Harley Davidson Fatboy - New LED Headlight and Turn Signals
Vložit
- čas přidán 29. 04. 2019
- Installing LX-Light LED headlight and turn signals on 2015 Harley Davidson Softail Fatboy.
LED Headlight (without the passing lights):
www.amazon.com/dp/B01B37739O
NOTE: The adapter bracket is only needed for the bikes that use 6 screws to attach the headlight. If you have a newer bike and the headlight bracket has 3 screws, you will not need the adapter bracket.
Front LED turn signals:
www.amazon.com/dp/B07FMVWD3P
Rear LED turn signals:
www.amazon.com/dp/B07G5YMYQX
LX-Light Amazon store:
www.amazon.com/stores/node/14...
Congratulations on changing the headlight, you have made an excellent choice.
Thanks! I like it a lot. It's holding-up well and so much brighter then the stock headlight.
All of those Chinese Daymaker knock off headlights have that plug issue. You did good with the tape, no problem.
Use Dielectric Grease on the connections.
Good Video Tx, will try on my 17 Fatboy ,so 1157 for front and 1156 for rear right ? Where did you get front smoke and rear red covers ...?
Thanks!
Right, the front has running lights. I got the lenses from amazon too:www.amazon.com/gp/product/B076HN6884
www.amazon.com/gp/product/B07G712QQ7
Also, fyi I got this hyperflash. Not a big issue but something to consider: czcams.com/video/yHAFGPEz93k/video.html
The prongs on the light might be a bit too long. Grind off 1/8" and it should plug in all the way.
Good point. I may give that a try. Thanks
Where did you get your turn signals from, also the rears? I like those switch backs.
Hi, check out the links in the video description.
@@UrbanMasterExperiment okay thanks, are those lights halo or led? And if LED are those lights considered to be a white Led?
Hi, they are LED no halos in the back. I think they are red but I also have red lenses. LED and halos are in the front only.
Before instaling the headlight i got error on BCM, b2132 and b2137, my fatboy is 2017, u have change something or u got that error too?
Did you get those codes before the headlight upgrade? Those error codes usually indicate an electrical issue with the headlight, like maybe an electrical short. Start with inspection of all the wires and the plug.
@@dimitry7500 sorry is after i have installed the headlight i won that 2 errors, intaled the headlight and run the bike for 10 miles then the errors appeared
Hello good afternoon, very good your video, but you could have mentioned the size of the headlight .
Thanks! The headlight is 7 inches.
What's the part number of the head light you used???
Hi here is the link:
www.amazon.com/dp/B01B37739O (without the passing lights)
I also have a Fat Boy and this shows the passing lamps included. Is there a single headlamp option?
did you fix the hyperflash of the blinkers?
The blinkers are not hyperflashing. Only the indicators on the dash do. I pretty much got used to it. Someday I'll install a resistor in the blinker line and that should fix it.
@@UrbanMasterExperiment i read if you leave the hazard lights on for 45 seconds, it will help your situation. Try it
I gave that a try and unfortunately it didn't work on my bike. I made a short video, will upload it and share the link in a couple of days.
Here is the video
czcams.com/video/yHAFGPEz93k/video.html
Стоковая фара куда лучше смотрится!
I bought the turn signals as the ones you did, but the cap does not snap in. did you anything about it
Yeah, at first I thought that it would snap in too. Actually the LED plate is held by the lens. But make sure to coil the wires so they don't push out. Had it on my bike for over a year with no issues. Check that part in the video and it will make sense.
Is this a 7" headlight?
Yes