Surfboard Art-How To Give Your Board a Cool Custom Spray | Compare Surfboards
Vložit
- čas přidán 10. 07. 2024
- Shop Surfboards, Fins & Gear (keep this free resource free):
AUS (Benny's Boardroom) - bennysboardroom.com.au/
USA (Jack's Surfboards) - www.avantlink.com/click.php?tt...
No pressure, but buying your gear through the above links helps us keep this free resource free! Thanks for your support!
You asked, we answered! This is a short DIY tutorial on Surfboard Art-How To Give Your Board a Cool Custom Spray for all of the fans and subscribers who have been admiring the custom spray paint jobs Craig adds to his boards. The process is straightforward and you can DIY in your backyard at home in about 10 minutes!
See the FULL Tutorial with Images & Descriptions: bit.ly/1VJRmS6
The process is simple:
1) Pick up your spray paint colours of choice, a sponge (e.g., car wash sponge) and a plastic bag to protect your hand while you paint
2) Decide on a pattern for your spray
3) Apply the spray paint to the sponge and apply to the board evenly
4) Allow 24 hours for the paint to fully dry
5) Use a very light grit wet/dry sand paper to smooth the finish
6) Add a tailpad (if that's your thing) and go!
7) From CZcams fan, Kalem: 'I would spray the whole board over with a clear acrylic spray paint with a few coats then lightly sand back with 1200 grade sandpaper, stops the paint scratching and fading over time' - Thanks Kalem!
Hope you enjoy this DIY tutorial on Surfboard Art-How To Give Your Board a Cool Custom Spray!
YOUR SUPPORT KEEPS US FROTHIN! Don't forget to Like, Share, Favourite this Video if you dig it!
We appreciate it!
All the best,
Benny
--------------
+ See the FULL Tutorial with Images & Descriptions: bit.ly/1VJRmS6
+ Subscribe to Get the Latest Reviews, Deals & Updates Direct from Benny and CompareSurfboards.com: bit.ly/SubscribeToFrothMail
--------------
Looking for a source of real, honest, objective information about surfboards and surfing products - based on actual experience from surfers?
Do you have a surfboard problem? Want to ride every shape and design of surfboard you see?
Need friendly advice on what product may work for you in a world of choice?
You’re not alone. There is a community of surfers here who are like you and are here to share the passion.
Welcome to Benny's Boardroom: REAL surfboard reviews & chronicles of a wave obsessed surfboard addict. New surfboard reviews each week, subscribe now!
If you’re a passionate surfer, are just trying to find out how a given surfboard or wetsuit will work for you or if you simply can’t resist the desire to ride every different shape and design of surfboard you see, you are in the right place.
Subscribe now to get access to the latest surfboard reviews and surf hardware reviews each week.
Visit www.CompareSurfboards.com/ for full reviews, news, articles and more!
Thank you for watching, I hope you enjoy the show.
HIT SUBSCRIBE NOW!
All the best,
Benny
I would spray the whole board over with a clear acrylic spray paint with a few coats then lightly sand back with 1200 grade sandpaper, stops the paint scratching and fading over time.
Did this to my board but with Posca Pens instead and its holding up perfectly and has a natural fiberglass looking finish to it
+Kalem Norris Good call, thanks Kalem! I'll add this to the description.
Cheers,
Benny
cheers bro this was really usefull, you are a genius!
Very cool design definitely doing this on my new stick
cool, thanks guys!
Interesting technique, I like it!
+Ho Stevie! Cheers Stevie, thanks for watching!
So after painting and clear coating have you experienced the tail pad not sticking as well or peel up? got a new stick for kitesurfing and wanna give it some personality but afraid that my full deck pads won't stick. Any advice? tnx
Will the traction pad still stick to the board
will the spray paint stay on during surf or do you need to put like a sealer above it.
Awesome vid, thanks guys. Was the video sped up or something?
hi, is it vital to sand the board before you spray paint it, because i want to spray my board my self and i dont want it to be stuffed up if i dont do good job sealing it with the clear spray
thanks
Yeww
FINALLY!
does he never seal it off?
+Dante Sellas No, but Kalem shared what he does to seal his boards after adding surfboard art to them!
Isn't the paint going to get everywhere after awhile in water or no
Once you've finished spray painting it like that should you spray like a gloss on top just to seal it?
Cooper Fong Clear acrylic spray paint
Can I paint inflatable paddle board?
Saw this board in real life the other week. Looks killer
+Stuart Sullivan Cool Stuart! You're in the Beaches I take it?
Yes, was at Freshy on a break here from Bali.
Craigs board really jumped out.
You can also use a sponge to wash the board down with water then add Posca then sponging it all over whilst still wet. Craigs Spray paint method seems easier maybe so that's good to know.
Ahh Same as Kalem, just saw that. Yeh it's easy. Cept you don't have to bother sanding back if you use White Knight Satin clear here in oz. Gives a decent finish alone.
Its awesome to see people having a crack at the paint more and more.
Is this just acrylic paint?
Does this make your board heavier?
it does, but by a negligible amount, don't worry about it in the slightest
how much is a surf board
How much is a car?
Fucking AWESOME!!I see a lot of plain white surfboards in shops. Is that because a lot of people paint their boards?
do you surf with bethnie hamilton and her friend or husband
Always wear latex gloves lol
that board looks pretty crappy, imo...not saying you couldn't do something cool incorporating this technique, but that board aint it
Totally what I was thinking. Dude seems cool....but that board....not so much.
clear coat it.....
Noooooo, a nice board ruined! :(
Thats a new carbon wrap!? Oh lord what are u doing
시발 ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ 보드를 존나조져놨넼ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ
Listen kids drugs don’t work
Not cool it is ugly
I thought it was supposed to be a cool paint job. You could train a monkey to do this job. Sorry JMO.
Maybe use some masking tape to add some character. Sorry mate, you screwed up a brand new board.