreakz
****************************
CONTACT US
modfreakz.com
[e-mail]
****************************
We are always happy to answer your questions. - ModFreakz®

[@mrowqa]

Thanks! I referred to your video a couple of times when assembling my controller back after cleaning the buttons. It was really helpful!

[@williamw3729]

Legend brother thank you i couldnt for the life of me figure out how to put the sync button back in so i left it out for a while but the Lb/Rb bumpers were unusable but when i watched this video my controller is back to normal thank you so much brother

[@TheMrDeathbiker]

THANKS!!!!!
doing this right . now (10-7-19 ) man thanks .
so much for this video now i can mod all 4 of my controllers !!!

[@sulaynon3127]

I'm not gonna lie dude but I love u dont know u but love u u saved a part of my life from going to ashes with this vid

[@joaosilva9441]

Thank you. It help me a lot

[@alanjagroop1282]

Could u use xbox 360 controller parts to repair the xbox one 1708 controler. Like the motherboard haptic motors etc. That can work to repair the xbox one 1708 controller

[@OugaBoogaShockwave]

looks really nice but without xyba button letters it would be confusing for me.
otherwise the gold with black is very nice

[@darrenhughes3761]

When you forgot to put those springs down it messed me up lots as I had to take it all apart again as they wouldn’t go down

[@nathanaelduffy631]

After following this tutorial for some reason my home button isn’t working as it should, sometimes by holding the button down I get a light but it doesn’t flash like it usually would when it is first powering up and connecting to the Xbox one. I’m not sure where I’ve messed up but any ideas how to fix this?

[@JoshuaNightingale]

Sounds as if the shell was not placed back on correctly or something was not lined up correctly. I would take it back apart and examine it.

[@mrtraver]

Does anyone know a way to reconnect the wire between the boards when the receiving socket is damaged? My wire will not snap on.

[@silverbullet7594]

Go on eBay and buy the model 1708 model motherboard do not get the Xbox elite motherboard I was only able to buy the motherboard on eBay after mine broke as well

[@lewistaylor5809]

I am looking every were for those bumpers please were did u order them from ?

[@silverbullet7594]

Amazon look up “gold Xbox one controller buttons”

[@sm0ntes]

if the sync button is not hitting and stays down what would you suggest?

[@silverbullet7594]

Re-adjust the motherboard and see if That fixes it

[@sheluvvenus9040]

What screw driver do I need for the screws

[@ethanramirez9713]

T8 and T6

[@InfinityOnHighx1]

Hey man I hope you respond. At 4:45 with the wire, the pin thing that snaps onto the board, it ripped off with the pin and it’s stuck in it on my controller. Do you think I can solder that on the board and it’ll still work?

[@silverbullet7594]

Yes it should still work if you soder them on correctly but if not go to Amazon for the button motherboard and eBay will have the analog stick motherboard

[@cheezyrat9494]

What type of security screw do I need

[@_adam0777]

Cheezy Rat t6 but you don’t need a Security screw i take it apart without one

[@cheezyrat9494]

Ok thank you

[@Bergomoldo]

по нашему это "харыпский вариант" называется )))

[@sergiojetro4522]

When I push left mushroom-button it goes little more inside carcase then right one, but when I pull it UP to Me - it is really pulls up. Does it right ? When I play platformers, sometimes, even offten it seams, when i push mushroom grip to righ and pull it righ away The main gameplay character rotate itself to left side permanently. Does it righ ? Sorry for my English. How to fix it , or does it could be fixed ? I never dissamble the gamepad before.

[@eddiehammond2819]

Analog stick, joystick, or simply stick is much better term than mushroom button, but as for your problem, your analogs aren't pushed in all the way. If you've replaced them with new ones they're going to be firm and need to be pressed in. Although if you're having a calibration issue with one of the sticks, you'll be better off replacing the controller as fixing the analogs requires a bit of soldering skill.

[@sergiojetro4522]

​@@eddiehammond2819 I fixed my problem by purchasing Gamesir T4, it is much more better then xbox one controller

[@spy97_]

26:09 don't mind me