How To Layout Common Roof Rafter With Framing Square Step Off Method - Part One
Vložit
- čas přidán 23. 05. 2022
- www.homebuildingandrepairs.co... Visit our website to find out more helpful information about your next home construction, remodeling or repair project. Here's another helpful video for do it yourselfer's who might be building a backyard shed, room addition or new home. The step off framing square method has been around for a long time and was used before calculators, but can still be used today.
Part Two - • How To Layout Common R... - Jak na to + styl
I find the margin of error grows exponentially with rafter length, using this method. On that very square are hypotenuse numbers per foot of run with all common roof pitches. Way easier! Love your videos
from Chile. the best explanation I have found to start learning his art. thank you very much for spreading your knowledge
Great to hear!
Thank you! You are a great teacher and I have learned so much from you!
You're welcome and thank you for the nice comment.
Great explanation! Thank you
Thank you.
Well done!
Thanks for watching!
Dont you have 2 take off more then 3/4 if the slope rises above a 4?
To account for the kiln dried 2x10 Kiln dried lumber ridge piece? No. If you are using standard K.D. framing lumber, you always only take half of the thickness of the ridge piece, which in the case of regular 2" K.D. lumber which is 1 1/2" thick, half of that would be 3/4". The pitch of the roof does not affect that. Hope that answers what you were asking about.
Hello my friend, your videos are fantastic, but I still haven't learned how to mark the bird's mouth cut

Then try to provide more details about the problem you're having or go to our website and watch a few more videos on roof framing and math.
Thanks for the video 👍📐
5.4 with curbature
What is rafter shoe
It could be a hanger or type of hardware that the rafter sits into. This is not a term that was used by most of the people I worked with.