Lexus IS250 | IS350 HID Conversion Kit Install & Headlight Bulb Replacement (06-13)

This is a step-by-step DIY tutorial for beginners. Unless your car came with OEM HID's, then you probably want to upgrade your headlights to the next generation. This is the simplest, cheapest route. I also discuss which type and style to choose. If you want to replace your OEM bulb, you can also do that with this video. This is relatively easy, so everyone can do it! Upgrade your cars visibility and aesthetics. Good luck.
Thanks for watching, and thank you for the support!
If this helped you out, SUBSCRIBE for more 🙃
PARTS AND TOOLS USED:
HEADLIGHTS AND HID KIT: amzn.to/41xbuiR
1" Step up drill bit: amzn.to/41fJfnK
Zip ties (multi pack): amzn.to/43ten4P
Basic 1/4" socket set (1/4 can probably get the bolt without extensions): amzn.to/3zRxmZd
More Lexus Videos:
Upgrade DIY to a Tesla-style 10.4" In-dash Android/Apple Multimedia System: • Lexus IS250 | IS350 An...
Easiest Starter Replacement DIY for the IS250: • Lexus IS250 | IS350 EA...
Replace your defective IS250/350 Rearview Mirror: • LEXUS IS250 | IS250 DE...
Program your Lexus Homelink Garage Door Controls: • LEXUS IS250 | IS350 GA...
CHAPTERS:
0:00 First steps
0:33 Selecting and HID kit and reasons to choose options
3:17 Step 1 - Removing the air box
4:36 Step 2 - Removing housing plate
4:51 Step 3 - Remove bulb
5:10 Bulb sizes and Step 4 - Drilling hole
5:57 Step 5 - Run new wires through plate
6:42 Step 6 - Install new bulb and housing plate
8:55 Step 7 - Plug in the HID ballast (passenger side) and test
10:15 Step 8 - Mount the ballast
11:34 Step 9 - Zip tie wiring (passenger side)
12:10 Step 10 - Driver’s side procedure
13:18 The ONE plug for OEM bulb replacement with NO HID
15:26 Driver’s side ballast mounting
17:03 Quick recap of the whole process and final thoughts
18:13 Difficulty Chart

[@rabinboedhoe3533]

Hi,one question,which h11 did you use? H11A of h11B?if you choose the wrong one it can cause a stripe because of the return wire?

[@fixitcolton]

Some Amazon links go dead. I'll post another, sorry. I believe these are the ones I bought. amzn.to/41xbuiR
They say "H11" so I'm assuming they default to H11A. I'm not in town, and I cannot verify with the car. Hope this works out for you. If not, I can possibly check in the new year.

[@trabafranklinparedes]

Boss I want to put led on low beam can I put h11 led??

[@fixitcolton]

For the 2006-2012 IS lines: If your car came with the OEM HID setup on the low beam, then the bulb size would be D4S. If your car came with OEM halogen bulbs, then the bulb size is H11. The high beam is 9005 (I believe) and the fog lights are 9006.
Therefore, if your car came with OEM halogen bulbs, then yes, you can put H11 bulbs in for the low beam. The LED bulbs are not something I've used before, but they look promising. Good luck.