The Frame Pendant

Sdílet
Vložit
  • čas přidán 29. 09. 2021
  • #wirewrapping #wirewrap #jewelrymaking
    This wire wrapping project will give you the power to create a Statement Pendant highlighting multiple stones
    ***Be sure to check out all of the links below***
    Visit Us Online at - wirearteducation.com and Join The WrapMakers Club for more awesome Wire Wrap Video Tutorials.
    *Tools Needed*
    Wire Cutters (www.wirearteducation.com/tools-1)
    Wire Wrap Pliers or Flat Nose Pliers (www.wirearteducation.com/tools)
    Ruler or Measuring Tape
    Fine Tip Permanent Marker
    Flat Hand File or Flat Needle File (Flat File - amzn.to/2BETb3M)
    Round Nose Pliers
    Rotary Tool (Optional)(amzn.to/2P4jIdM)
    Silicone Rubber Polishing Disc (Optional)(www.wirearteducation.com/tools)
    Painters Tape
    Scissors
    Raw Hide Mallet(Optional)(www.wirearteducation.com/tools)
    Bench Block (Optional)(www.wirearteducation.com/tools)
    *Materials*
    29 inches of 18 gauge square wire of your choice
    18 gauge half round wire of your choice
    1 cabochons of your choice
    ***If you would like to purchase a pair of Wire Wrap Pliers like those shown in this video, please visit www.wirearteducation.com/tools-1
    Here are some links to explore-
    Please visit my WEBSITE - www.wirearteducation.com
    Check Out My Book “Wiresmithing - The New Look of Wire Art” - amzn.to/2MHQxyj
    Check Out My Book "WireWrapping - The Basics and Beyond” - amzn.to/2ZvnFel
    Check Out My Book "More Wirewrapping - The Basics and Beyond” - amzn.to/2Uf1iJp
    Check Out My Book “Wirewrapping with Wire and Metal” - amzn.to/2Ug73GD
  • Jak na to + styl

Komentáře • 19

  • @yvonne3742
    @yvonne3742 Před 28 dny

    Can you do more frames along with different kinds of copper wire designs to attach to the base please sweetheart thank you so much 🥰

  • @joycejacobs1808
    @joycejacobs1808 Před 2 lety +1

    Have been watching your videos and needless to say, I dug in my library and there was one of your books! Wiresmithing-The new Look of Wire Art. I immediately read it cover to cover. I found my wire and am ready to start. With confidence, due to your videos. Thank you. Will be joining up. Thank you for sharing your expertise.

  • @mjremy2605
    @mjremy2605 Před rokem +1

    I have not seen this frame type of setting before, and its very showy and frames the stone so well. I like the angularity of the square wire and frame too, not a big fan of curves and roundness. The prong setting looks sturdy and simple, and allows one to focus on a creative frame rather than worry about making a wire bezel. This is so unique. Thanks for the great tutorial and little tips like 'prongs should be a few mm above the stone', good stuff!

    • @JimMcIntosh
      @JimMcIntosh  Před rokem

      Thank you for watching and thank you for your kind words. I am all about finding new ways to use basic wire wrapping techniques to create jewelry. Thanks again.

  • @veliatorrez6523
    @veliatorrez6523 Před 2 lety +1

    Great job. Love your tutorials. Now if I can just finish all my quilting projects I can do some wire wrapping. Thank you.

    • @JimMcIntosh
      @JimMcIntosh  Před 2 lety

      Thank you for watching. I'm glad that you enjoyed the tutorial.

    • @mjremy2605
      @mjremy2605 Před rokem +1

      Why not do both side by side. I have multiple projects going on. Wire wrapping is not like making fine jewelry. Very small investment in tools and easy to start with no setup time or long drawn out technical processes. If you were making fine jewelry, then you need to devote all your time, but not with wire wrapping. Its like knitting. Pick it up and put it down whenever you want.

  • @halilkinjah1444
    @halilkinjah1444 Před 2 lety +1

    This is sooooo beautiful 😍💃 you are magicial.

    • @JimMcIntosh
      @JimMcIntosh  Před 2 lety

      Thank you very much. I'm glad that you like it.

  • @rosaelinav8036
    @rosaelinav8036 Před 2 lety +1

    Waiting 🙋‍♀️

  • @frankknighton6900
    @frankknighton6900 Před 4 měsíci +1

    Hi, haven't tried it yet, but would like to know to put a price on the jewelry?

    • @JimMcIntosh
      @JimMcIntosh  Před 4 měsíci

      Thank you for watching. When it comes to pricing there are a lot of things to keep in mind - cost of materials, time spent creating the piece, your experience, and what the market will bear. For the piece that I created in that video, I would put a price tag of $75 - $100+ on it.

  • @barbibeatty6610
    @barbibeatty6610 Před 2 lety +1

    Will you have the wrap maker pliers available again?

    • @JimMcIntosh
      @JimMcIntosh  Před 2 lety

      Very soon. I'm hoping to have a new stock by the end of April 2022

  • @bahcezar
    @bahcezar Před 2 lety +2

    Niceee and coll