Accessing VW Mk3 02A shifter to replace shifter bushings in cabin
Vložit
- čas přidán 23. 07. 2024
- Buy Cabin Bushings here: www.dieselgeek.com/products/0...
In this short video Jim from Dieselegeek shows how to gain access to the shift mechanism inside of a Mk3 Jetta TDI. This is the same procedure for a Mk3 GTI VR6 and is very similar to all Corrados and B3 and B4 Passats. - Auta a dopravní prostředky
Thank you for showing how to access the shift linkage -I was stumped, and our city has no VW dealer, the nearest one is 350 miles away
very grateful ..thank you keep making more 02a shifter
You're the man! Very helpful, managed to do it myself thanks to you!
Very helpful thanks man
Thanks a bunch, I was wondering if it was possible to remove the shifter pivot bolt without dropping the box out of the car, personally I just tapped that lip down with a hammer, Thanks :)
Im having issues where the ball on the welded bracket keeps popping out of the guide when i put into reverse
Helppp I can not get my 2000 Jetta into reverse. Tried adjusting the cables just like your other video instructed and no luck. The car has done alot of sitting
the diesel geek guys are boss all their products are cheap compaired to a mechanic and will get you back on the road.
hey a bit of advise needed. I recently swapped a 02a in my mk2 but i have an issue with the shifter. it's how far i have to move it in order to get it in gear, first is a bit to the left as i should be reverse is a bit more and third is up. but fifth is really far from third so far that im struggling to got it in gear. now i don't think it is the adjustment, because if i move it just a little bit to the reverse side, it won't go into reverse. so do you have an idea what could be causing it?
i ofc also have to push down on the shifter to get it in reverse
If its not going into to gear as far as reverse and or 5th gear you may have to adjust the cable inside the motor area. There is a nut there you may have to adjust. I had to do this. Make small adjustments tighten the nut and have someone run thru the gears. The is for 1998-1999 bugs the newer ones are different.
Good day how can I get a kit for that same kind of shifter
The 02A bushing set is available from our website dieselgeek.com
what is the name or part number that you have in your hand in the 7:30 minute
@@dieselgeekdotcom thank you, good day
Can i swap an o2j on the Mk3 tdi?
Yup. You just need the transmission tower, shifter cable box and transmission mounting brackets.
Hope this will work for a 1996 VW jetta
@@dieselgeekdotcom my Jetta has a 2 liter, 4 cylinder engine.
what is the name or part number that you have in your hand in the 5:41 minute
The part i need is the plastic for a 1999 mexican Jetta mk4
What i need is the plastic white color that has the spring that is seen there
I am in México, my whastapp is 3541011878
@@dieselgeekdotcom thanks